R4+ - Issue Solution #1

Release content status:

Release R4+ - Issue Solution #1

File Description	File Release Name	Status
DE4 HW File	L6_0_1.sof	New release in this tag
DE4 SW File	L6_0_1_0_0.elf	New release in this tag
NUC Image	NUC_12_05_LESIA	New release in this tag
SimuPUS	SimuPUS_07_06_LESIA.zip	New release in this tag
SD Card Content	SD_05_01_LESIA	Republished in this tag (no changes from its last release)
TC/TM Database	TC-TM-Payload_SimuCamPUS_V_0.7.6.zip	New release in this tag
Defaults and Enums Definitions	Defaults_Enums_Definitions_V_0.3.2.xlsx	New release in this tag
SimuCam Error Injection Definition	SimuCam_Error_Injection_Guide_for_N_FEE_Simulation_V210.pdf	New release in this tag

Important Notes:
1- Three JIRAs were solved, tested in a specific test scenario, but not tested in a System Validation Procedure, due to the reasons discussed during a meeting occurred in 26/03 (JIRAs 431, 435 and 436). Due to the characteristics of these changes, IMT is confident that we are not going to have any collateral issues. These changes are going to be tested after April, 05th.
2- The NUC Image Installation User Interface changed - Is mandatory to create a new bootable pen-drive with the released package - After that, the procedure to update the NUC Image will be the same
3- Please, be aware that in this update a new TC/TM database, Default and Enum Definitions and SimuCam Error Injection Definition documents were updated.

JIRA Issues solved in L6.0.1.0.0 release:

ID JIRA	Issue Description	Observations
PLGSC-259	N-FEE - Dynamic LUT restrictions (NUC Implementation)	-
PLGSC-405	TCP server crashes (no particular command sent before the crash)	-
PLGSC-426	Change request : Command to reset simulation cycle	-
PLGSC-430	Change request : Changing scenario without switching to config mode	-
PLGSC-434	Adding and using fullImages with 50 lines of overscan break the WINDOWING PATTERN acquisition	-
PLGSC-431	NFEE_SERIAL_TRAP_PUMPING_2 is handled as NFEE_SERIAL_TRAP_PUMPING_1	Solution not tested in a system test. To be tested in April, 5th.
PLGSC-435	The parameter of TC_SCAM_RMAP_ERR_TRIG to set the error repeat counter has been removed	Solution not tested in a system test. To be tested in April, 5th.
PLGSC-436	Can't generate the RMAP error: missing responses	Solution not tested in a system test. To be tested in April, 5th.

ClickUp Issues solved in L6.0.1.0.0 release:

ID Clickup	Issue Description	Observations
#3f1wnx	Internal Issue: Event Info with type out of the range expected	Event was being sent with the wrong MEBFEE (MEBFEE: 0
#3q2m3n	Internal Issue: Hardware Modification - Sync tester in HW	Now is possible to test the Sync System

R4+

Release content status:

Release R4+

File Description	File Release Name	Status
DE4 HW File	L6_0_0.sof	Republished in this tag (no changes from its last release)
DE4 SW File	L6_0_0_1.elf	New release in this tag
NUC Image	NUC_12_04_LESIA	New release in this tag
SimuPUS	SimuPUS_07_05_LESIA.zip	Republished in this tag (no changes from its last release)
SD Card Content	SD_05_01_LESIA	Republished in this tag (no changes from its last release)
TC/TM Database	TC-TM-Payload_SimuCamPUS_V_0.7.5.zip	New release in this tag
Defaults and Enums Definitions	Defaults_Enums_Definitions_V_0.3.1.xlsx	Republished in this tag (no changes from its last release)
SimuCam Error Injection Definition (rev. 2)	SimuCam_Error_Injection_Guide_for_N_FEE_Simulation_V200.pdf	New release in this tag

Requirements implemented in L6.0.0.1 release:

ID Requirement	Requirement Description	Req. Fully Implemented?	Observations
NA	NA	NA	NA

JIRA Issues solved in L6.0.0.1 release:

