Release v9.8 (MichaIng#7246)

.build/images/dietpi-build

@@ -92,8 +92,8 @@ case $HW_MODEL in
 	0) iname='RPi' HW_ARCH=${HW_ARCH:-1} boot_size=128 root_size=895;;
 	1) iname='RPi1' HW_ARCH=1 boot_size=128 root_size=895;;
 	2) iname='RPi2' HW_ARCH=2 boot_size=128 root_size=895;;
-	4) iname='RPi234' HW_ARCH=3 boot_size=128 root_size=895;;
-	5) iname='RPi5' HW_ARCH=3 boot_size=128 root_size=895;;
+	4) iname='RPi234' HW_ARCH=3 boot_size=128 root_size=1000;;
+	5) iname='RPi5' HW_ARCH=3 boot_size=128 root_size=1000;;
 	10) iname='OdroidC1' HW_ARCH=2 partition_start=4 boot_size=128 root_size=700 boot_fstype='fat16';;
 	11) iname='OdroidXU4' HW_ARCH=2 partition_start=4 root_size=800;;
 	12) iname='OdroidC2' HW_ARCH=3 partition_start=4 root_size=1148;;
@@ -139,24 +139,26 @@ case $HW_MODEL in
 	73) iname='ROCKPiS' HW_ARCH=3 partition_start=16 root_size=1100;;
 	74) iname='RadxaZero' HW_ARCH=3 partition_start=4 root_size=1148;;
 	75) iname='Container' HW_ARCH=${HW_ARCH:-10} root_size=575;;
-	'76.1') iname='NanoPiR5S' HW_ARCH=3 PTTYPE='gpt' partition_start=16 root_size=1136;;
-	'76.2') iname='NanoPiR5C' HW_ARCH=3 PTTYPE='gpt' partition_start=16 root_size=1136;;
-	77) iname='ROCK3A' HW_ARCH=3 PTTYPE='gpt' partition_start=16 root_size=1136;;
+	'76.1') iname='NanoPiR5S' HW_ARCH=3 PTTYPE='gpt' partition_start=16 root_size=1100;;
+	'76.2') iname='NanoPiR5C' HW_ARCH=3 PTTYPE='gpt' partition_start=16 root_size=1100;;
+	77) iname='ROCK3A' HW_ARCH=3 PTTYPE='gpt' partition_start=16 root_size=1100;;
 	78) iname='ROCK5B' HW_ARCH=3 PTTYPE='gpt' partition_start=16 root_size=1100;;
 	'79.1') iname='NanoPiR6S' HW_ARCH=3 PTTYPE='gpt' partition_start=16 root_size=1100;;
 	'79.2') iname='NanoPiR6C' HW_ARCH=3 PTTYPE='gpt' partition_start=16 root_size=1100;;
 	'79.3') iname='NanoPCT6' HW_ARCH=3 PTTYPE='gpt' partition_start=16 root_size=1100;;
-	80) iname='OrangePi5' HW_ARCH=3 PTTYPE='gpt' partition_start=16 root_size=1136;;
+	80) iname='OrangePi5' HW_ARCH=3 PTTYPE='gpt' partition_start=16 root_size=1100;;
 	81) iname='VisionFive2' HW_ARCH=11 root_size=639;;
 	82) iname='OrangePi5Plus' HW_ARCH=3 PTTYPE='gpt' partition_start=16 root_size=1100;;
 	83) iname='OrangePiZero3' HW_ARCH=3 partition_start=4 root_size=1148;;
 	84) iname='Star64' HW_ARCH=11 root_size=639;;
 	85) iname='ROCK5A' HW_ARCH=3 PTTYPE='gpt' partition_start=16 root_size=1100;;
 	86) iname='ASUSTB2' HW_ARCH=3 partition_start=16 root_size=1100;;
-	87) iname='OrangePi3B' HW_ARCH=3 PTTYPE='gpt' partition_start=16 root_size=1136;;
+	87) iname='OrangePi3B' HW_ARCH=3 PTTYPE='gpt' partition_start=16 root_size=1100;;
 	88) iname='OrangePiZero2W' HW_ARCH=3 partition_start=4 root_size=1148;;
 	89) iname='OrangePi3LTS' HW_ARCH=3 partition_start=4 root_size=1000;;
-	90) iname='RadxaZERO3' HW_ARCH=3 PTTYPE='gpt' partition_start=16 root_size=1136;;
+	90) iname='RadxaZERO3' HW_ARCH=3 PTTYPE='gpt' partition_start=16 root_size=1100;;
+	91) iname='OrangePi5Max' HW_ARCH=3 PTTYPE='gpt' partition_start=16 root_size=1100;;
+	92) iname='NanoPiM6' HW_ARCH=3 PTTYPE='gpt' partition_start=16 root_size=1100;;
 	*) G_DIETPI-NOTIFY 1 "Invalid hardware model \"$HW_MODEL\" passed, aborting..."; exit 1;;
 esac
 
