Skip to content

Info: key combinations

Iwan1803 edited this page Mar 18, 2024 · 26 revisions

Many key combinations can be looked up in the FS22 key assignments and/or freely assigned.

Show/hide mouse pointer: middle mouse button

PDA and helper map

if activated in the personal settings:

  • set upper target point: LMB on an AD target point
  • set lower target point: RMB on an AD target point

Parking

  • assign parking lot (in edit mode): LCTRL + RMB on P in the HUD
  • delete parking lot (in edit mode): LALT + RMB on P in the HUD
  • send to parking lot: LMB on P in the HUD

Lines

in edit mode (while driving)

  • record green line: LMB on REC
  • record light blue line (backward): LMB on REC, then drive backward
  • record blue line: RMB on REC
  • record orange line: LShift + LMB on REC
  • record brown line: LShift + RMB on REC
  • NOTE: as soon as you reverse during recording, a reverse line (light blue) will be recorded!

Waypoints

in edit mode

  • show/hide waypoints: press RCTRL
  • create one waypoint: LCTRL + LMB
  • create oneway line: hold down LCTRL and press then LMB to create the waypoints
  • create twoway line: hold down LCTRL + LALT and press then LMB to create the waypoints
  • create oneway secondary< route line: hold down LCTRL + LShift and press then LMB to create the waypoints
  • connect green line: LMB on 1st waypoint, LMB on 2nd waypoint
  • connect blue line: LMB on 2nd waypoint, LMB on 1st waypoint
  • connect orange line: LMB on 1st waypoint, LShift + LMB on 2nd waypoint
  • connect brown line: LMB on 2nd waypoint, LShift + LMB on 1st waypoint
  • connect light blue line (backward): LMB on 1st waypoint, RShift + LMB on 2nd waypoint
  • change waypoint priority: LShift + LMB on waypoint
  • delete waypoint: LALT + LMB on waypoint
  • move waypoint: grab with RMB and move it
  • move waypoint on same altitude: grab with RMB, press and hold LShift, then move the waypoint
  • change waypoints between 2 intersections / behind 1 intersection -> change priority: 1. LMB on crossing waypoint, 2. LShift + LMB on 1st waypoint behind the crossing
  • change waypoints between 2 intersections / behind 1 intersection -> change direction: 1. LMB on crossing waypoint, 2. LCTRL + LMB on 1st waypoint behind the crossing
  • delete waypoints between 2 intersections / behind 1 intersection: 1. LMB on crossing waypoint, 2. LShift + LCTRL + LALT + LMB on 1st waypoint behind the crossing
  • Curve between 2 waypoints: LMB to waypoint, point mouse cursor to the other waypoint, turn mouse wheel until the desired curve is reached and then LMB to the waypoint

Abbreviations

  • LMB = left mouse button
  • RMB = right mouse button
  • LCTRL = left STRG key
  • RCTRL = right STRG key
  • LALT = left ALT key
  • LShift = left Shift key
  • RShift = right Shift key