DROID Reminds us that Ordinary Individuals can be Developers

DROID is a web-based interface for working with (1) a build system, managed by (2) a version control system. The current version of DROID is designed to work with (1) GNU Make and (2) GitHub. Our goal is to make these systems accessible to a wider community of project contributors, by exposing a curated set of functionality that is customized for each project.

DROID differs from Continuous Testing/Integration solutions such as Jenkins or Travis CI because DROID allows users to modify a working copy of a branch and run tasks on an ad-hoc basis before committing changes, optionally in a Docker container dedicated to the branch. DROID differs from Web/Cloud IDEs because users are limited to a specified set of files and tasks.

DROID can operate in either local or server mode. When DROID is configured to run in local mode, all GitHub authentication is performed on behalf of a single GitHub user account that is identified via that user's personal access token. When configured to run in server mode, DROID will allow multiple distinct GitHub users to be logged into the system simultaneously, using GitHub App authentication to authenticate users.

DROID is designed to work on UNIX (Linux, macOS, FreeBSD, etc.) systems.

Installation and configuration

The following installation and configuration instructions have been written for Debian GNU/Linux (specifically, the buster release) but they should be reasonably straightforward to adapt to other flavours of UNIX (other Linux distributions, macOS, FreeBSD, etc.)

Prerequisites

DROID requires the following packages to be installed:
- git for command-line interaction with project repositories, locally and remotely via GitHub.
- leiningen to generate the DROID executable.
- openjdk or equivalent (>= Version 8)
- docker.io for docker integration
- aha for colourizing console output.
On Debian Buster you can install these packages using apt-get in the following way:
```
 $ sudo apt-get update && sudo apt-get -y install git leiningen openjdk-11-jdk docker.io aha
```
For docker to work properly, you must make sure to add the user who will be running DROID to the docker group:
```
 $ sudo usermod -aG docker $USER
```
After adding yourself to the docker group, you must logout and then log back in for that change to take effect. Verify that the user is a member of the docker group by running the groups command. Make sure that the docker group appears in the list of groups to which the user belongs:
```
 $ groups
 group1 group2 ... docker
```
Running DROID in local mode requires the prior setup of a personal access token. Running DROID in server mode requires the creation and installation of a GitHub App. For more information see the section called GitHub Authentication below. Once you have created your GitHub App and/or personal access token (or have received information concerning these from whoever did create them), continue with the section called Installation below.

Installation

Create the DROID executable

Clone DROID's GitHub repository into a directory of your choice (e.g., ~/DROID).
```
 $ git clone https://github.com/ontodev/droid.git ~/DROID
```
Change to the newly created directory:
```
 $ cd ~/DROID
```

Run the install.sh script:

 $ ./install.sh

You will see warnings and errors like:

 WARNING - config.edn not found. Using example-config.edn. 
 2021-02-14 09:56:55.802-0500 - ERROR :github-client-id must be set for non-local-mode
 2021-02-14 09:56:55.805-0500 - ERROR :github-client-secret must be set for non-local-mode

These can be safely ignored at this time. Section Configuration contains instructions for configuring DROID.

Assuming install.sh completes successfully, you should see the following (note that instead of DROID_DIR you will see the name of the directory that you cloned the DROID source code into in step 1 above).

 Generating DROID wrapper ...
 Done. DROID wrapper generated in DROID_DIR/droid.
 Make sure to include DROID_DIR in your environment variable PATH before running droid.

Now set your path variable as follows (replacing DROID_DIR with the directory you cloned DROID into in step 1):
```
 $ export PATH=$PATH:DROID_DIR
```
You should add this line to your .bashrc or .profile file to make sure that DROID's path is included whenever you login.

You can now run droid --help to see the command-line options available. Running droid without any options will start the server. Before doing so, please see the section called Configuration below.

Configuration

If you have not already gone through the section called Installation, please go through that first.

DROID assumes that a file called config.edn exists in DROID's root directory. You can find an example in: example-config.edn. Before running DROID for the first time, you should create config.edn. (If this file does not exist, DROID will still run using the defaults contained in example-config.edn, but this is not very useful as that file contains no specific project configuration).