@@ -614,7 +616,7 @@ _EOF_
 
 	# Force ARMv6 arch on Raspbian
 	# shellcheck disable=SC2015
-	(( $HW_ARCH > 1 )) || { echo -e '#/bin/dash\n[ "$*" = -m ] && echo armv6l || /usr/bin/uname "$@"' > rootfs/usr/local/bin/uname && G_EXEC chmod +x rootfs/usr/local/bin/uname; } || Error_Exit 'Failed to generate /usr/local/bin/uname for ARMv6'
+	(( $HW_ARCH > 1 )) || { echo -e '#/bin/dash\n[ "$*" = -m ] && echo armv6l || /bin/uname "$@"' > rootfs/usr/local/bin/uname && G_EXEC chmod +x rootfs/usr/local/bin/uname; } || Error_Exit 'Failed to generate /usr/local/bin/uname for ARMv6'
 
 	# Skip filesystem expansion
 	G_EXEC rm rootfs/etc/systemd/system/local-fs.target.wants/dietpi-fs_partition_resize.service

.build/images/dietpi-imager

@@ -761,11 +761,8 @@ _EOF_
 		(( $SKIP_ARCHIVE )) && exit 0
 
 		# Generate xz archive
-		# NB: LZMA2 ultra compression requires much memory per thread. 1 GiB is not sufficient for >2 threads, hence use "-T2" to limit used CPU threads to "2" on 1 GiB devices with more than two cores.
-		local threads=0
-		(( $(free -m | mawk '/Mem:/{print $2}') < 1750 && $(nproc) > 2 )) && threads=2
 		[[ -f $OUTPUT_IMG_NAME.$OUTPUT_IMG_EXT.xz ]] && G_EXEC rm "$OUTPUT_IMG_NAME.$OUTPUT_IMG_EXT.xz"
-		G_EXEC_DESC='Creating final xz archive' G_EXEC xz -9e -k "-T$threads" "$OUTPUT_IMG_NAME.$OUTPUT_IMG_EXT"
+		G_EXEC_DESC='Creating final xz archive' G_EXEC xz -9e -T0 -M75% -k "$OUTPUT_IMG_NAME.$OUTPUT_IMG_EXT"
 		G_EXEC_DESC='Generating SHA256 hash' G_EXEC eval "sha256sum '$OUTPUT_IMG_NAME.$OUTPUT_IMG_EXT.xz' > '$OUTPUT_IMG_NAME.$OUTPUT_IMG_EXT.xz.sha256'"
 		local signature=() sig_text=''
 		[[ $SIGN_PASS ]] && { G_DIETPI-NOTIFY 2 'Signing archive ...'; gpg --batch --pinentry-mode loopback --passphrase "$SIGN_PASS" -b --armor "$OUTPUT_IMG_NAME.$OUTPUT_IMG_EXT.xz" || exit 1; signature=("$OUTPUT_IMG_NAME.$OUTPUT_IMG_EXT.xz.asc") sig_text="\nSignature:   $PWD/${signature[*]}"; }

