Skip to content

Mbed OS device code for E2E Ecosystem Demo - sends data to Treasure Data, updatable via Pelion Device Management Service client

License

Notifications You must be signed in to change notification settings

BlackstoneEngineering/mbed-os-example-e2e-demo

Repository files navigation

What is this?

This program is a demonstration of how to take sensor readings on an Mbed OS board, then send those readings to Treasure Data and accept firmware updates using the Pelion Update Service. It is designed to be used in conjuntion with this repo: https://github.com/ARMmbed/E2E-demo

How to use

Initial Program

  1. Import the code mbed import [email protected]:BlackstoneEngineering/mbed-os-example-e2e-demo.git
  2. cd mbed-os-example-e2e-demo
  3. Add certs to the device mbed dm init -d "http://os.mbed.com" --model-name "modelname" -q --force (make sure you have setup your API key in your environment)
  4. Compile annd run on your device mbed compile --profile=uTensor/build_profile/release.json --flash; mbed sterm -b 115200

Update Firmware via Pelion Update Service

Your code should now be running on the device. Make sure to note your Pelion Endpoint ID that is printed out to the terminal

  1. Change the speed of the heartbeat function t.attach(heartbeat,0.2);
  2. Recompile the binary (but DO NOT FLASH it) mbed compile --profile=uTensor/build_profile/release.json.
  3. Issue an update mbed dm update device -D 0168e01408b300000000000xxxxxxx -m DISCO_F413ZH --profile=uTensor/build_profile/release.json -vv You will need to replace the string after -D with the device ID of the board you want to update. Now you should be able to see the update be issued to the board, then the board reboot and run the new image. I suggest changing the heartbeat speed to have a visual indicator.

Troubleshooting

  • If your update campaign gets stuck in 'draft' then you need to go to the pelion cloud interface and delete any 'active' campaigns that are blocking your campaign
  • Nuke the certs - holding down the 'USER' button then pressing reset. Keep holding user button untill main program starts, this will reset your update certs in the bootloader and reformat your file system for the connect certs
  • HTTPS POST errors (anything but 200) - double check your WiFi SSID / Password are set correctly in mbed_app.json.

About

Mbed OS device code for E2E Ecosystem Demo - sends data to Treasure Data, updatable via Pelion Device Management Service client

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published