Releases: NSEE/SimuCam_Development_NFEE
Releases · NSEE/SimuCam_Development_NFEE
R4 - LESIA
Release content status:
Release R4
| File Description | File Release Name | Status |
|---|---|---|
| DE4 HW File | L5_0_1.sof | New release in this tag |
| DE4 SW File | L5_0_1_0_0.elf | New release in this tag |
| NUC Image | NUC_11_02_LESIA | New release in this tag |
| SimuPUS | SimuPUS_07_01_LESIA.zip | New release in this tag |
| SD Card Content | SD_04_00_LESIA | Republished in this tag (no changes from its last release) |
| TC/TM Database | TC-TM-Payload_SimuCamPUS_V_0.6.0.zip | New release in this tag |
| Defaults Definitions | Defaults_Definitions_V_0.1.0.xlsx | New release in this tag |
Requirements implemented in L5.0.1.0.0 release:
| ID Requirement | Requirement Description | Req. Fully Implemented? | Observations |
|---|---|---|---|
| NFEESIM-UR-1066 | Synchronization signal | Y | - |
| NFEESIM-UR-1067 | Synchronization signal | Y | - |
| NFEESIM-UR-1125 | Synchronization signal | Y | - |
| NFEESIM-UR-1126 | Synchronization signal | Y | - |
| NFEESIM-UR-1136 | Packet order list management | Y | Delivered as described in JIRA PLGSC-322 |
| NFEESIM-UR-1103 | Packet order list management | - | |
| NFEESIM-UR-1109 | Packet order list management | - | |
| NFEESIM-UR-467 | Event reporting | Y | - |
| NFEESIM-UR-468 | Event reporting | Y | - |
| NFEESIM-UR-724 | Event reporting | Y | - |
| NFEESIM-UR-475 | SpaceWire / RMAP interface configuration | Y | - |
| NFEESIM-UR-476 | SpaceWire / RMAP interface configuration | Y | - |
| NFEESIM-UR-477 | SpaceWire / RMAP interface configuration | Y | - |
| NFEESIM-UR-478 | SpaceWire / RMAP interface configuration | Y | - |
| NFEESIM-UR-726 | Log reporting | Y | - |
| NFEESIM-UR-727 | Log reporting | Y | - |
| NFEESIM-UR-496 | Non-volatile memory | Y | - |
| NFEESIM-UR-568 | SimuCam MEB reset and startup | Y | - |
| NFEESIM-UR-569 | Window list management | Y | Delivered as described in JIRA PLGSC-322 |
| NFEESIM-UR-634 | Synchronization signal | Y | - |
| NFEESIM-UR-635 | Synchronization signal | Y | - |
| NFEESIM-UR-647 | N-FEE housekeeping simulation | Y | - |
| NFEESIM-UR-648 | N-FEE housekeeping simulation | Y | - |
| NFEESIM-UR-675 | N-FEE windowing mode management | Y | Delivered as described in JIRA PLGSC-321 |
| NFEESIM-UR-591 | Time management | Y | - |
| NFEESIM-UR-660 | Time management | Y | - |
| NFEESIM-UR-695 | Time management | Y | - |
| NFEESIM-UR-696 | Time management | Y | - |
| NFEESIM-UR-898 | N-FEE timing configuration | Y | - |
| NFEESIM-UR-899 | N-FEE timing configuration | Y | - |
| NFEESIM-UR-900 | N-FEE timing configuration | Y | - |
| NFEESIM-UR-944 | Immediate ON command simulation | Y | - |
| NFEESIM-UR-1001 | Image and window content error | Y | Known issue from R3+, solved in R4 release |
| NFEESIM-UR-990 | Image and window content error | Y | Known issue from R3+, solved in R4 release |
| NFEESIM-UR-992 | Image and window content error | Y | Known issue from R3+, solved in R4 release |
| NFEESIM-UR-420 | RMAP errors | Y | Known issue from R3+, solved in R4 release |
| NFEESIM-UR-481 | Time-code errors | Y | Known issue from R3+, solved in R4 release |
