SoundReact

Arduino project for a sound reacting 5V non-addressable RGB LED Strip.

Note

Make sure you are using a non-addressable RGB LED, with 4 contacts.

For this project you need:

• Any Arduino (I tested on Arduino UNO)
• Sound Sensor (I used a sensor based on LM393)
• RGB Strip (I used a 2-meter long one)

Usage

• Connect all pins as shown on Connection-schematic.jpg.
• Set the value of minNum and maxNum as you like. A higher value will result in a slower change of colors. (As I experimented, I found out that the range 4000-15000 looks the best)

License

This software is available under the following licenses:

• MIT