.build/images/dietpi-installer

@@ -416,6 +416,7 @@ _EOF_
 						'79.1' ': NanoPi R6S'
 						'79.2' ': NanoPi R6C'
 						'79.3' ': NanoPC T6'
+						'92' ': NanoPi M6'
 						'72.1' ': ROCK 4 (all other variants)'
 						'72.2' ': ROCK 4 SE'
 						'72.3' ': ROCK 4C Plus'
@@ -429,6 +430,7 @@ _EOF_
 						'89' ': Orange Pi 3 LTS'
 						'80' ': Orange Pi 5'
 						'82' ': Orange Pi 5 Plus'
+						'91' ': Orange Pi 5 Max'
 						'83' ': Orange Pi Zero 3'
 						'88' ': Orange Pi Zero 2W'
 						'86' ': ASUS Tinker Board 2'
@@ -628,7 +630,7 @@ _EOF_
 			G_EXEC mv "$dir/.build/images/U-Boot/99-dietpi-uboot" /etc/initramfs/post-update.d/99-dietpi-uboot
 			G_EXEC sed --follow-symlinks -i 's/arm64/arm/' /etc/initramfs/post-update.d/99-dietpi-uboot
 
-		elif [[ $G_HW_MODEL =~ ^(12|15|16|40|42|43|44|45|46|47|48|52|54|55|56|57|58|59|60|62|63|64|65|66|67|68|72|73|74|76|77|78|79|80|82|83|85|86|87|88|89|90)$ ]]
+		elif [[ $G_HW_MODEL =~ ^(12|15|16|40|42|43|44|45|46|47|48|52|54|55|56|57|58|59|60|62|63|64|65|66|67|68|72|73|74|76|77|78|79|80|82|83|85|86|87|88|89|90|91|92)$ ]]
 		then
 			armbian_packages=1
 			G_EXEC mv "$dir/.build/images/U-Boot/boot.cmd" /boot/boot.cmd
@@ -669,7 +671,7 @@ setenv rootuuid "true"' /boot/boot.cmd
 				(( $G_HW_MODEL == 15 )) && G_EXEC eval 'echo '\''meson_rng'\'' > /etc/modules-load.d/dietpi-hwrng.conf'
 