| NFEESIM-UR-997 | Image and window content error | Y | Known issue from R3+, solved in R4 release |
Known Issues in L5.0.1.0.0 release:
| ID Requirement | Requirement Description | Known Issue | Observations |
|---|---|---|---|
| NFEESIM-UR-469 | Event reporting | TCs have no payload field to configure the identifier which shall be enabled/disabled. Only global enable/disable of all identifiers is possible | Solution Due Date: 18/09 |
| NFEESIM-UR-470 | Event reporting | Change parameter using PUS/EDEN TC: TC_SCAMxx_DEFAULT_UPDATE / ID 28 is not being considered to take any action | Solution Due Date: 18/09 |
| NFEESIM-UR-601 | SSD window stack storage management | Current maximum stack size is 65535 instead of 65536 | Solution Due Date: 18/09 |
| NFEESIM-UR-693 | Time management | Not implemented yet | Solution Due Date: 18/09 |
| NFEESIM-UR-1116 | Packet order list management | Not implemented yet | Solution Due Date: 18/09 |
| NFEESIM-UR-1138 | Packet order list management | Not implemented yet | Solution Due Date: 18/09 |
| NFEESIM-UR-480 | Window Transmission errors | R3+ Issue - Not Implemented yet | Solution Due Date: 18/09 |
| NFEESIM-UR-418 | SpaceWire errors | Missing Errors at exchange level: parity, disconnect, escape sequence, character sequence, credit. and · Errors at network level: EEP received, invalid destination address. (As previously informed) | Solution Due Date: 18/09 |
JIRA Issues solved in L5.0.1.0.0 release:
| ID JIRA | Issue Description | Observations |
|---|---|---|
| PLGSC-184 | UR-1067: the TC to change the default EP doesn't exist | Req. 1067 implemented in R4 |
| PLGSC-128 | UR-477: TC_SCAM_SPW_RMAP_CONFIG_DEFAULT not implemented | Req. 477 and 476 implemented in R4 |
| PLGSC-244 | Lost and can't connect to the SimuCam 3 and 5 TCP server after a long period of use | Solved in R4 |
ClickUp Issues solved in L5.0.1.0.0 release:
| ID Clickup | Issue Description | Observations |
|---|---|---|
| #8ymc6a | Internal Issue: First sky not loading in ~12% of the attempts | Solved in R4 |
| #1n5zjt | Internal Issue: Dump/Status final solution (replacement of intermediary SW solution for these features) | Solved in R4 |
| #1v3pcu | Internal Issue: Review of solution implemented for JIRA PLGSC-309, enabling the buffer verification | TOG (Solved in R4 ) |
| #7carc7 | Internal Issue: Output buffer replication (Overscan) | TOG (Solved in R4) |
R3+
Release content status:
Release R3+
| File Description | File Release Name | Status |
|---|---|---|
| DE4 HW File | L5_0_0.sof | New release in this tag |
| DE4 SW File | L5_0_0_0_0.elf | New release in this tag |
| NUC Image | NUC_11_00_LESIA | New release in this tag |
| SimuPUS | SimuPUS_07_00_LESIA.zip | New release in this tag |
| SD Card Content | SD_04_00_LESIA | Republished in this tag (no changes from its last release) |
| TC/TM Database | TC-TM-Payload_SimuCamPUS_V_0.5.0.zip | New release in this tag |
Requirements implemented in L5.0.0.0.0 release:
| ID Requirement | Requirement Description | Req. Fully Implemented? | Observations |
|---|---|---|---|
| NFEESIM-UR-1002 | Image and window content error | Y | - |