Manual configuration

DROID provides an optional setup wizard to guide you through setting up a config.edn file. This is discussed in the section called Configuring DROID using the setup wizard. If you are already familiar with DROID's configuration options, however, then you can use the following method instead. First, in DROID's main directory, copy the example configuration file to a file named config.edn:

	$ cd DROID_DIR/
	$ cp example-config.edn config.edn

Then edit the newly created config.edn file as necessary. The file includes extensive documentation which should make specific configuration changes easier.

Configuring DROID using the setup wizard

To initialize a new config.edn using DROID's optional setup wizard, run droid with the command-line switch: --init-config and answer the questions that follow. You can also use the setup wizard non-interactively (see the section called Configuring DROID using the setup wizard non-interactively below). The following is an example of a typical (interactive) run of the setup wizard:

 $ droid --init-config
 WARNING - config.edn not found. Using example-config.edn. 
 2021-02-14 11:14:37.486-0500 - ERROR :github-client-id must be set for non-local-mode
 2021-02-14 11:14:37.493-0500 - ERROR :github-client-secret must be set for non-local-mode
 2021-02-14 11:14:37.905-0500 - INFO Checking root-level configuration ...
 2021-02-14 11:14:37.911-0500 - INFO Checking root-level docker configuration ...
 2021-02-14 11:14:37.912-0500 - INFO Checking configuration for project project1 ...
 2021-02-14 11:14:37.913-0500 - INFO Checking docker configuration for project project1 ...
 2021-02-14 11:14:37.917-0500 - INFO Checking configuration for project project2 ...
 2021-02-14 11:14:37.918-0500 - INFO Checking docker configuration for project project2 ...

Since we haven't yet created our config.edn file, you can ignore the errors and warnings above. Once these initial checks have completed, the setup wizard will ask if you would like to configure DROID to run in local mode (or in server mode). Pressing Enter implies the default answer of 'N', which means that DROID will be configured for server mode.

 DROID can run in local mode, in which case you will need to set the environment
 variable PERSONAL_ACCESS_TOKEN to the value of the GitHub personal access token
 (PAT) that will be used for authentication. A PAT is associated with a single
 user, who will own all GitHub actions performed by DROID. Alternately, DROID
 can run in server mode, in which case you will be asked to supply a GitHub App
 ID and PEM file to use for authentication to GitHub on behalf of the currently
 logged in user.
 Should DROID run in local mode?
 [Default: N]
 > N

If you selected local mode then you can skip to step 4, otherwise continue on with the next step.

If you have chosen to configure DROID for server mode, the setup wizard will now ask you to provide a GitHub App ID and PEM file. These are needed by DROID to authenticate to GitHub on behalf of a logged in user. Someone may have already supplied you with this information. If so you can enter it now. Otherwise follow the steps in Sections Creating a new GitHub App, Generating a private key for your GitHub App, and Installing your GitHub App on a project repository.
```
 Enter the GitHub App ID to use for authentication.
 > 12345

 Enter the name of the .pem file (relative to /home/mike/DROID)
 to use for GitHub App authentication.
 > myfile.pem
```
If you have chosen to configure DROID for server mode, you will now be asked for a list of site-administrators. These GitHub users will have access to various general administration functions within DROID. (In local mode, DROID is set up for a single user only, who is implicitly considered to be a site administrator, so this option is inapplicable).
```
 Enter a comma-separated list of GitHub userids that DROID should consider to be
 site administrators.
 [Default: None]
 > lmcmicu,jamesaoverton,rctauber
```
Next we are asked for the port number that DROID will receive HTTP requests on. This must be specified for both local and server mode:
```
 Enter the port # that the server will listen on.
 [Default: 8090]
 > 8090
```
Next we are asked whether DROID should use the HTTP (insecure) or HTTPS (secure) protocol:
```
 Use HTTPS? (y/n)
 [Default: Y]
 > 
```

Next, we can configure individual projects. Begin by supplying the GitHub coordinates, i.e., the part that comes after github.com in the URL of the GitHub repository for the project.