 			# Rockchip 64-bit (configs work with Amlogic OOTB)
-			elif [[ $G_HW_MODEL =~ ^(42|43|46|47|55|56|58|68|72|73|76|77|78|79|80|82|85|86|87|90)$ ]]
+			elif [[ $G_HW_MODEL =~ ^(42|43|46|47|55|56|58|68|72|73|76|77|78|79|80|82|85|86|87|90|91|92)$ ]]
 			then
 				G_EXEC sed --follow-symlinks -Ei '/^setenv (kernel|fdt)_addr_r/d' /boot/boot.cmd
 				G_CONFIG_INJECT 'setenv scriptaddr ' 'setenv scriptaddr "0x9000000"' /boot/boot.cmd
@@ -697,20 +699,19 @@ setenv rootuuid "true"' /boot/boot.cmd
 						esac
 					;;
 					85) G_CONFIG_INJECT 'fdtfile=' 'fdtfile=rockchip/rk3588s-rock-5a.dtb' /boot/dietpiEnv.txt;;
-					87) G_CONFIG_INJECT 'fdtfile=' 'fdtfile=rockchip/rk3566-orangepi-3b.dtb' /boot/dietpiEnv.txt;;
 					*) :;;
 				esac
 				# Overlay prefix
 				case $G_HW_MODEL in
 					73) G_CONFIG_INJECT 'overlay_prefix=' 'overlay_prefix=rk3308' /boot/dietpiEnv.txt;;
-					78|79|80|82|85) G_CONFIG_INJECT 'overlay_prefix=' 'overlay_prefix=rk3588' /boot/dietpiEnv.txt;; # ToDo: There are multiple other prefixes used in the kernel package, "rock-5b", "rock-5ab", "rockchip" (for fixup), so the boot.cmd need heavy adjustments (eliminate the prefix entirely) to work with all overlays.
+					78|79|80|82|85|91|92) G_CONFIG_INJECT 'overlay_prefix=' 'overlay_prefix=rk3588' /boot/dietpiEnv.txt;; # ToDo: There are multiple other prefixes used in the kernel package, "rock-5b", "rock-5ab", "rockchip" (for fixup), so the boot.cmd need heavy adjustments (eliminate the prefix entirely) to work with all overlays.
 					*) G_CONFIG_INJECT 'overlay_prefix=' 'overlay_prefix=rockchip' /boot/dietpiEnv.txt;;
 				esac
 				# Console args
 				case $G_HW_MODEL in
 					73) G_CONFIG_INJECT 'consoleargs=' 'consoleargs=console=ttyS0,1500000' /boot/dietpiEnv.txt;; # headless
 					47|55|56) G_CONFIG_INJECT 'consoleargs=' 'consoleargs=console=ttyS2,1500000' /boot/dietpiEnv.txt;; # headless
-					78|79|80|82|85) G_EXEC sed --follow-symlinks -i 's/ttyAML0,115200/ttyFIQ0,1500000/' /boot/dietpiEnv.txt;; # RK3588
+					78|79|80|82|85|91|92) G_EXEC sed --follow-symlinks -i 's/ttyAML0,115200/ttyFIQ0,1500000/' /boot/dietpiEnv.txt;; # RK3588
 					*) G_EXEC sed --follow-symlinks -i 's/ttyAML0,115200/ttyS2,1500000/' /boot/dietpiEnv.txt;;
 				esac
 
@@ -791,6 +792,11 @@ setenv rootuuid "true"' /boot/boot.cmd
 				G_EXEC mv "$dir/.build/images/NanoPiM3/boot.cmd" /boot/boot.cmd
 				G_EXEC sed --follow-symlinks -i '/overlay/d' /boot/dietpiEnv.txt
 				G_EXEC sed --follow-symlinks -i 's/ttyAML0/ttySAC0/' /boot/dietpiEnv.txt
+				# Device tree
+				case $HW_VARIANT in
+					2) G_CONFIG_INJECT 'fdtfile=' 'fdtfile=s5p6818-nanopi-fire3.dtb' /boot/dietpiEnv.txt;;
+					*) G_CONFIG_INJECT 'fdtfile=' 'fdtfile=s5p6818-nanopi-m3.dtb' /boot/dietpiEnv.txt;;
+				esac
 			fi
 		fi
 
@@ -1136,6 +1142,8 @@ _EOF_
 				88) model='orangepizero2w' kernel='sunxi64';;
 				89) model='orangepi3-lts' kernel='sunxi64';;
 				90) model='radxa-zero3' kernel='rk35xx' branch='legacy';;
+				91) model='orangepi5-max' kernel='rk35xx' branch='vendor';;
+				92) model='nanopi-m6' kernel='rk35xx' branch='vendor';;
 				*) :;;
 			esac
 
@@ -1272,7 +1280,7 @@ _EOF_
 				# tiny-initramfs to satisfy dependency: https://github.com/RPi-Distro/repo/issues/358
 				G_AGI raspi-firmware
 				G_CONFIG_INJECT 'SKIP_INITRAMFS_GEN=' 'SKIP_INITRAMFS_GEN=yes' /etc/default/raspi-firmware
-				G_AGI "${kernel[@]}" raspi-utils raspberrypi-sys-mods raspberrypi-archive-keyring "${a32bit[@]}" tiny-initramfs
+				G_AGI "${kernel[@]}" raspi-utils-core raspberrypi-sys-mods raspberrypi-archive-keyring "${a32bit[@]}" tiny-initramfs
 				G_EXEC apt-mark auto tiny-initramfs
 				G_EXEC rm -f /boot/initrd.img-* /boot/firmware/initramfs*
 			else
@@ -1957,8 +1965,8 @@ _EOF_'
 		then
 			/boot/dietpi/func/dietpi-set_hardware serialconsole enable ttyS1
 