| NFEESIM-UR-1117 | Data packet header error | Y | - |
| NFEESIM-UR-1118 | Data packet header error | Y | - |
| NFEESIM-UR-1119 | Data packet header error | Y | - |
| NFEESIM-UR-1120 | Data packet header error | Y | - |
| NFEESIM-UR-1121 | Data packet header error | Y | - |
| NFEESIM-UR-1122 | Data packet header error | Y | - |
| NFEESIM-UR-418 | SpaceWire errors | P | Implemented in this release: Errors at exchange level: disconnect / Errors at network level: EEP received |
| NFEESIM-UR-419 | Error injection management | Y | - |
| NFEESIM-UR-571 | Window transmission errors | Y | - |
| NFEESIM-UR-659 | Error injection management | Y | - |
| NFEESIM-UR-723 | Error injection management | Y | - |
| NFEESIM-UR-989 | Image and window content error | Y | - |
| NFEESIM-UR-993 | Image and window content error | Y | - |
| NFEESIM-UR-994 | Image and window content error | Y | - |
| NFEESIM-UR-996 | Image and window content error | Y | - |
| NFEESIM-UR-999 | Image and window content error | Y | - |
Known Issues in L5.0.0.0.0 release:
| ID Requirement | Requirement Description | Known Issue | Observations |
|---|---|---|---|
| NFEESIM-UR-1001 | Image and window content error | MEB rejects a new Error Injection command only in the first sync after when an error injection process is started | To be solved until 04/09 |
| NFEESIM-UR-420 | RMAP errors | RMAP_ERR_TRIG_ErrorIDs 13, 2 and 7 are not functional | To be solved until 04/09 |
| NFEESIM-UR-480 | Window transmission errors | TC_SCAMxx_WIN_ERR_MISSDATA_TRIG: Offset parameter not functional | To be solved until 04/09 |
| NFEESIM-UR-481 | Time-code errors | ERROR_ID = 1 / N_REPEAT = 0 is not correctly implemented: It activates the error injection permanently for every sync | To be solved until 04/09 |
| NFEESIM-UR-990 | Image and window content error | N : count of frames to maintain the error activated works only in FULLIMAGE mode | To be solved until 04/09 |
| NFEESIM-UR-992 | Image and window content error | Error injection fully functional in FULLIMAGE mode, but it is not functional for WINDOWING mode | To be solved until 04/09 |
JIRA Issues solved in L5.0.0.0.0 release:
| ID JIRA | Issue Description | Observations |
|---|---|---|
| NA | NA | NA |
ClickUp Issues solved in L5.0.0.0.0 release:
| ID Clickup | Issue Description | Observations |
|---|---|---|
| NA | NA | NA |
R3 - Issue Solution #2
Release content status:
Release R3 - Issue Solution #2
| File Description | File Release Name | Status |
|---|---|---|
| DE4 HW File | L4_0_2.sof | New release in this tag |
| DE4 SW File | L4_0_2_0_1.elf | New release in this tag |
| NUC Image | NUC_10_01_LESIA | Republished in this tag (no changes from its last release) |
| SD Card Content | SD_04_00_LESIA | Republished in this tag (no changes from its last release) |
| TC/TM Database | TC-TM-Payload_SimuCamPUS_V_0.4.0.zip | Republished in this tag (no changes from its last release) |
| FTDI Parameter Change Documentation | Instructions to Change FTDI Clock Speed.pdf | Republished in this tag (no changes from its last release) |
