Merge pull request #55 from PedroAntunes178/master #108

Workflow file for this run

	name: CI

	# Set default shell as interactive (source ~/.bashrc)
	defaults:
	run:
	shell: bash -ieo pipefail {0}

	# Run only one instance of this workflow at a time
	# cancel-in-progress: stop running workflow and run latest instead
	concurrency:
	group: ${{ github.workflow }}-${{ github.ref }}
	cancel-in-progress: true

	on:
	push:
	branches:
	- master
	- python-setup
	# Don't forget to require approval for all outside collaborators
	pull_request:
	branches: '*'
	# Allow manual workflow runs
	workflow_dispatch:

	jobs:
	# Disable pc-emul because PLIC and CLINT do not have pc-emul drivers (yet)
	#pc-emul:
	# runs-on: self-hosted
	# timeout-minutes: 5

	# steps:
	# - uses: actions/checkout@v3
	# with:
	# submodules: 'recursive'
	# - name: clean
	# run: make clean
	# - name: setup
	# run: nix-shell --run "make setup"
	# - name: pc-emul test
	# run: make -C ../iob_soc_o* pc-emul-test

	verilator-baremetal:
	runs-on: self-hosted
	timeout-minutes: 30
	# run even if previous job failed
	if: ${{ !cancelled() }}
	# run after indicated job
	#needs: [ pc-emul ]

	steps:
	- uses: actions/checkout@v3
	with:
	submodules: 'recursive'
	# IOb-SoC-Opencryptolinux only supports USE_EXTMEM=1
	## Init mem
	#- name: clean
	# run: nix-shell --run "make clean"
	#- name: setup init_mem
	# run: nix-shell --run "make setup RUN_LINUX=0"
	#- name: verilator test
	# run: nix-shell --run "make -C ../iob_soc_o* sim-test SIMULATOR=verilator"
	## No init mem
	#- name: clean
	# run: nix-shell --run "make clean"
	#- name: setup
	# run: nix-shell --run "make setup RUN_LINUX=0 INIT_MEM=0"
	#- name: verilator test
	# run: nix-shell --run "make -C ../iob_soc_o* sim-test SIMULATOR=verilator"
	# Init mem and Ext mem
	- name: clean
	run: nix-shell --run "make clean"
	- name: setup init_mem ext_mem
	run: nix-shell --run "make setup RUN_LINUX=0 INIT_MEM=1 USE_EXTMEM=1"
	- name: verilator test
	run: nix-shell --run "make -C ../iob_soc_o* sim-test SIMULATOR=verilator"
	# Test without init mem takes too long
	# No init mem and Ext mem
	#- name: clean
	# run: nix-shell --run "make clean"
	#- name: setup ext_mem
	# run: nix-shell --run "make setup RUN_LINUX=0 INIT_MEM=0 USE_EXTMEM=1"
	#- name: verilator test
	# run: nix-shell --run "make -C ../iob_soc_o* sim-test SIMULATOR=verilator"

	verilator-linux:
	runs-on: self-hosted
	timeout-minutes: 30
	# run even if previous job failed
	if: ${{ !cancelled() }}
	# run after indicated job
	#needs: [ pc-emul ]

	steps:
	- uses: actions/checkout@v3
	with:
	submodules: 'recursive'
	# IOb-SoC-Opencryptolinux only supports USE_EXTMEM=1
	## Init mem
	#- name: clean
	# run: nix-shell --run "make clean"
	#- name: setup init_mem
	# run: nix-shell --run "make setup"
	#- name: verilator test
	# run: nix-shell --run "make -C ../iob_soc_o* sim-test SIMULATOR=verilator"
	## No init mem
	#- name: clean
	# run: nix-shell --run "make clean"
	#- name: setup
	# run: nix-shell --run "make setup INIT_MEM=0"
	#- name: verilator test
	# run: nix-shell --run "make -C ../iob_soc_o* sim-test SIMULATOR=verilator"
	# Init mem and Ext mem
	- name: clean
	run: nix-shell --run "make clean"
	- name: setup init_mem ext_mem
	run: nix-shell --run "make setup INIT_MEM=1 USE_EXTMEM=1"
	- name: verilator test
	run: nix-shell --run "make -C ../iob_soc_o* sim-test SIMULATOR=verilator"
	# Test without init mem takes too long
	# No init mem and Ext mem
	#- name: clean
	# run: nix-shell --run "make clean"
	#- name: setup ext_mem
	# run: nix-shell --run "make setup INIT_MEM=0 USE_EXTMEM=1"
	#- name: verilator test
	# run: nix-shell --run "make -C ../iob_soc_o* sim-test SIMULATOR=verilator"

	cyclonev-baremetal:
	runs-on: self-hosted
	timeout-minutes: 60
	if: ${{ !cancelled() }}
	needs: [ verilator-baremetal ]