 Configure a new project? (y/n)
 [Default: N]
 > y

 Enter the github coordinates for the new project. The is the part of the URL
 for the project repository that comes after github.com/,e.g.,
 https://github.com/GITHUB_COORDINATES, where GITHUB_COORDINATES is of the
 form: '<org or owner>/<repository name>' and contains no spaces or special
 characters other than '/', '_','-'.
 > lmcmicu/my-project

This initiates a configuration block with (in the example above) the keyword lmcmicu-my-project ('/' replaced by '-') that will be included in config.edn.

The next set of questions relate to the use of Docker in the specified project. DROID can be configured to run processes in Docker containers, where each container is dedicated to running processes in a particular Git branch of the project. If you want to enable docker for the project currently being configured, answer Y and select the desired docker image to use when creating the project's containers, otherwise answer N. Note that in addition to configuring a default image for the project, it is also possible for individual branches in a project to use their own customized docker image. See the section below entitled Using branch-specific docker images.
```
 Do you want to enable docker for: lmcmicu-my-project? (y/n)
 [Default: N]
 > y

 Enter the docker image to use when creating containers for project: lmcmicu-my-project
 [Default: debian:buster]
 > obolibrary/odkfull
```

If you want to configure another project, answer Y to the next question and repeat steps 6–7, otherwise answer N.

 Configure a new project? (y/n)
 [Default: N]
 > n
 New configuration written to config.edn. You should now edit this file in your 
 favorite editor to further specify configuration parameters like project 
 titles, custom makefile paths, etc.

You now have the minimal configuration required to work with whatever projects you happen to have configured in steps 6–7. You will probably want to manually edit config.edn for further tweaks, however. At a minimum you will likely want to change :project-title and :project-description for the projects you configured in steps 6–7. The generated config.edn file includes documentation for all of the available configuration parameters, including these ones.

Validating your configuration

Whenever you make manual changes to config.edn, you should then run droid with the --check-config option:

    $ droid --check-config
    2021-02-16 11:07:03.424-0500 - ERROR :github-client-id must be set for non-local-mode
    2021-02-16 11:07:03.427-0500 - ERROR :github-client-secret must be set for non-local-mode
    2021-02-16 11:07:03.876-0500 - INFO Checking root-level configuration ...
    2021-02-16 11:07:03.879-0500 - INFO Checking root-level docker configuration ...
    2021-02-16 11:07:03.879-0500 - INFO Checking configuration for project lmcmicu-my-project ...
    2021-02-16 11:07:03.880-0500 - INFO Checking docker configuration for project lmcmicu-my-project ...
    Environment error: Local mode disabled but environment variable GITHUB_CLIENT_ID not set.
    Environment error: Local mode disabled but environment variable GITHUB_CLIENT_SECRET not set.
    Environment error: PEM file: myfile.pem does not exist

In this case we see that DROID is complaining that the environment variables GITHUB_CLIENT_ID and GITHUB_CLIENT_SECRET are not defined, and that the given PEM file does not exist. These are all necessary to run DROID in server mode but you need to explicitly set them to enable DROID to read them. If, on the other hand, we had configured DROID for local mode, but did not set the environment variable, PERSONALL_ACCESS_TOKEN, we would have received an error relating to it instead. The --check-config validation considers all of these to be Environment errors (a file is not an environment variable, but it is still part of DROID's operating environment). Such errors indicate that the configuration specified in config.edn was successfully validated, but that elements of the environment that are additionally required for DROID's operation are not present. To configure these environment elements for server mode and local mode, respectively, see the sections Configuring DROID for server mode and Configuring DROID for local mode.