| FTDI Configuration SW | FT600ChipConfigurationProgUtility_v1.3.0.2.zip | Republished in this tag (no changes from its last release) |
Requirements implemented in L4.0.2.0.1 release:
| ID Requirement | Requirement Description | Req. Fully Implemented? | Observations |
|---|---|---|---|
| NA | NA | NA | NA |
JIRA Issues solved in L4.0.2.0.1 release:
| ID JIRA | Issue Description | Observations |
|---|---|---|
| PLGSC-297 | SimuCam 1 Port F is unstable | NA |
| PLGSC-295 | SimuCam 3 and 5 Port F are unstable | NA |
| PLGSC-294 | SimuCam 5 Port D is unstable after installing L3.1.5.0.0 | NA |
| PLGSC-304 | SimuCam 5 Port B and F are unstable after installing R3 | NA |
| PLGSC-301 | SimuCam 1 Port B is unstable after installing the R3 | NA |
| PLGSC-309 | No data packets after spacewire disconnection | NA |
| PLGSC-312 | SimuCam #1 Port A is unstable in L4.0.1.0.0 | NA |
ClickUp Issues solved in L4.0.2.0.1 release:
| ID Clickup | Issue Description | Observations |
|---|---|---|
| NA | NA | NA |
R2+ (Issue Solution #4)
Release content status:
Release R2+ - Issue Solution #4
| File Description | File Release Name | Status |
|---|---|---|
| DE4 HW File | L3_1_4.sof | Republished in this tag (no changes from its last release) |
| DE4 SW File | L3_1_4_0_1.elf | New release in this tag |
| NUC Image | NUC_09_00_LESIA | Republished in this tag (no changes from its last release) |
| SimuPUS Setup | SimuPUS_06_00_LESIA.zip | Republished in this tag (no changes from its last release) |
| SD Card Content | SD_04_00_LESIA | Republished in this tag (no changes from its last release) |
| TC/TM Database | TC-TM-Payload_SimuCamPUS_V_0.4.0.zip | Republished in this tag (no changes from its last release) |
Requirements implemented in L3.1.4.0.1 release:
| ID Requirement | Requirement Description | Req. Fully Implemented? | Observations |
|---|---|---|---|
| NA | NA | NA | NA |
JIRA Issues solved in L3.1.4.0.1 release:
| ID JIRA | Issue Description | Observations |
|---|---|---|
| PLGSC-309 | No data packets after spacewire disconnection | - |
ClickUp Issues solved in L3.1.4.0.1 release:
| ID Clickup | Issue Description | Observations |
|---|---|---|
| NA | NA | NA |
R3 (Issue Solution #1)
R3 - Issue Solution #1 - Release content status:
| File Description | File Release Name | Status |
|---|---|---|
| DE4 HW File | L4_0_1.sof | New release in this tag |
| DE4 SW File | L4_0_1_0_0.elf | New release in this tag |
| NUC Image | NUC_10_01_LESIA | New release in this tag |
| SD Card Content | SD_04_00_LESIA | New release in this tag |
| TC/TM Database | TC-TM-Payload_SimuCamPUS_V_0.4.1.zip | Republished in this tag (no changes from its last release) |
| FTDI Parameter Change Documentation | Instructions to Change FTDI Clock Speed.pdf | New release in this tag |
| FTDI Configuration SW | FT600ChipConfigurationProgUtility_v1.3.0.2.zip | New release in this tag |
Requirements implemented in L4.0.1.0.0 release:
| ID Requirement | Requirement Description | Req. Fully Implemented? | Observations |
|---|---|---|---|
| NA | NA | NA | NA |
JIRA Issues solved in L4.0.1.0.0 release:
| ID JIRA | Issue Description | Observations |
|---|---|---|
| PLGSC-297 | SimuCam 1 Port F is unstable | NA |