ID JIRA	Issue Description	Observations
PLGSC-396	No mode transition to windowing mode when IMGWIN_CONTENT_ERR is active	-
PLGSC-405	TCP server crashes (no particular command sent before the crash)	-
PLGSC-411	TC/TM ICD 0.7.4: CCDside enum of TC_SCAM01_IMGWIN_CONTENT_ERR_CONFIG seems to be wrong	-

ClickUp Issues solved in L6.0.0.1 release:

ID Clickup	Issue Description	Observations
NA	NA	NA

R4 - Issue Solution #8

Release content status:

*Release R4-IS#*8

File Description	File Release Name	Status
DE4 HW File	L6_0_0.sof	New release in this tag
DE4 SW File	L6_0_0_0.elf	New release in this tag
NUC Image	NUC_12_03_LESIA	New release in this tag
SimuPUS	SimuPUS_07_05_LESIA.zip	Republished in this tag (no changes from its last release)
SD Card Content	SD_05_01_LESIA	Republished in this tag (no changes from its last release)
TC/TM Database	TC-TM-Payload_SimuCamPUS_V_0.7.4.zip	Republished in this tag (no changes from its last release)
Defaults and Enums Definitions	Defaults_Enums_Definitions_V_0.3.1.xlsx	Republished in this tag (no changes from its last release)

Requirements implemented in L6.0.0.0 release:

ID Requirement	Requirement Description	Req. Fully Implemented?	Observations
NA	NA	NA	NA

JIRA Issues solved in L6.0.0.0 release:

ID JIRA	Issue Description	Observations
PLGSC-374	Overscan line number extended to 300	-
PLGSC-252	The TC to change the synchronization source (INTERNAL or EXTERNAL) doesn't work	-
PLGSC-387	Change request : HK hypersampling	-
PLGSC-390	Change request : clear_error_flag register change	-
PLGSC-384	SimuCam #1: Lost TCP server during SimuCam configuration in MFT	-
PLGSC-386	Change request : Charge injection	-
PLGSC-388	Change request : Parallel trap pumping	-
PLGSC-389	Change request : Serial trap pumping	-
PLGSC-395	2 parameters are missing for TM_xxx_TC_EXEC_FAILURE_NOTEXE	-
PLGSC-369	Trap pumping mode: HK is missing during acquisition	-
PLGSC-367	TMxxx_TC_EXEC_FAILURE received with not enough data compared to the ICD definition	-

ClickUp Issues solved in L6.0.0.0 release:

ID Clickup	Issue Description	Observations
#2k3vp3	Internal Issue: Review pre-sync robustness (SimuCam should not brick if a RMAP command is received during this period)	-

R4-IS#7

Release content status:

*Release R4-IS#*7

File Description	File Release Name	Status
DE4 HW File	L5_0_6.sof	Republished in this tag (no changes from its last release)
DE4 SW File	L5_0_6_0_0.elf	Republished in this tag (no changes from its last release)
NUC Image	NUC_12_02_LESIA	New release in this tag
SimuPUS	SimuPUS_07_05_LESIA.zip	New release in this tag
SD Card Content	SD_05_01_LESIA	Republished in this tag (no changes from its last release)
TC/TM Database	TC-TM-Payload_SimuCamPUS_V_0.7.4.zip	New release in this tag
Defaults and Enums Definitions	Defaults_Enums_Definitions_V_0.3.1.xlsx	Republished in this tag (no changes from its last release)

Requirements implemented in L5.0.6.0_NUC12.02. release:

ID Requirement	Requirement Description	Req. Fully Implemented?	Observations
NA	NA	NA	NA

JIRA Issues solved in L5.0.6.0_NUC12.02 release:

ID JIRA	Issue Description	Observations
PLGSC-259	N-FEE - Dynamic LUT restrictions (NUC Implementation)	-
PLGSC-376	Windowing SimuCam #5 with NDPU: long test failed	-
PLGSC-377	Lost and can't connect to the SimuCam #5 TCP server	-

ClickUp Issues solved in L5.0.6.0_NUC12.02 release:

