ha-mqtt-discoverable

A python 3 module that takes advantage of Home Assistant's MQTT discovery protocol to create sensors without having to define anything on the HA side.

Using MQTT discoverable devices lets us add new sensors and devices to HA without having to restart HA. The ha-mqtt-discoverable-cli module includes scripts to make it easy to create discoverable devices from the command line if you don't want to bother writing python.

Table of Contents

• Installing
  • Python
• Supported entities
  • Binary sensor
    • Usage
  • Switch
    • Usage
  • Text
    • Usage
• Device
  • Usage
  • Device trigger
    • Usage
• Contributing
• Users of ha-mqtt-discoverable
• Contributors

Installing

Python

ha-mqtt-discoverable runs on Python 3.10 or later.

pip install ha-mqtt-discoverable if you want to use it in your own python scripts. This will also install the hmd utility scripts.

Supported entities

The following Home Assistant entities are currently implemented:

• Sensor
• Binary sensor
• Switch
• Button
• Device trigger

Each entity can associated to a device. See below for details.

Binary sensor

Usage

The following example creates a binary sensor and sets its state:

from ha_mqtt_discoverable import Settings
from ha_mqtt_discoverable.sensors import BinarySensor, BinarySensorInfo


# Configure the required parameters for the MQTT broker
mqtt_settings = Settings.MQTT(host="localhost")

# Information about the sensor
sensor_info = BinarySensorInfo(name="MySensor", device_class="motion")

settings = Settings(mqtt=mqtt_settings, entity=sensor_info)

# Instantiate the sensor
mysensor = BinarySensor(settings)

# Change the state of the sensor, publishing an MQTT message that gets picked up by HA
mysensor.on()
mysensor.off()

# You can also set custom attributes on the sensor via a Python dict
mysensor.set_attributes({"my attribute": "awesome"})

Switch

The switch is similar to a binary sensor, but in addition to publishing state changes toward HA it can also receive 'commands' from HA that request a state change. It is possible to act upon reception of this 'command', by defining a callback function, as the following example shows:

Usage

from ha_mqtt_discoverable import Settings
from ha_mqtt_discoverable.sensors import Switch, SwitchInfo
from paho.mqtt.client import Client, MQTTMessage

# Configure the required parameters for the MQTT broker
mqtt_settings = Settings.MQTT(host="localhost")

# Information about the switch
switch_info = SwitchInfo(name="test")

settings = Settings(mqtt=mqtt_settings, entity=switch_info)

# To receive state commands from HA, define a callback function:
def my_callback(client: Client, user_data, message: MQTTMessage):
    payload = message.payload.decode()
    if payload == "ON":
        turn_my_custom_thing_on()
        # Let HA know that the switch was successfully activated
	my_switch.on()
    elif payload == "OFF":
        turn_my_custom_thing_off()
        # Let HA know that the switch was successfully deactivated
	my_switch.off()

# Define an optional object to be passed back to the callback
user_data = "Some custom data"

# Instantiate the switch
my_switch = Switch(settings, my_callback, user_data)

# Set the initial state of the switch, which also makes it discoverable
my_switch.off()

Button

The button publishes no state, it simply receives a command from HA.

You must call write_config on a Button after creating it to make it discoverable.

from ha_mqtt_discoverable import Settings
from ha_mqtt_discoverable.sensors import Button, ButtonInfo
from paho.mqtt.client import Client, MQTTMessage

# Configure the required parameters for the MQTT broker
mqtt_settings = Settings.MQTT(host="localhost")

# Information about the button
button_info = ButtonInfo(name="test")

settings = Settings(mqtt=mqtt_settings, entity=button_info)

# To receive button commands from HA, define a callback function:
def my_callback(client: Client, user_data, message: MQTTMessage):
    perform_my_custom_action()

# Define an optional object to be passed back to the callback
user_data = "Some custom data"

# Instantiate the button
my_button = Button(settings, my_callback, user_data)

# Publish the button's discoverability message to let HA automatically notice it
my_button.write_config()

Text

The text is an helper entity, showing an input field in the HA UI that the user can interact with. It is possible to act upon reception of the inputted text by defining a callback function, as the following example shows:

Usage

from ha_mqtt_discoverable import Settings
from ha_mqtt_discoverable.sensors import Text, TextInfo
from paho.mqtt.client import Client, MQTTMessage

# Configure the required parameters for the MQTT broker
mqtt_settings = Settings.MQTT(host="localhost")

# Information about the `text` entity
text_info = TextInfo(name="test")

settings = Settings(mqtt=mqtt_settings, entity=text_info)

# To receive text updates from HA, define a callback function:
def my_callback(client: Client, user_data, message: MQTTMessage):
    text = message.payload.decode()
    logging.info(f"Received {text} from HA")
    do_some_custom_thing(text)
    # Send an MQTT message to confirm to HA that the text was changed
    my_text.set_text(text)