| PLGSC-295 | SimuCam 3 and 5 Port F are unstable | NA |
| PLGSC-294 | SimuCam 5 Port D is unstable after installing L3.1.5.0.0 | NA |
| PLGSC-304 | SimuCam 5 Port B and F are unstable after installing R3 | NA |
| PLGSC-301 | SimuCam 1 Port B is unstable after installing the R3 | NA |
ClickUp Issues solved in L4.0.1.0.0 release:
| ID Clickup | Issue Description | Observations |
|---|---|---|
| NA | NA | NA |
R3 - LESIA
Release content status:
| File Description | File Release Name | Status |
|---|---|---|
| DE4 HW File | L4_0_0.sof | New release in this tag |
| DE4 SW File | L4_0_0_0_0.elf | New release in this tag |
| NUC Image | NUC_10_00_LESIA | New release in this tag |
| SD Card Content | SD_04_00_LESIA | Republished in this tag (no changes from its last release) |
| TC/TM Database | TC-TM-Payload_SimuCamPUS_V_0.4.1.zip | New release in this tag |
Requirements implemented in L4.0.0.0.0 release:
| ID Requirement | Requirement Description | Req. Fully Implemented? | Observations |
|---|---|---|---|
| NFEESIM-UR-1101 | Packet order list management | Y | - |
| NFEESIM-UR-1105 | Packet order list management | Y | - |
| NFEESIM-UR-1106 | Packet order list management | Y | - |
| NFEESIM-UR-1107 | Packet order list management | Y | - |
| NFEESIM-UR-1110 | Packet order list management | Y | - |
| NFEESIM-UR-1112 | Packet order list management | Y | - |
| NFEESIM-UR-1113 | Packet order list management | Y | - |
| NFEESIM-UR-1115 | Packet order list management | Y | - |
| NFEESIM-UR-1135 | Packet order list management | Y | - |
| NFEESIM-UR-1137 | Packet order list management | Y | - |
| NFEESIM-UR-1164 | SimuCam MEB communication interface | Y | - |
| NFEESIM-UR-601 | SSD window stack storage management | Y | - |
| NFEESIM-UR-678 | SSD window stack storage management | Y | - |
| NFEESIM-UR-717 | SSD window stack storage management | Y | - |
| NFEESIM-UR-602 | SSD window stack storage management | Y | - |
| NFEESIM-UR-603 | SSD window stack storage management | Y | - |
| NFEESIM-UR-604 | SSD window stack storage management | Y | - |
| NFEESIM-UR-605 | SSD window stack storage management | Y | - |
| NFEESIM-UR-606 | SSD window stack storage management | Y | - |
| NFEESIM-UR-607 | SSD window stack storage management | Y | - |
| NFEESIM-UR-608 | SSD window stack storage management | Y | - |
| NFEESIM-UR-609 | SSD window stack storage management | Y | - |
| NFEESIM-UR-610 | SSD window stack storage management | Y | - |
| NFEESIM-UR-513 | N-FEE windowing mode management | Y | Info: R2: Pattern + SSD Static implementation / R2+:Pattern + SSD Dinamyc implementation / R3: SSD window Mode |
| NFEESIM-UR-574 | Window list management | Y | - |
| NFEESIM-UR-516 | N-FEE windowing mode management | Y | - |
| NFEESIM-UR-517 | N-FEE windowing mode management | Y | - |
| NFEESIM-UR-518 | N-FEE windowing mode management | Y | - |
| NFEESIM-UR-520 | N-FEE windowing mode management | Y | - |
| NFEESIM-UR-554 | N-FEE windowing mode management | Y | - |
| NFEESIM-UR-555 | N-FEE windowing mode management | Y | - |
| NFEESIM-UR-574 | N-FEE windowing mode management | Y | - |