	steps:
	- uses: actions/checkout@v3
	with:
	submodules: 'recursive'
	# IOb-SoC-Opencryptolinux only supports USE_EXTMEM=1
	## Init mem
	#- name: clean
	# run: nix-shell --run "make clean"
	#- name: setup init_mem
	# run: nix-shell --run "make setup RUN_LINUX=0"
	#- name: cyclonev test
	# run: make -C ../iob_soc_o* fpga-test BOARD=CYCLONEV-GT-DK
	## No init mem
	#- name: clean
	# run: nix-shell --run "make clean"
	#- name: setup
	# run: nix-shell --run "make setup RUN_LINUX=0 INIT_MEM=0"
	#- name: cyclonev test
	# run: make -C ../iob_soc_o* fpga-test BOARD=CYCLONEV-GT-DK
	# No init mem and Ext mem
	- name: clean
	run: nix-shell --run "make clean"
	- name: setup ext_mem
	run: nix-shell --run "make setup RUN_LINUX=0 INIT_MEM=0 USE_EXTMEM=1"
	- name: cyclonev test
	run: make -C ../iob_soc_o* fpga-test BOARD=CYCLONEV-GT-DK

	aes-ku040-baremetal:
	runs-on: self-hosted
	timeout-minutes: 90
	if: ${{ !cancelled() }}
	needs: [ verilator-baremetal ]

	steps:
	- uses: actions/checkout@v3
	with:
	submodules: 'recursive'
	# IOb-SoC-Opencryptolinux only supports USE_EXTMEM=1
	## Init mem
	#- name: clean
	# run: nix-shell --run "make clean"
	#- name: setup init_mem
	# run: nix-shell --run "make setup RUN_LINUX=0"
	#- name: ku040 test
	# run: make -C ../iob_soc_o* fpga-test BOARD=AES-KU040-DB-G
	## No init mem
	#- name: clean
	# run: nix-shell --run "make clean"
	#- name: setup
	# run: nix-shell --run "make setup RUN_LINUX=0 INIT_MEM=0"
	#- name: ku040 test
	# run: make -C ../iob_soc_o* fpga-test BOARD=AES-KU040-DB-G
	# No init mem and Ext mem
	- name: clean
	run: nix-shell --run "make clean"
	- name: setup ext_mem
	run: nix-shell --run "make setup RUN_LINUX=0 INIT_MEM=0 USE_EXTMEM=1"
	- name: ku040 test
	run: make -C ../iob_soc_o* fpga-test BOARD=AES-KU040-DB-G

	cyclonev-linux:
	runs-on: self-hosted
	timeout-minutes: 60
	if: ${{ !cancelled() }}
	needs: [ verilator-linux ]

	steps:
	- uses: actions/checkout@v3
	with:
	submodules: 'recursive'
	# IOb-SoC-Opencryptolinux only supports USE_EXTMEM=1
	## Init mem
	#- name: clean
	# run: nix-shell --run "make clean"
	#- name: setup init_mem
	# run: nix-shell --run "make setup"
	#- name: cyclonev test
	# run: make -C ../iob_soc_o* fpga-test BOARD=CYCLONEV-GT-DK
	## No init mem
	#- name: clean
	# run: nix-shell --run "make clean"
	#- name: setup
	# run: nix-shell --run "make setup INIT_MEM=0"
	#- name: cyclonev test
	# run: make -C ../iob_soc_o* fpga-test BOARD=CYCLONEV-GT-DK
	# No init mem and Ext mem
	- name: clean
	run: nix-shell --run "make clean"
	- name: setup ext_mem
	run: nix-shell --run "make setup INIT_MEM=0 USE_EXTMEM=1"
	- name: cyclonev test
	run: make -C ../iob_soc_o* fpga-test BOARD=CYCLONEV-GT-DK

	aes-ku040-linux:
	runs-on: self-hosted
	timeout-minutes: 90
	if: ${{ !cancelled() }}
	needs: [ verilator-linux ]

	steps:
	- uses: actions/checkout@v3
	with:
	submodules: 'recursive'
	# IOb-SoC-Opencryptolinux only supports USE_EXTMEM=1
	## Init mem
	#- name: clean
	# run: nix-shell --run "make clean"
	#- name: setup init_mem
	# run: nix-shell --run "make setup"
	#- name: ku040 test
	# run: make -C ../iob_soc_o* fpga-test BOARD=AES-KU040-DB-G
	## No init mem
	#- name: clean
	# run: nix-shell --run "make clean"
	#- name: setup
	# run: nix-shell --run "make setup INIT_MEM=0"
	#- name: ku040 test
	# run: make -C ../iob_soc_o* fpga-test BOARD=AES-KU040-DB-G
	# No init mem and Ext mem
	- name: clean
	run: nix-shell --run "make clean"
	- name: setup ext_mem
	run: nix-shell --run "make setup INIT_MEM=0 USE_EXTMEM=1"
	- name: ku040 test
	run: make -C ../iob_soc_o* fpga-test BOARD=AES-KU040-DB-G

	doc:
	runs-on: self-hosted
	timeout-minutes: 60
	if: ${{ !cancelled() }}
	needs: [ cyclonev-baremetal, aes-ku040-baremetal, cyclonev-linux, aes-ku040-linux ]

	steps:
	- uses: actions/checkout@v3
	with:
	submodules: 'recursive'
	- name: clean
	run: nix-shell --run "make clean"
	- name: setup
	run: nix-shell --run "make setup"
	- name: doc test
	run: nix-shell --run "make -C ../iob_soc_o* doc-test"

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Merge pull request #55 from PedroAntunes178/master #108

Workflow file

Merge pull request #55 from PedroAntunes178/master #108

Jobs

Run details

Workflow file for this run