Running droid --check-config may also result in Configuration errors, which are errors in config.edn itself. For example, open config.edn in your favourite editor and change the following line:

:push-with-installation-token false

to:

:push-with-installation-token "false"

If we now validate the config file we will see the following configuration error:

$ droid --check-config
2021-02-16 11:18:52.548-0500 - INFO Checking root-level configuration ...
Configuration error: Configuration parameter :push-with-installation-token has invalid type: class java.lang.String (valid types are: [java.lang.Boolean] )

This error indicates that the configuration parameter :push-with-installation-token has been supplied a value of the wrong type. In this case we need to remove the quotation marks around false.

In some cases DROID may not even be able to read the configuration file as a result of a syntax error. In this case you will see an error like:

ERROR reading config.edn: <error message>

Configuring DROID for local mode using a personal access token

When DROID is configured to run in local mode, all GitHub authentication will be performed on behalf of a single github user account that is identified via that user's personal access token. For instructions on how to create a personal access token for your GitHub account, see the section called Creating a personal access token.

Once you have created a personal access token, you will need to set the environment variable PERSONAL_ACCESS_TOKEN with the value of your newly created token whenever running DROID. The easiest way to do this is to place a line like the following in your ~/.bashrc file (or in some other "secrets" file that is read either at login or right before running DROID):

$ export PERSONAL_ACCESS_TOKEN=your_token

Remember that after editing ~/.bashrc you should either logout and login again or run

$ source ~/.bashrc

to load the new environment variable.

If you would like to configure DROID to start automatically when your computer boots, see the section Setting up DROID as a systemd service below.

Configuring DROID for server mode

When configured to run in server mode, DROID will allow multiple distinct GitHub users to be logged into the system simultaneously. Note that DROID only allows one process to run per project branch at any one time.

In server mode, DROID uses GitHub Apps to authenticate on behalf of a logged in github user (for more information, see this page).

For this to work properly, DROID assumes that:

A private key file exists and has been saved somewhere accessible to DROID. Its location must be indicated in config.edn using the parameter :pem-file (see Section Configuration).
The following environment variables have been set:
- GITHUB_CLIENT_ID
- GITHUB_CLIENT_SECRET
- GITHUB_APP_STATE

where:

GITHUB_APP_STATE can be set to any random string.
GITHUB_CLIENT_ID, GITHUB_CLIENT_SECRET, and the private key file are all associated with a particular GitHub App. If you have not already created a GitHub App and generated your private key file (and no one else has done this for you), see the sections: Creating a new GitHub App, Generating a private key for your GitHub App, and Installing your GitHub App on a project repository.

Now that you know your GitHub client ID and secret, have generated your private key file, and indicated its location in config.edn (either by using the setup wizard or manually), you will need to set the environment variables: GITHUB_CLIENT_ID, GITHUB_CLIENT_SECRET, and GITUB_APP_STATE before running DROID. The easiest way to do this is to place lines like the following in your ~/.bashrc file (or in some other "secrets" file that is read either at login or right before running DROID):

$ export GITHUB_CLIENT_ID=your_github_client_id
$ export GITHUB_CLIENT_SECRET=your_github_client_secret
$ export GITHUB_APP_STATE=random_string

Remember that after editing ~/.bashrc you should either logout and login again or run

$ source ~/.bashrc

to load the new environment variables.

If you would like to configure DROID to start automatically when your computer boots, see the section Setting up DROID as a systemd service below.

Configuring DROID using the setup wizard non-interactively

When running DROID with the --init-config option, some or all of the following command-line arguments may optionally be supplied as well: --port, --site-admins, --local-mode, --github-app-id, --pem-file, --project-github-coords, --enable-project-docker, and --project-docker-image.