# Define an optional object to be passed back to the callback
user_data = "Some custom data"

# Instantiate the text
my_text = Text(settings, my_callback, user_data)

# Set the initial text displayed in HA UI, publishing an MQTT message that gets picked up by HA
my_text.set_text("Some awesome text")

Number

The number entity is similar to the text entity, but for a numeric value instead of a string. It is possible to act upon receiving changes in HA by defining a callback function, as the following example shows:

Usage

from ha_mqtt_discoverable import Settings
from ha_mqtt_discoverable.sensors import Number, NumberInfo
from paho.mqtt.client import Client, MQTTMessage

# Configure the required parameters for the MQTT broker
mqtt_settings = Settings.MQTT(host="localhost")

# Information about the `number` entity.
number_info = NumberInfo(name="test", min=0, max=50, mode="slider", step=5)

settings = Settings(mqtt=mqtt_settings, entity=number_info)

# To receive number updates from HA, define a callback function:
def my_callback(client: Client, user_data, message: MQTTMessage):
    number = int(message.payload.decode())
    logging.info(f"Received {number} from HA")
    do_some_custom_thing(number)
    # Send an MQTT message to confirm to HA that the number was changed
    my_text.set_value(number)

# Define an optional object to be passed back to the callback
user_data = "Some custom data"

# Instantiate the number
my_number = Number(settings, my_callback, user_data)

# Set the initial number displayed in HA UI, publishing an MQTT message that gets picked up by HA
my_number.set_value(42.0)

Device

From the Home Assistant documentation:

A device is a special entity in Home Assistant that is represented by one or more entities. A device is automatically created when an entity defines its device property. A device will be matched up with an existing device via supplied identifiers or connections, like serial numbers or MAC addresses.

Usage

The following example create a device, by associating multiple sensors to the same DeviceInfo instance.

from ha_mqtt_discoverable import Settings, DeviceInfo
from ha_mqtt_discoverable.sensors import BinarySensor, BinarySensorInfo

# Configure the required parameters for the MQTT broker
mqtt_settings = Settings.MQTT(host="localhost")

# Define the device. At least one of `identifiers` or `connections` must be supplied
device_info = DeviceInfo(name="My device", identifiers="device_id")

# Associate the sensor with the device via the `device` parameter
# `unique_id` must also be set, otherwise Home Assistant will not display the device in the UI
motion_sensor_info = BinarySensorInfo(name="My motion sensor", device_class="motion", unique_id="my_motion_sensor", device=device_info)

motion_settings = Settings(mqtt=mqtt_settings, entity=motion_sensor_info)

# Instantiate the sensor
motion_sensor = BinarySensor(motion_settings)

# Change the state of the sensor, publishing an MQTT message that gets picked up by HA
motion_sensor.on()

# An additional sensor can be added to the same device, by re-using the DeviceInfo instance previously defined
door_sensor_info = BinarySensorInfo(name="My door sensor", device_class="door", unique_id="my_door_sensor", device=device_info)
door_settings = Settings(mqtt=mqtt_settings, entity=door_sensor_info)

# Instantiate the sensor
door_sensor = BinarySensor(settings)

# Change the state of the sensor, publishing an MQTT message that gets picked up by HA
door_sensor.on()

# The two sensors should be visible inside Home Assistant under the device `My device`

Device trigger

The following example creates a device trigger and generates a trigger event:

Usage

from ha_mqtt_discoverable import Settings
from ha_mqtt_discoverable.sensors import DeviceInfo, DeviceTriggerInfo, DeviceTrigger

# Configure the required parameters for the MQTT broker
mqtt_settings = Settings.MQTT(host="localhost")

# Define the device. At least one of `identifiers` or `connections` must be supplied
device_info = DeviceInfo(name="My device", identifiers="device_id")

# Associate the sensor with the device via the `device` parameter
trigger_into = DeviceTriggerInfo(name="MyTrigger", type="button_press", subtype="button_1", unique_id="my_device_trigger", device=device_info)

settings = Settings(mqtt=mqtt_settings, entity=trigger_info)

# Instantiate the device trigger
mytrigger = DeviceTrigger(settings)

# Generate a device trigger event, publishing an MQTT message that gets picked up by HA
# Optionally include a payload as part of the event
mytrigger.trigger("My custom payload")

Contributing

Please run black on your code before submitting. There are git hooks already configured to run black and other checks before every commit, please run pre-commit install to enable them.

Users of ha-mqtt-discoverable

If you use this module for your own project, please add a link here.

• ha-mqtt-discoverable-cli - Command line tools that allow using this module from shell scripts

Contributors

Made with contributors-img.