| NFEESIM-UR-575 | N-FEE windowing mode management | Y | - |
| NFEESIM-UR-576 | N-FEE windowing mode management | Y | - |
| NFEESIM-UR-581 | N-FEE windowing / SSD window mode | Y | - |
| NFEESIM-UR-614 | N-FEE windowing / SSD window mode | Y | - |
| NFEESIM-UR-615 | N-FEE windowing / SSD window mode | Y | - |
| NFEESIM-UR-617 | N-FEE windowing / SSD window mode | Y | - |
| NFEESIM-UR-618 | N-FEE windowing / SSD window mode | Y | - |
| NFEESIM-UR-619 | N-FEE windowing / SSD window mode | Y | - |
| NFEESIM-UR-625 | N-FEE windowing / SSD window mode | Y | - |
| NFEESIM-UR-620 | N-FEE windowing / SSD window mode | Y | - |
| NFEESIM-UR-621 | N-FEE windowing / SSD window mode | Y | - |
| NFEESIM-UR-622 | N-FEE windowing / SSD window mode | Y | - |
| NFEESIM-UR-673 | N-FEE windowing mode management | Y | - |
| NFEESIM-UR-675 | N-FEE windowing mode management | Y | - |
| NFEESIM-UR-788 | N-FEE windowing mode management | Y | - |
| NFEESIM-UR-791 | N-FEE windowing mode management | Y | - |
| NFEESIM-UR-831 | N-FEE windowing mode management | Y | - |
| NFEESIM-UR-844 | N-FEE windowing mode management | Y | - |
| NFEESIM-UR-931 | N-FEE on mode simulation | Y | - |
| NFEESIM-UR-938 | N-FEE on mode simulation | Y | - |
| NFEESIM-UR-947 | N-FEE windowing mode management | Y | - |
| NFEESIM-UR-948 | N-FEE windowing mode management | Y | - |
| NFEESIM-UR-951 | N-FEE trap pumping mode management | Y | P: Parallel trap pumpin in R2+. Serial trap pumping in R3 |
| NFEESIM-UR-979 | N-FEE trap pumping mode management | Y | Parallel trap pumpin in R2+. Serial trap pumping in R3 |
| NFEESIM-UR-983 | N-FEE trap pumping mode management | Y | Parallel trap pumpin in R2+. Serial trap pumping in R3 |
JIRA Issues solved in L4.0.0.0.0 release:
| ID JIRA | Issue Description | Observations |
|---|---|---|
| PLGSC-274 | Digitise Issue (RMAP Commands Implementation Policy) | - |
| PLGSC-171 | TC_SCAM_RMAP_CONF_DUMP | - |
| PLGSC-172 | UR-699: Dump RMAP Content not testable | - |
| PLGSC-256 | New parameter to skip readout | - |
| PLGSC-275 | Last OS packet with different sizes during windowing tests | - |
| PLGSC-276 | Incorrect sequence counter for CCDs with no windows during windowing tests | - |
| PLGSC-226 | SimuCam 3 can't enter in RUNNING mode after injecting errors | Retest - no issues found |
| PLGSC-244 | Lost and can't connect to the SimuCam 3 and 5 TCP server after a long period of use | - |
| PLGSC-283 | tightVNC server lost on SimuCam 1 (in R1+) | - |
| PLGSC-220 | NUC installation R1+: SQL error message | - |
| PLGSC-185 | UR-501: The TC to configure FI mode fed by SSD images / or patterns doesn't exist | - |
| PLGSC-291 | PCK_length formula for TC/TM with new PCK_LENGTH parameter on 4 bytes | - |
ClickUp Issues solved in L4.0.0.0.0 release:
| ID Clickup | Issue Description | Observations |
|---|---|---|
| #1n5zhz | Trap Pump Modes TC Implementation | - |
| #1q3zw4 | Log exit warning on 7x1 | - |
| #1h59qw | Show "SW version" in SimuPUS | - |
| #1azny1 | Sync transition unexpected messages in Terminal | - |
DLR base release
This Tag is only to identify the release that will be the base of the DLR modifications to the DLR's repo.