ID Clickup	Issue Description	Observations
#2k3vpf	Internal Issue: Include a PUS command to turn off the "Worst Case Default" from NUC.	-

R4-IS#6

Release content status:

Release R4-IS#6

File Description	File Release Name	Status
DE4 HW File	L5_0_6.sof	New release in this tag
DE4 SW File	L5_0_6_0_0.elf	New release in this tag
NUC Image	NUC_12_01_LESIA	New release in this tag
SimuPUS	SimuPUS_07_04_LESIA.zip	New release in this tag
SD Card Content	SD_05_01_LESIA	New release in this tag
TC/TM Database	TC-TM-Payload_SimuCamPUS_V_0.7.3.zip	New release in this tag
Defaults and Enums Definitions	Defaults_Enums_Definitions_V_0.3.1.xlsx	New release in this tag

Requirements implemented in L5.0.6.0. release:

ID Requirement	Requirement Description	Req. Fully Implemented?	Observations
NFEESIM-UR-470	Event reporting	Y	Identifier to enable and disable Event was implemented (TC_xxx_EVT_DEFAULT / TC_xxx_EVT_UPDATE)
NFEESIM-UR-469	Event reporting	Y	Identifier to enable and disable Event was implemented (TC_xxx_EVT_DEFAULT / TC_xxx_EVT_UPDATE)

JIRA Issues solved in L5.0.6.0.0 release:

ID JIRA	Issue Description	Observations
PLGSC-358	SimuCam #1 and #5 Port E unstable	New FPGA HW synthesis solved the issue as a short term solution.
PLGSC-364	Windowing simple and worst case on simucam #5 Ports C&D: we receive worst case in any case	Issue solved during Debug Session
PLGSC-367	TMxxx_TC_EXEC_FAILURE received with not enough data compared to the ICD definition	-
PLGSC-375	Windowing SimuCam #1 with NDPU: a simple case failed every 30 tests	Mandatory to update NUC Image in the SimuCam#1 by USB drive
PLGSC-348	TM_SCAMxx_EVT_ERR and TM_SCAMxx_EVT_INF received with wrong APID	PCAT Information added into the SD Card (SD_05_01)
PLGSC-366	RMAP injection error not working on SimuCam #5 and #1	-

ClickUp Issues solved in L5.0.6.0.0 release:

ID Clickup	Issue Description	Observations
NA	NA	NA

R4-IS#5

Release content status:

Release R4-IS#5

File Description	File Release Name	Status
DE4 HW File	L5_0_5.sof	Republished in this tag (no changes from its last release)
DE4 SW File	L5_0_5_0_0.elf	Republished in this tag (no changes from its last release)
NUC Image	NUC_12_00_LESIA	New release in this tag
SimuPUS	SimuPUS_07_03_LESIA.zip	Republished in this tag (no changes from its last release)
SD Card Content	SD_05_00_LESIA	Republished in this tag (no changes from its last release)
TC/TM Database	TC-TM-Payload_SimuCamPUS_V_0.7.2.zip	New release in this tag
Defaults and Enums Definitions	Defaults_Enums_Definitions_V_0.3.0.xlsx	Republished in this tag (no changes from its last release)

Requirements implemented in L5.0.5.0.0_NUC12.00 release:

ID Requirement	Requirement Description	Req. Fully Implemented?	Observations
NA	NA	NA	NA

JIRA Issues solved in L5.0.5.0.0_NUC12.00 release:

ID JIRA	Issue Description	Observations
PLGSC-264	Check and execute the reference windowing test case #2 (with LUT loaded via RMAP)	-
PLGSC-353	SimuCam #1 lost during windowing pattern acquisition (worst case)	-
PLGSC-345	Simucam #1 and #5 refuses to send TM	-
PLGSC-346	SD card : the file path is not the same as before	-
PLGSC-352	SPW connection lost during transition to fullImagePattern acquisition	-
PLGSC-355	Can't reproduce the worst case windowing acquisition with the correct number of data packets expected	-
PLGSC-373	Windowing SimuCam #1 with NDPU: the windowing mode is unstable	-
PLGSC-340	SimuCam #5: we receive TM error every 2s (not parsed)	-
PLGSC-347	TM error received while sending TC_SCAM_RUN	-
PLGSC-365	SimuCam TC/TM ICD 0.7.1 of IMT: 2 parameters of TM_SCAMxx_EVT_INF are not implemented as in the ICD