In the case where some parameter, param2, is inapplicable given the presence of some other parameter, param1, DROID ignores the value of param2. For instance, in the following example, the value of --project-docker-image will be ignored because --enable-project-docker has been set to false:

$ droid --init-config --enable-project-docker=false --project-docker-image=myimage

If one or more of the available further options to --init-config has not been specified, and it is not inapplicable given the other specified options, DROID will interactively ask the user to supply the value of that parameter. In the following example, for instance, because --port and --local-mode have been specified on the command-line, these questions do not need to be asked, but DROID will still give the user the opportunity to define one or more project configuration(s):

$ droid --init-config --port=8090 --local-mode=true
WARNING - config.edn not found. Using example-config.edn. 
2021-02-19 10:57:29.927-0500 - INFO Checking root-level configuration ...
2021-02-19 10:57:29.929-0500 - INFO Checking root-level docker configuration ...
2021-02-19 10:57:29.930-0500 - INFO Checking configuration for project project1 ...
2021-02-19 10:57:29.930-0500 - INFO Checking docker configuration for project project1 ...
2021-02-19 10:57:29.931-0500 - INFO Checking configuration for project project2 ...
2021-02-19 10:57:29.932-0500 - INFO Checking docker configuration for project project2 ...

Configure a new project? (y/n)
[Default: N]
> y

Enter the github coordinates for the new project. The is the part of the URL
for the project repository that comes after github.com/,e.g.,
https://github.com/GITHUB_COORDINATES, where GITHUB_COORDINATES is of the
form: '<org or owner>/<repository name>' and contains no spaces or special
characters other than '/', '_','-'.
> myorg/myrepo

Do you want to enable docker for: myorg-myrepo? (y/n)
[Default: N]
> 

Configure a new project? (y/n)
[Default: N]
> 
New configuration written to config.edn. You should now edit this file in your 
favorite editor to further specify configuration parameters like project 
titles, custom makefile paths, etc.

Note that, only one project configuration may be specified non-interactively (as opposed to indefinitely many when running --init-config interactively):

$ droid --init-config --port=8090 --local-mode=true --project-github-coords=myorg/myrepo --enable-project-docker=false
WARNING - config.edn not found. Using example-config.edn. 
2021-02-19 11:03:57.363-0500 - INFO Checking root-level configuration ...
2021-02-19 11:03:57.372-0500 - INFO Checking root-level docker configuration ...
2021-02-19 11:03:57.373-0500 - INFO Checking configuration for project project1 ...
2021-02-19 11:03:57.378-0500 - INFO Checking docker configuration for project project1 ...
2021-02-19 11:03:57.378-0500 - INFO Checking configuration for project project2 ...
2021-02-19 11:03:57.379-0500 - INFO Checking docker configuration for project project2 ...
New configuration written to config.edn. You should now edit this file in your 
favorite editor to further specify configuration parameters like project 
titles, custom makefile paths, etc.

Dumping the current configuration

To dump the currently configured parameters to STDOUT, call the server executable using the command-line switch: --dump-config. If you want to save the dumped configuration to a file, redirect the output as in the following example:

	$ droid --dump-config > config-2021-02-16.edn

The `projects/` directory

DROID assumes that there exists a directory called projects/ within its root directory. Within projects/ there should be a subdirectory corresponding to each project defined in config.edn (see above). Within each individual project directory there should be a workspace/ directory. Within each project's workspace/ directory there should be a subdirectory corresponding to each branch managed by the project. Finally, each branch directory should contain, at a minimum, a Makefile. Optionally a branch can also include a Dockerfile (see Using branch-specific docker images). For example:

projects/
├── project1/
│   └── workspace/
│       ├── branch1/
│       │   └── Makefile
│       │   └── Dockerfile (optional)
│       │   └── ...
│       └── branch2/
│           └── Makefile
│           └── Dockerfile (optional)
│           └── ...
└── project2/
    └── workspace/
        ├── branch1/
        │   └── Makefile
        |   └── Dockerfile (optional)
        │   └── ...
        └── branch2/
            └── Makefile
            └── Dockerfile (optional)
            └── ...

The project1/, project2/, etc. directories (and their subdirectories) should be writable by DROID.

Using branch-specific docker images

By default, branch containers for a particular project are created using the image selected by the user for the project during the configuration stage. This project-default image can be overridden (or customised) by adding a file called Dockerfile to the root directory. For Dockerfile syntax, see https://docs.docker.com/engine/reference/builder/#format.

