Skip to content

Scavanger/MSPWifiBridge

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

1 Commit
 
 
 
 
 
 
 
 

Repository files navigation

MSPWIfiBridge

With MSPWIfiBride, flight controllers with MSP protocol can be easily configured wirelessly via Wifi.

  • MSP error checking
  • Easy to use web configuration
  • Station and access point mode
  • TCP and UDP support
  • OTA updates

Supported Hardware

  • NodeMCU V2/3
  • ESP-01(M)
  • ESP 12E/f
  • ESP32 (Not tested!)

Wiring

Connect the UART of the ESP module to a UART of the flight controller. Attention: The small ESP8266 modules only tolerate 3.3 V supply voltage. Set the UART of the flight controller to MSP, with the configured baud rate, default is 115200 baud.

Configuration:

After flashing, connect to the network "MSPWifiBridge". Wifi key: 123456789 If there is no automatic forwarding to the configuration page, go to http://192.168.4.1 manually. Standard login data: Username: admin Password: 123456789

Flashing

Use Visual Studio Code and PlatformIO to compile and flash the code yourself or use the precompiled binary files under releases and use "NodeMCU Flasher" https://github.com/nodemcu/nodemcu-flasher/ For the NodeMCU modules you can simply use the integrated USB port, for the small modules without USB you need a USB/serial converter (FTDI232 or similar). GPIO0 must be pulled to GND during power up to enter bootloader mode.

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Packages

No packages published

Languages