chore: deprecate the pubsub api

Fixes ipfs#9717

README.md

@@ -12,7 +12,7 @@ Kubo was the first IPFS implementation and is the most widely used one today. Im
 Featureset
 - Runs an IPFS-Node as a network service
 - [Command Line Interface](https://docs.ipfs.tech/reference/kubo/cli/) to IPFS-Nodes
-- Local [Web2-to-Web3 HTTP Gateway functionality](https://github.com/ipfs/specs/tree/main/http-gateways#readme) 
+- Local [Web2-to-Web3 HTTP Gateway functionality](https://github.com/ipfs/specs/tree/main/http-gateways#readme)
 - HTTP RPC API (`/api/v0`) to access and control the daemon
 - IPFS's internal Webgui can be used to manage the Kubo nodes
 
@@ -381,7 +381,6 @@ Some places to get you started on the codebase:
 - libp2p
   - libp2p: https://github.com/libp2p/go-libp2p
   - DHT: https://github.com/libp2p/go-libp2p-kad-dht
-  - PubSub: https://github.com/libp2p/go-libp2p-pubsub
 - [IPFS : The `Add` command demystified](https://github.com/ipfs/kubo/tree/master/docs/add-code-flow.md)
 
 ### Map of Implemented Subsystems

cmd/ipfs/daemon.go

@@ -171,7 +171,7 @@ Headers.
 		cmds.BoolOption(enableGCKwd, "Enable automatic periodic repo garbage collection"),
 		cmds.BoolOption(adjustFDLimitKwd, "Check and raise file descriptor limits if needed").WithDefault(true),
 		cmds.BoolOption(migrateKwd, "If true, assume yes at the migrate prompt. If false, assume no."),
-		cmds.BoolOption(enablePubSubKwd, "Enable experimental pubsub feature. Overrides Pubsub.Enabled config."),
+		cmds.BoolOption(enablePubSubKwd, "DEPRECATED"),
 		cmds.BoolOption(enableIPNSPubSubKwd, "Enable IPNS over pubsub. Implicitly enables pubsub, overrides Ipns.UsePubsub config."),
 		cmds.BoolOption(enableMultiplexKwd, "DEPRECATED"),
 		cmds.StringOption(agentVersionSuffix, "Optional suffix to the AgentVersion presented by `ipfs id` and also advertised through BitSwap."),

core/commands/pubsub.go

@@ -16,14 +16,14 @@ import (
 )
 
 var PubsubCmd = &cmds.Command{
-	Status: cmds.Experimental,
+	Status: cmds.Deprecated,
 	Helptext: cmds.HelpText{
 		Tagline: "An experimental publish-subscribe system on ipfs.",
 		ShortDescription: `
 ipfs pubsub allows you to publish messages to a given topic, and also to
 subscribe to new messages on a given topic.
 
-EXPERIMENTAL FEATURE
+DEPRECATED FEATURE (see https://github.com/ipfs/kubo/issues/9717)
 
   It is not intended in its current state to be used in a production
   environment.  To use, the daemon must be run with
@@ -46,13 +46,13 @@ type pubsubMessage struct {
 }
 
 var PubsubSubCmd = &cmds.Command{
-	Status: cmds.Experimental,
+	Status: cmds.Deprecated,
 	Helptext: cmds.HelpText{
 		Tagline: "Subscribe to messages on a given topic.",
 		ShortDescription: `
 ipfs pubsub sub subscribes to messages on a given topic.
 
-EXPERIMENTAL FEATURE
+DEPRECATED FEATURE (see https://github.com/ipfs/kubo/issues/9717)
 
   It is not intended in its current state to be used in a production
   environment.  To use, the daemon must be run with
@@ -145,14 +145,14 @@ TOPIC AND DATA ENCODING
 }
 
 var PubsubPubCmd = &cmds.Command{
-	Status: cmds.Experimental,
+	Status: cmds.Deprecated,
 	Helptext: cmds.HelpText{
 		Tagline: "Publish data to a given pubsub topic.",
 		ShortDescription: `
 ipfs pubsub pub publishes a message to a specified topic.
 It reads binary data from stdin or a file.
 
-EXPERIMENTAL FEATURE
+DEPRECATED FEATURE (see https://github.com/ipfs/kubo/issues/9717)
 
   It is not intended in its current state to be used in a production
   environment.  To use, the daemon must be run with
@@ -201,13 +201,13 @@ HTTP RPC ENCODING
 }
 
 var PubsubLsCmd = &cmds.Command{
-	Status: cmds.Experimental,
+	Status: cmds.Deprecated,
 	Helptext: cmds.HelpText{
 		Tagline: "List subscribed topics by name.",
 		ShortDescription: `
 ipfs pubsub ls lists out the names of topics you are currently subscribed to.
 
-EXPERIMENTAL FEATURE
+DEPRECATED FEATURE (see https://github.com/ipfs/kubo/issues/9717)
 
   It is not intended in its current state to be used in a production
   environment.  To use, the daemon must be run with
@@ -273,15 +273,15 @@ func safeTextListEncoder(req *cmds.Request, w io.Writer, list *stringList) error
 }
 
 var PubsubPeersCmd = &cmds.Command{
-	Status: cmds.Experimental,
+	Status: cmds.Deprecated,
 	Helptext: cmds.HelpText{
 		Tagline: "List peers we are currently pubsubbing with.",
 		ShortDescription: `
 ipfs pubsub peers with no arguments lists out the pubsub peers you are
 currently connected to. If given a topic, it will list connected peers who are
 subscribed to the named topic.
 