GitHub Authentication

Creating a personal access token

To create a personal access token in GitHub, follow the step-by-step instructions on this page. Note, when creating your personal access token, that DROID requires at a minimum, public_repo permission.

Screenshot of minimal repository permissions required by DROID

Creating a new GitHub App

To create your own GitHub App to use with DROID, follow the step-by-step instructions on this page, noting the following (see also the screenshots below this list):

The Homepage URL should be set to https://github.com/ontodev/droid
The Callback URL should be set to <protocol>://<server-address:server-port>/oauth2/github/callback where <protocol> is either http or https.
Expire user authorization tokens should be unchecked.
Webhooks should be disabled.
Make sure that the DROID App has, at a minimum, the following permissions:
- Contents: read & write
- Metadata: read only
- Pull requests: read & write
You can allow the GitHub App to be installed only on your own account (i.e., allow it to access only repositories that are owned by you), or you can allow it to be installed on any account. If you want to use DROID to work on project repositories that are owned by other users and/or organisations, you need to allow the GitHub App to be installed on any account.

Generating a private key for your GitHub App

After creating your GitHub App, take note of the App ID and Client ID. The Client ID will be used to define the value of the environment variable GITHUB_CLIENT_ID (see Configuration). The value of App ID should be placed inside config.edn as the parameter :github-app-id. This can be done either manually or using the setup wizard (see Configuration).

Screenshot of successful GitHub App Creation

Click on the button Generate a new client secret and take note of the generated string. You will need to set the environment variable GITHUB_CLIENT_SECRET with this value (see Configuration).

Click on the button: Generate a private key

Screenshot of generate private key button

Save the file in DROID's main directory (the directory you cloned DROID into earlier (see the section called Create the DROID executable above)).

Screenshot of successful private key generation

The name of the newly generated .pem file should now be added to config.edn as the parameter :pem-file. This can be done either manually or using the setup wizard (see Configuration).

Installing your GitHub App on a project repository

To use your new GitHub App with various project repositories, you need to "install" the App on those repositories. Click on the Install App tab.

Choose the account that owns the repository/repositories that you want to install your GitHub App on.

Install your App to specific repositories owned by the selected account, or to all current and future repositories owned by the account, and then click on Install & Request. (Note: If you are the owner of the account that the GitHub App will be installed to, the button will just read Install.) The owner of the account will have to approve your installation request before you can use your new GitHub App on the selected repositories.

Setting up DROID as a systemd service

Edit the file droid.service located in DROID's main directrory and make the following edits:

a. Replace UNIX_USER with the username of the system user that will be used to run DROID.

b. Replace DROID_DIR with the directory you cloned DROID into earlier (see the section called Create the DROID executable above).

c. If DROID has been configured to run in local mode, replace the line:
```
 	Environment="PERSONAL_ACCESS_TOKEN="

 	with:

 	Environment="PERSONAL_ACCESS_TOKEN=YOUR_TOKEN"
```
where YOUR_TOKEN is the actual value of your personal access token. To create a personal access token, see the section called Creating a personal access token.

d. If DROID has been configured to run in server mode, replace the lines:
```
 	Environment="GITHUB_APP_STATE="
 	Environment="GITHUB_CLIENT_ID="
 	Environment="GITHUB_CLIENT_SECRET="
     
     with:

 	Environment="GITHUB_APP_STATE=RANDOM_STRING"
 	Environment="GITHUB_CLIENT_ID=YOUR_CLIENT_ID"
 	Environment="GITHUB_CLIENT_SECRET=YOUR_CLIENT_SECRET"
```
where RANDOM_STRING can be any random string, and YOUR_CLIENT_ID and YOUR_CLIENT_SECRET are associated with the GitHub App that you will be using for authentication. For instructions on how to create a GitHub App, see the sections above called: Creating a new GitHub App and Generating a private key for your GitHub App.
As root, copy the file droid.service to the /etc/systemd/system/ directory:
```
 $ sudo cp droid.service /etc/systemd/system/
```
Start the service:
```
 $ sudo systemctl start droid
```