-		# Rockchip vendor: ROCK 5B, NanoPi 6, Orange Pi 5, Orange Pi 5 Plus, ROCK 5A, Radxa ZERO 3
-		elif [[ $G_HW_MODEL =~ ^(78|79|80|82|85|90)$ ]]
+		# Rockchip vendor/legacy: ROCK 5B, NanoPi 6, Orange Pi 5, Orange Pi 5 Plus, ROCK 5A, Radxa ZERO 3
+		elif [[ $G_HW_MODEL =~ ^(78|79|80|82|85|90|91|92)$ ]]
 		then
 			/boot/dietpi/func/dietpi-set_hardware serialconsole enable ttyFIQ0
 

.build/software/Amiberry/container_build.bash

@@ -115,7 +115,7 @@ G_EXEC mount "${FP_LOOP}p1" rootfs
 
 # Enforce ARMv6 arch on Raspbian
 # shellcheck disable=SC2015
-(( $arch > 1 )) || { echo -e '#/bin/dash\n[ "$*" = -m ] && echo armv6l || /usr/bin/uname "$@"' > rootfs/usr/local/bin/uname && G_EXEC chmod +x rootfs/usr/local/bin/uname; } || Error_Exit 'Failed to generate /usr/local/bin/uname for ARMv6'
+(( $arch > 1 )) || { echo -e '#/bin/dash\n[ "$*" = -m ] && echo armv6l || /bin/uname "$@"' > rootfs/usr/local/bin/uname && G_EXEC chmod +x rootfs/usr/local/bin/uname; } || Error_Exit 'Failed to generate /usr/local/bin/uname for ARMv6'
 
 # Enable automated setup
 G_CONFIG_INJECT 'AUTO_SETUP_AUTOMATED=' 'AUTO_SETUP_AUTOMATED=1' rootfs/boot/dietpi.txt

.build/software/dietpi-software-build.bash

@@ -119,7 +119,7 @@ G_EXEC mount "${FP_LOOP}p1" rootfs
 
 # Enforce ARMv6 arch on Raspbian
 # shellcheck disable=SC2015
-(( $arch > 1 )) || { echo -e '#/bin/dash\n[ "$*" = -m ] && echo armv6l || /usr/bin/uname "$@"' > rootfs/usr/local/bin/uname && G_EXEC chmod +x rootfs/usr/local/bin/uname; } || Error_Exit 'Failed to generate /usr/local/bin/uname for ARMv6'
+(( $arch > 1 )) || { echo -e '#/bin/dash\n[ "$*" = -m ] && echo armv6l || /bin/uname "$@"' > rootfs/usr/local/bin/uname && G_EXEC chmod +x rootfs/usr/local/bin/uname; } || Error_Exit 'Failed to generate /usr/local/bin/uname for ARMv6'
 
 # Enable automated setup
 G_CONFIG_INJECT 'AUTO_SETUP_AUTOMATED=' 'AUTO_SETUP_AUTOMATED=1' rootfs/boot/dietpi.txt

.build/software/sprd-bluetooth/build.bash

@@ -66,6 +66,8 @@ then
 fi
 _EOF_
 
+G_EXEC chmod +x sprd-bluetooth/DEBIAN/{postinst,prerm,postrm}
+
 # - md5sums
 find sprd-bluetooth ! \( -path sprd-bluetooth/DEBIAN -prune \) -type f -exec md5sum {} + | sed 's|sprd-bluetooth/||' > sprd-bluetooth/DEBIAN/md5sums
 