R2+ (Issue Solution #3)
Release content status:
| File Description | File Release Name | Status |
|---|---|---|
| DE4 HW File | L3_1_5.sof | New release in this tag |
| DE4 SW File | L3_1_5_0_0.elf | New release in this tag |
| NUC Image | NUC_09_00_LESIA.zip | Republished in this tag (no changes from its last release) |
| SimuPUS Setup | SimuPUS_06_00_LESIA.zip | Republished in this tag (no changes from its last release) |
| SD Card Content | SD_04_00_LESIA.zip | Republished in this tag (no changes from its last release) |
| TC/TM Database | TC-TM-Payload_SimuCamPUS_V_0.4.0.zip | Republished in this tag (no changes from its last release) |
| Quick Guide - NUC Upgrade Process | Instructions to Upgrade NUC Application_V2.pdf | Republished in this tag (no changes from its last release) |
Requirements implemented in L3.1.5.0.0 release:
| ID Requirement | Requirement Description | Req. Fully Implemented? | Observations |
|---|---|---|---|
| NA | NA | NA | NA |
JIRA Issues solved in L3.1.5.0.0 release:
| ID JIRA | Issue Description | Observations |
|---|---|---|
| PLGSC-289 | Missing last packet flag with some specific V-Start / V-End configurations | - |
ClickUp Issues solved in L3.1.5.0.0 release:
| ID Clickup | Issue Description | Observations |
|---|---|---|
| NA | NA | NA |
R2+ (Issue Solution #2)
Release content status:
| File Description | File Release Name | Status |
|---|---|---|
| DE4 HW File | L3_1_4.sof | New release in this tag |
| DE4 SW File | L3_1_4_0_0.elf | New release in this tag |
| NUC Image | NUC_09_00_LESIA.zip | New release in this tag |
| SimuPUS Setup | SimuPUS_06_00_LESIA.zip | New release in this tag |
| SD Card Content | SD_04_00_LESIA.zip | Republished in this tag (no changes from its last release) |
| TC/TM Database | TC-TM-Payload_SimuCamPUS_V_0.4.0.zip | Republished in this tag (no changes from its last release) |
| Quick Guide - NUC Upgrade Process | Instructions to Upgrade NUC Application_V2.pdf | Republished in this tag (no changes from its last release) |
Requirements implemented in L3.1.4.0.0 release:
| ID Requirement | Requirement Description | Req. Fully Implemented? | Observations |
|---|---|---|---|
| NA | NA | NA | NA |
JIRA Issues solved in L3.1.4.0.0 release:
| ID JIRA | Issue Description | Observations |
|---|---|---|
| PLGSC-284 | FEE diagnosis with Vend >= 4540 failed on SimuCam 1 | - |
| PLGSC-285 | SimuCam shall not generate and buffer HK packets when the SpaceWire link is not running | - |
| PLGSC-288 | No image packet produced when V-Start = 0 / V-End = 0 | - |
ClickUp Issues solved in L3.1.4.0.0 release:
| ID Clickup | Issue Description | Observations |
|---|---|---|
| NA | NA | NA |
R2+ (Issue Solution #1)
Release content status:
| File Description | File Release Name | Status |
|---|---|---|
| DE4 HW File | L3_1_3.sof | New release in this tag |
| DE4 SW File | L3_1_3_0_0.elf | New release in this tag |
| NUC Image | NUC_08_01_LESIA.zip | Republished in this tag (no changes from its last release) |
| SimuPUS Setup | SimuPUS_05_00_LESIA.zip | Republished in this tag (no changes from its last release) |
| SD Card Content | SD_04_00_LESIA.zip | Republished in this tag (no changes from its last release) |
| TC/TM Database | TC-TM-Payload_SimuCamPUS_V_0.4.0.zip | Republished in this tag (no changes from its last release) |
| Quick Guide - NUC Upgrade Process | Instructions to Upgrade NUC Application_V2.pdf | Republished in this tag (no changes from its last release) |
Requirements implemented in L3.1.0.0.0 release:
| ID Requirement | Requirement Description | Req. Fully Implemented? | Observations |
|---|---|---|---|
| NA | NA | NA | NA |
JIRA Issues solved in L3.1.0.0.0 release:
| ID JIRA | Issue Description | Observations |
|---|---|---|
| PLGSC-260 | The SimuCam 3 is blocked after reset (TC_SCAM_RESET) | Memory access timing chenged |
| PLGSC-277 | The SimuCam 3 is blocked after NUC and FPGA udpate to R2+ and reset (TC_SCAM01_RESET) | Memory access timing chenged |
ClickUp Issues solved in L2.1.0.0.0 release:
| ID Clickup | Issue Description | Observations |
|---|---|---|
| NA | NA | NA |