Verify that the DROID service has started correctly:

 $ systemctl status droid
 ● droid.service - DROID Reminds us that Ordinary Individuals can be Developers
    Loaded: loaded (/etc/systemd/system/droid.service; disabled; vendor preset: enabled)
    Active: active (running) since Sun 2021-02-21 12:43:44 EST; 2min 23s ago
  Main PID: 1336 (java)
     Tasks: 13 (limit: 1149)
    Memory: 155.8M
    CGroup: /system.slice/droid.service
    └─1336 java -jar /home/mike/DROID/target/uberjar/droid-0.1.0-SNAPSHOT-standalone.jar

If DROID has started successfully it should say active (running).

Enable the service so that it will start automatically when your system boots:
```
 $ sudo systemctl enable droid
```
DROID's log can be configured to be written to a particular file using the parameter :log-file in config.edn. If this is not set, DROID will output log statements to STDERR. In the latter case, you may monitor them using the journalctl command as follows:
```
 $ sudo journalctl -f -u droid.service
```

Troubleshooting

Inspecting the log

It is often possible to identify and resolve issues by inspecting DROID's log file. The location of the file can be configured using the parameter :log-file in config.edn. If :log-file is not set (or set to nil), then the log will be written to STDERR. If DROID has been set up to run as a service, the log can be viewed using the command:

    $ sudo journalctl -f -u droid.service

Otherwise if :log-file is set to a particular file, then the log can be opened in your favourite text editor and inspected, or it can be followed using tail:

    $ tail -f LOG_FILE

Logging levels

By default, DROID is set to log only information, warning, and error messages. Sometimes, however, it can be useful for troubleshooting certain errors to enable more verbose logging. This behaviour can be controlled using DROID's configuration file config.edn. To do so, edit the file and set the parameter :log-level to :debug.

DROID can also be configured to be even less verbose by setting the logging level to :warn, :error, or :critical, though this is not recommended. For normal operation it is recommended to set the logging level to :info, and to use the :debug setting for troubleshooting as the need arises.

Note that after making changes to config.edn, the DROID server must be restarted. If you have set up DROID as a systemd service, it can be reatarted by running:

    $ sudo systemctl restart droid

Name		Name	Last commit message	Last commit date
Latest commit History 350 Commits
screenshots		screenshots
src/droid		src/droid
test		test
.gitignore		.gitignore
LICENSE		LICENSE
README.md		README.md
droid.service		droid.service
example-config.edn		example-config.edn
install.sh		install.sh
project.clj		project.clj

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

DROID Reminds us that Ordinary Individuals can be Developers

Table of contents

Installation and configuration

Prerequisites

Installation

Create the DROID executable

Configuration

Manual configuration

Configuring DROID using the setup wizard

Validating your configuration

Configuring DROID for local mode using a personal access token

Configuring DROID for server mode

Configuring DROID using the setup wizard non-interactively

Dumping the current configuration

The `projects/` directory

Using branch-specific docker images

GitHub Authentication

Creating a personal access token

Creating a new GitHub App

Generating a private key for your GitHub App

Installing your GitHub App on a project repository

Setting up DROID as a systemd service

Troubleshooting

Inspecting the log

Logging levels

About

Releases

Packages

Languages

License

IHCC-cohorts/droid

Folders and files

Latest commit

History

Repository files navigation

DROID Reminds us that Ordinary Individuals can be Developers

Table of contents

Installation and configuration

Prerequisites

Installation

Create the DROID executable

Configuration

Manual configuration

Configuring DROID using the setup wizard

Validating your configuration

Configuring DROID for local mode using a personal access token

Configuring DROID for server mode

Configuring DROID using the setup wizard non-interactively

Dumping the current configuration

The projects/ directory

Using branch-specific docker images

GitHub Authentication

Creating a personal access token

Creating a new GitHub App

Generating a private key for your GitHub App

Installing your GitHub App on a project repository

Setting up DROID as a systemd service

Troubleshooting

Inspecting the log

Logging levels

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

The `projects/` directory

Packages