@@ -79,8 +81,8 @@ Date: $(date -uR)
 Installed-Size: $(du -sk sprd-bluetooth | mawk '{print $1}')
 Section: admin
 Priority: optional
-Homepage: https://github.com/RPi-Distro/sprd-bluetooth
-Description: System tweaks for the Raspberry Pi, DietPi edition
+Homepage: https://github.com/orangepi-xunlong/orangepi-build/tree/next/external/packages/blobs/bt/hciattach
+Description: Spreadtrum (sprd) Bluetooth support
 _EOF_
 G_CONFIG_INJECT 'Installed-Size: ' "Installed-Size: $(du -sk sprd-bluetooth | mawk '{print $1}')" sprd-bluetooth/DEBIAN/control
 

.conf/dps_39/minidlna.conf

@@ -1,5 +1,5 @@
-# WARNING: After changing this option, you need to restart the service
-#          via: "systemctl restart minidlna"
+# Note: After changing this option, you need to restart the service
+#       via: "systemctl restart minidlna"
 
 # Media paths
 media_dir=A,/mnt/dietpi_userdata/Music
@@ -11,7 +11,7 @@ db_dir=/mnt/dietpi_userdata/.MiniDLNA_Cache
 
 # Must be one of "off", "fatal", "error", "warn", "info" or "debug".
 # "off" turns of logging entirely, "fatal" is the highest level of importance.
-# Access logs via: "journalctl -u minidlna", on Bullseye in /var/log/minidlna.
+# Access logs via: "journalctl -u minidlna" and /var/log/minidlna.
 log_level=warn
 
 # Use a different container as the root of the directory tree presented to

.github/workflows/dietpi-software.bash

@@ -201,7 +201,7 @@ Process_Software()
 			164) aSERVICES[i]='nukkit' aUDP[i]='19132'; (( $arch == 10 )) || aDELAY[i]=60;;
 			165) aSERVICES[i]='gitea' aTCP[i]='3000'; (( $arch < 10 )) && aDELAY[i]=30;;
 			#166) aSERVICES[i]='pi-spc';; Service cannot reasonably start in container as WirinPi's gpio command fails reading /proc/cpuinfo
-			167) aSERVICES[i]='raspotify';;
+			167) (( $arch < 3 )) || aSERVICES[i]='raspotify';; # 32-bit ARM fails with: "arm-binfmt-P: /usr/bin/librespot: Unable to find a guest_base to satisfy all guest address mapping requirements"
 			#169) aSERVICES[i]='voice-recognizer';; "RuntimeError: This module can only be run on a Raspberry Pi!"
 			170) aCOMMANDS[i]='unrar -V';;
 			#171) aSERVICES[i]='frps frpc' aTCP[i]='7000 7400 7500';; Interactive install with service and ports depending on server/client/both choice
@@ -320,7 +320,7 @@ G_EXEC mount "${FP_LOOP}p1" rootfs
 
 # Force ARMv6 arch on Raspbian
 # shellcheck disable=SC2015
-(( $arch > 1 )) || { echo -e '#/bin/dash\n[ "$*" = -m ] && echo armv6l || /usr/bin/uname "$@"' > rootfs/usr/local/bin/uname && G_EXEC chmod +x rootfs/usr/local/bin/uname; } || Error_Exit 'Failed to generate /usr/local/bin/uname for ARMv6'
+(( $arch > 1 )) || { echo -e '#/bin/dash\n[ "$*" = -m ] && echo armv6l || /bin/uname "$@"' > rootfs/usr/local/bin/uname && G_EXEC chmod +x rootfs/usr/local/bin/uname; } || Error_Exit 'Failed to generate /usr/local/bin/uname for ARMv6'
 