-EXPERIMENTAL FEATURE
+DEPRECATED FEATURE (see https://github.com/ipfs/kubo/issues/9717)
 
   It is not intended in its current state to be used in a production
   environment.  To use, the daemon must be run with

docs/changelogs/v0.19.md

@@ -8,6 +8,7 @@
 - [🔦 Highlights](#-highlights)
   - [Improving the libp2p resource management integration](#improving-the-libp2p-resource-management-integration)
   - [Addition of "autoclient" router type](#addition-of-autoclient-router-type)
+  - [Deprecation of the `ipfs pubsub` commands and matching HTTP endpoints](#deprecation-of-the-ipfs-pubsub-commands-and-matching-http-endpoints)
 - [📝 Changelog](#-changelog)
 - [👨‍👩‍👧‍👦 Contributors](#-contributors)
 
@@ -28,6 +29,12 @@ A new routing type "autoclient" has been added. This mode is similar to "auto",
 
 See the [Routing.Type documentation](https://github.com/ipfs/kubo/blob/master/docs/config.md#routingtype) for more information.
 
+#### Deprecation of the `ipfs pubsub` commands and matching HTTP endpoints
+
+We are deprecating `ipfs pubsub` and all `/api/v0/pubsub/` RPC endpoints and will remove them in the next release.
+
+For more information and rational see [#9717](https://github.com/ipfs/kubo/issues/9717).
+
 ### 📝 Changelog
 
 ### 👨‍👩‍👧‍👦 Contributors

docs/config.md

@@ -1165,13 +1165,15 @@ Type: `duration`
 
 ## `Pubsub`
 
+**DEPRECATED**: See [#9717](https://github.com/ipfs/kubo/issues/9717)
+
 Pubsub configures the `ipfs pubsub` subsystem. To use, it must be enabled by
 passing the `--enable-pubsub-experiment` flag to the daemon
 or via the `Pubsub.Enabled` flag below.
 
 ### `Pubsub.Enabled`
 
-**EXPERIMENTAL:** read about current limitations at [experimental-features.md#ipfs-pubsub](./experimental-features.md#ipfs-pubsub).
+**DEPRECATED**: See [#9717](https://github.com/ipfs/kubo/issues/9717)
 
 Enables the pubsub system.
 
@@ -1181,6 +1183,8 @@ Type: `flag`
 
 ### `Pubsub.Router`
 
+**DEPRECATED**: See [#9717](https://github.com/ipfs/kubo/issues/9717)
+
 Sets the default router used by pubsub to route messages to peers. This can be one of:
 
 * `"floodsub"` - floodsub is a basic router that simply _floods_ messages to all
@@ -1196,6 +1200,8 @@ Type: `string` (one of `"floodsub"`, `"gossipsub"`, or `""` (apply default))
 
 ### `Pubsub.DisableSigning`
 
+**DEPRECATED**: See [#9717](https://github.com/ipfs/kubo/issues/9717)
+
 Disables message signing and signature verification. Enable this option if
 you're operating in a completely trusted network.
 
@@ -1209,6 +1215,8 @@ Type: `bool`
 
 ### `Pubsub.SeenMessagesTTL`
 
+**DEPRECATED**: See [#9717](https://github.com/ipfs/kubo/issues/9717)
+
 Controls the time window within which duplicate messages, identified by Message
 ID, will be identified and won't be emitted again.
 
@@ -1228,6 +1236,8 @@ Type: `optionalDuration`
 
 ### `Pubsub.SeenMessagesStrategy`
 
+**DEPRECATED**: See [#9717](https://github.com/ipfs/kubo/issues/9717)
+
 Determines how the time-to-live (TTL) countdown for deduplicating Pubsub
 messages is calculated.
 

docs/experimental-features.md

@@ -12,7 +12,6 @@ When you add a new experimental feature to kubo or change an experimental
 feature, you MUST please make a PR updating this document, and link the PR in
 the above issue.
 
-- [ipfs pubsub](#ipfs-pubsub)
 - [Raw leaves for unixfs files](#raw-leaves-for-unixfs-files)
 - [ipfs filestore](#ipfs-filestore)
 - [ipfs urlstore](#ipfs-urlstore)
@@ -31,36 +30,6 @@ the above issue.
 
 ---
 
-## ipfs pubsub
-
-### State
-
-Candidate, disabled by default but will be enabled by default in 0.6.0.
-
-### In Version
-
-0.4.5 (`--enable-pubsub-experiment`)
-0.11.0 (`Pubsub.Enabled` flag in config)
-
-### How to enable
-
-Run your daemon with the `--enable-pubsub-experiment` flag
-or modify your ipfs config and restart the daemon:
-```
-ipfs config --json Pubsub.Enabled true
-```
-
-Then use the `ipfs pubsub` commands.
-
-NOTE: `--enable-pubsub-experiment` CLI flag overrides `Pubsub.Enabled` config.
-
-Configuration documentation can be found in [kubo/docs/config.md](./config.md#pubsub)
-
-### Road to being a real feature
-
-- [ ] Needs to not impact peers who don't use pubsub:
-      https://github.com/libp2p/go-libp2p-pubsub/issues/332
-
 ## Raw Leaves for unixfs files
 
 Allows files to be added with no formatting in the leaf nodes of the graph.