ClickUp Issues solved in L5.0.5.0.0_NUC12.00 release:

ID Clickup	Issue Description	Observations
#2d5498	Internal Issue: After a TC_SCAMxx_RESET, USB3.0 communication is not functional	-

R4-IS#4

Release content status:

Release R4-IS#4

File Description	File Release Name	Status
DE4 HW File	L5_0_5.sof	New release in this tag
DE4 SW File	L5_0_5_0_0.elf	New release in this tag
NUC Image	NUC_11_06_LESIA	New release in this tag
SimuPUS	SimuPUS_07_03_LESIA.zip	Republished in this tag (no changes from its last release)
SD Card Content	SD_05_00_LESIA	Republished in this tag (no changes from its last release)
TC/TM Database	TC-TM-Payload_SimuCamPUS_V_0.7.1.zip	Republished in this tag (no changes from its last release)
Defaults and Enums Definitions	Defaults_Enums_Definitions_V_0.3.0.xlsx	New release in this tag

Requirements implemented in L5.0.5.0.0 release:

ID Requirement	Requirement Description	Req. Fully Implemented?	Observations
NA	NA	NA	NA

JIRA Issues solved in L5.0.5.0.0 release:

ID JIRA	Issue Description	Observations
PLGSC-345	Simucam #1 and #5 refuses to send TM	-
PLGSC-356	FullImage pattern mode: Missing packets with Vend=4559	-
PLGSC-343	Windowing simple case: On the last frame we only received overscan data for the right side	-

ClickUp Issues solved in L5.0.5.0.0 release:

ID Clickup	Issue Description	Observations
NA	NA	NA

R4 - Issue Solution #3

Release content status:

Release R4-IS#3

File Description	File Release Name	Status
DE4 HW File	L5_0_4.sof	New release in this tag
DE4 SW File	L5_0_4_0_0.elf	New release in this tag
NUC Image	NUC_11_05_LESIA	New release in this tag
SimuPUS	SimuPUS_07_03_LESIA.zip	New release in this tag
SD Card Content	SD_05_00_LESIA	Republished in this tag (no changes from its last release)
TC/TM Database	TC-TM-Payload_SimuCamPUS_V_0.7.1.zip	New release in this tag
Defaults Definitions	Defaults_Definitions_V_0.2.0.xlsx	Republished in this tag (no changes from its last release)

Requirements implemented in L5.0.4.0.0 release:

ID Requirement	Requirement Description	Req. Fully Implemented?	Observations
NFEESIM-UR-418	SpaceWire errors	Y	Errors at exchange level (parity, disconnect, escape sequence, character sequence, credit) and Errors at network level: (invalid destination address) implemented in this release

JIRA Issues solved in L5.0.4.0.0 release:

ID JIRA	Issue Description	Observations
PLGSC-337	TM_TEST_CONNECTION wrong PID	-
PLGSC-336	The display of SD configuration in the nios2-terminal is not the same as in the SD file ETH	-
PLGSC-341	APID (PID+CAT) not correct for TM packets	-
PLGSC-307	ICD 0.4.1 : CCD_NUMBER minimum value should be 0	-

ClickUp Issues solved in L5.0.4.0.0 release:

ID Clickup	Issue Description	Observations
#1h68g9	Internal Issue: Add FTDI automatic config during SimuCam Startup	-
#2b2182	Feature Request: Add PCAT edit possibility in SimuPUS	-

R4 - Issue Solution #2

Release content status:

Release R4-IS#2

File Description	File Release Name	Status
DE4 HW File	L5_0_3.sof	New release in this tag
DE4 SW File	L5_0_3_0_0.elf	New release in this tag
NUC Image	NUC_11_04_LESIA	New release in this tag
SimuPUS	SimuPUS_07_02_LESIA.zip	Republished in this tag (no changes from its last release)
SD Card Content	SD_05_00_LESIA	New release in this tag
TC/TM Database	TC-TM-Payload_SimuCamPUS_V_0.7.0.zip	Republished in this tag (no changes from its last release)
Defaults Definitions	Defaults_Definitions_V_0.2.0.xlsx	Republished in this tag (no changes from its last release)
SD Card Move to NUC Info	Instructions to SimuCam Upgrade_SD Card move to NUC_V1.pdf	New release in this tag

Requirements implemented in L5.0.3.0.0 release:

ID Requirement	Requirement Description	Req. Fully Implemented?	Observations
NA	NA	NA	NA

JIRA Issues solved in L5.0.3.0.0 release:

ID JIRA	Issue Description	Observations
PLGSC-319	Endianness issue with TC_SCAM01_IMGWIN_CONTENT_ERR_CONFIG	-
PLGSC-323	RMAP echoing mode: option with header doesn't work	Retested - No issue found
PLGSC-320	Effects of the TC_SCAMxx_TICO_ERR_TRIG injection	-
PLGSC-300	SimuCam 5 crash after sending TC_SCAM01_IMAGE_MISSDATA_TRIG	Retested - No issue found
PLGSC-308	No warning or error message while sending a TC_SCAM_FULL_SSD_IMG_LIST_UPDATE with wrong value for CCD_NUMBER parameter	-

ClickUp Issues solved in L5.0.3.0.0 release:

ID Clickup	Issue Description	Observations
#251ehd	Internal Issue: SD Card (Parameters Review+ Move it into NUC)	PID info added as a parameter in the SD Card

Known Issues solved in L5.0.3.0.0 release:

ID Known Issue	Issue Description	Observations
NFEESIM-UR-480: Window Transmission errors	R3+ Issue - Not Implemented yet	Issue Solved

R4 - Issue Solution #1

Release content status:

Release R4-IS#1

File Description	File Release Name	Status
DE4 HW File	L5_0_2.sof	New release in this tag
DE4 SW File	L5_0_2_0_0.elf	New release in this tag
NUC Image	NUC_11_03_LESIA	New release in this tag
SimuPUS	SimuPUS_07_02_LESIA.zip	New release in this tag
SD Card Content	SD_04_00_LESIA	Republished in this tag (no changes from its last release)
TC/TM Database	TC-TM-Payload_SimuCamPUS_V_0.7.0.zip	New release in this tag
Defaults Definitions	Defaults_Definitions_V_0.2.0.xlsx	New release in this tag

Requirements implemented in L5.0.2.0.0 release:

ID Requirement	Requirement Description	Req. Fully Implemented?	Observations
NFEESIM-UR-693	Time management	Y	-
NFEESIM-UR-1116	Packet order list management	Y	-
NFEESIM-UR-1138	Packet order list management	Y	-

JIRA Issues solved in L5.0.2.0.0 release:

ID JIRA	Issue Description	Observations
PLGSC-322	Insert HK in channel G	-
PLGSC-310	TM_SCAM_RMAP_CONF_DUMP not parsed on MA (wrong PID)	-
PLGSC-318	Can't go in FullImage mode fed by SSD after the adding of TC_SCAM_FEE_DATA_SOURCE	-
PLGSC-315	Data input for FEE doesn't work for all FEE	-
PLGSC-328	SimuCam #5 Port C and D are unstable in L5.0.1.0.0 (R4)	-
PLGSC-280	SimuCam TC/TM ICD 0.4.0 of IMT: TM_SCAM_MEB_STATUS enum parameters in TBD	-
PLGSC-281	SimuCam TC/TM ICD 0.4.0 of IMT: TM_SCAM_FEE_STATUS enum parameters in TBD	-

ClickUp Issues solved in L5.0.2.0.0 release:

ID Clickup	Issue Description	Observations
#272r3h	Internal Issue: PID default change not implemented	This issue was solved, as is possible to change the default PID by TC_SCAMxx_DEFAULT (ID 10003), but in the next release the PID information will be accessible in the SD card.