 # Force RPi on ARM systems if requested
 if [[ $RPI == 'true' ]] && (( $arch < 10 ))

.meta/dietpi-survey_report

@@ -95,6 +95,8 @@ shopt -s extglob
 		[88]='Orange Pi Zero 2W'
 		[89]='Orange Pi 3 LTS'
 		[90]='Radxa ZERO 3'
+		[91]='Orange Pi 5 Max'
+		[92]='NanoPi M6'
 	)
 
 	## Benchmark data arrays: aBENCH_XX[$HW_MODEL,${aBENCH_XX_INDEX[$HW_MODEL]}]
@@ -729,13 +731,15 @@ shopt -s extglob
 	aSOFTWARE_NAME9_6[213]='soju'
 
 	aSOFTWARE_NAME9_7=()
+	aSOFTWARE_NAME9_8=()
 	for i in "${!aSOFTWARE_NAME9_6[@]}"
 	do
 		aSOFTWARE_NAME9_7[i]=${aSOFTWARE_NAME9_6[i]}
+		aSOFTWARE_NAME9_8[i]=${aSOFTWARE_NAME9_7[i]}
 	done
 
 	# Pre-create software counter array so that we can see also software (available in newest version) with 0 installs
-	for i in "${aSOFTWARE_NAME9_7[@]}"
+	for i in "${aSOFTWARE_NAME9_8[@]}"
 	do
 		aSOFTWARE[$i]=0
 	done
@@ -791,7 +795,7 @@ shopt -s extglob
 			eval "software=\${aSOFTWARE_NAME${version/./_}[$software]}"
 			if [[ ! $software ]]
 			then
-				echo "Invalid software ID for DietPi version $version"
+				echo "Invalid software ID \"$software\" for DietPi version $version"
 				mv -v "/home/dietpi-survey/survey/$file" /home/dietpi-survey/invalid/
 				return 1
 			fi
@@ -1005,9 +1009,13 @@ shopt -s extglob
 
 			# Work out averages
 			# - Divide CPU times by 100 and scale to revert decimal point removal
-			aBENCH_RESULT_CPU_MIN[i]=$(printf '%.2f' "${aBENCH_RESULT_CPU_MIN[i]}e-2")
-			aBENCH_RESULT_CPU_MAX[i]=$(printf '%.2f' "${aBENCH_RESULT_CPU_MAX[i]}e-2")
-			aBENCH_RESULT_CPU_AVG[i]=$(printf '%.2f' "$((${aBENCH_RESULT_CPU_AVG[i]}*10/${aBENCH_CPU_INDEX[i]}+1))e-3")
+			#aBENCH_RESULT_CPU_MIN[i]=$(printf '%.2f' "${aBENCH_RESULT_CPU_MIN[i]}e-2")
+			#aBENCH_RESULT_CPU_MAX[i]=$(printf '%.2f' "${aBENCH_RESULT_CPU_MAX[i]}e-2")
+			#aBENCH_RESULT_CPU_AVG[i]=$(printf '%.2f' "$((${aBENCH_RESULT_CPU_AVG[i]}*10/${aBENCH_CPU_INDEX[i]}+1))e-3")
+			# - Workaround for current bash printf bug: https://bugs.debian.org/1078556
+			aBENCH_RESULT_CPU_MIN[i]=$(mawk "{printf \"%.2f\", ${aBENCH_RESULT_CPU_MIN[i]}e-2}" <<< '')
+			aBENCH_RESULT_CPU_MAX[i]=$(mawk "{printf \"%.2f\", ${aBENCH_RESULT_CPU_MAX[i]}e-2}" <<< '')
+			aBENCH_RESULT_CPU_AVG[i]=$(mawk "{printf \"%.2f\", $((${aBENCH_RESULT_CPU_AVG[i]}*10/${aBENCH_CPU_INDEX[i]}+1))e-3}" <<< '')
 
 			# CPU temps if available
 			aBENCH_RESULT_CPU_TEMP_START_MIN[i]='N/A'