rvi_mobile_unlock

RVI Mobile Unlock demo android app.

App that will discover and iBeacon and try to establish a BT RFCOMM socket to the car. On the car side right now there is a Raspberry PI executing the Erlang RVI stack. The PI has to have BT scanning on and also BT LE announcement of the Beacon

sudo hciconfig hci0 piscan leadv
sudo hcitool -i hci0 cmd 0x08 0x0008 1E 02 01 1A 1A FF 4C 00 02 15 33 43 33 43 46 46 47 45 38 45 54 32 39 31 34 30 39 00 00 00 C5 00
sudo hcitool -i hci0 cmd 0x08 0x0006 A0 00 A0 00 03 00 00 00 00 00 00 00 00 07 00
sudo hcitool -i hci0 cmd 0x08 0x000a 01

Note that the Beacon will change. Right now is a proper iBeacon and can be detected with any apps. One good in particular is the Locate App iOS App or Android App

INSTALL

• Raspbian
• rvi_0.4.0
• fob.py
• jsonrpclib + rvilib.py
• apt-get install bluez
• /etc/rc.local
• /etc/bluetooth/main.conf Add DisablePlugins = pnat

TO BUILD

• sudo apt-get update
• apt-get install libbluetooth-dev
• apt-get install git
• apt-get install libssl-dev
• apt-get install libncurses-dev
• Unpack OTP R16B03
• ./configure --prefix=/usr
• make
• make install

SET UP IN VEHICLE

Default pin configuration is below, with all pins assumed to be active high:

GPIO_UNLOCK = 5
GPIO_LOCK   = 6
GPIO_LIGHTS = 13
GPIO_TRUNK  = 19
GPIO_PANIC  = 26
GPIO_START  = 20
GPIO_STOP   = 21