Keycloak as a Verifiable Credential Issuer with OID4VCI

This guide walks you through configuring Keycloak to issue Verifiable Credentials (VCs) using the OpenID for Verifiable Credential Issuance (OID4VCI) protocol.

TLDR

Checkout this project.

Checkout, Build and Deploy keycloak

Prerequisites

Before proceeding, ensure you have the following tools installed on your system:

• OpenSSL: A command-line tool for working with SSL/TLS certificates, keys, and other cryptographic functions.
• Keytool: A Java key and certificate management utility included with the Java Development Kit (JDK).

Verification: You can verify that the tools are working by running:

openssl version
keytool -version

Script

In the project directory execute following scripts (tested on debian & ubuntu linux only):

# checkout build and start keycloak on localhost:8443
./0.start-kc-oid4vci.sh 

This will start keycloak in the background on https://localhost:8443. Wait for Keycloak to start

Keycloak Configuration for Verifiable Credential Issuance

To set up Keycloak for Verifiable Credential Issuance, we use a script that utilizes the Keycloak Config CLI tool. This script imports the necessary configurations into a dedicated realm.

Step-by-Step Configuration

1. Check the .env File

   Before running the configuration script, ensure your .env file is set up correctly. This file contains important environment variables that connect the script to your Keycloak server.

   Key variables to review:

   • KEYCLOAK_URL: URL of your Keycloak server.
   • KEYCLOAK_ADMIN: Admin username for Keycloak.
   • KEYCLOAK_ADMIN_PASSWORD: Admin password for Keycloak.

2. Run the Configuration Script

   After verifying your .env file, run the following script to configure your Keycloak environment:

   # Export Keycloak configuration
   ./config/export_kc_config.sh

We can also configure Keycloak manually using the kcadm.sh tool. This shall be executed on the same machine, as it uses kcadm.sh on localhost to access the admin interface and shares generated keystore files with Keycloak.

Prerequisites

Before proceeding with OID4VCI configuration, ensure you have the following tools and components ready:

• Keycloak Built from Source: The Keycloak Admin CLI (kcadm.sh) will be available in the bin directory of the Keycloak installation.

• Java Keytool: see above

• OpenSSL: see above

• jq (Optional): jq is a handy command-line JSON processor that can simplify some of the configuration tasks in this guide.

Verification: You can verify that the tools are working by running:

keytool -version
openssl version
jq --version

Script

In the project directory execute following scripts (tested on debian & ubuntu linux only):

# Configure oid4vci protocol
./1.oid4vci_test_deployment.sh

# Create a user account
./2.configure_user_4_account_client.sh

Requesting Credentials

Uses only curl to access keycloak interfaces. The -k of curl disables ssl certificate validation.

Request a credential without key binding

./3.retrieve_test_credential.sh

Request a credential with key binding

./3.retrieve_IdentityCredential.sh

Detailed Description

Building and Deploying Keycloak

Prerequisites

See TLDR

The .env File

All environment variables defined here are to be found in a .env file source ahead of executing any command.

Choosing the Keycloak Branch to Build From

Keycloak's OID4VCI feature is still under active development, with changes happening frequently. This means the specific branch you clone from will determine the available functionality and potential issues you might encounter.

The current version of this work builds on to of pull request #30692 (related to issue #30525).

• If this PR is merged: You can safely clone from the main branch of the official Keycloak repository:

  KC_REMOTE=https://github.com/keycloak/keycloak.git
  KC_TARGET_BRANCH=main 

• As long as this PR is NOT merged: Clone the issue-30525 branch from the adorsys/keycloak-oid4vc fork:

  KC_REMOTE=https://github.com/adorsys/keycloak-oid4vc.git
  KC_TARGET_BRANCH=issue-30525 

  This branch should contain the latest changes related to OID4VCI, but be aware it might not be as stable as the official main branch.

• Environment Variable Summary:

  KC_OID4VCI="keycloak_"$KC_TARGET_BRANCH # Example: keycloak_issue-30525

  This combines the name "keycloak" with your chosen branch for convenient project naming.

Cloning and Building Keycloak

You can the clone and build keycloak as defined in 0.start-kc-oid4vci.sh. This might take a while.

Generating SSL Keys for Keycloak

In this documentation, we run Keycloak with SSL enabled. This ensures consistent behavior with production setups and helps avoid potential issues when accessing the administration interface or integrating with other applications.

The following script, generate-kc-certs.sh, automates the process of creating a self-signed certificate for Keycloak. It then imports the certificate's public key into a truststore, which can be used by the Keycloak Admin CLI to establish a trusted connection.

The cert config file can be found at: cert-config.txt

#!/bin/bash
# Source environment variables
. load_env.sh

openssl req -newkey rsa:2048 -nodes \
  -keyout "${KC_SERVER_KEY}" -x509 -days 3650 -out "${KC_SERVER_CERT}" -config "${WORK_DIR}/cert-config.txt"

keytool -importcert -trustcacerts -noprompt -alias localhost -file "${KC_SERVER_CERT}" -keystore "${KC_TRUST_STORE}" -storepass "${KC_TRUST_STORE_PASS}"

Keycloak Startup with SSL

After generating ssl keys, you can start Keycloak with SSL enabled, as indicated in 0.start-kc-oid4vci.sh

echo "unpacking keycloak ..."
cd $TOOLS_DIR && tar xzf $TARGET_DIR/$KC_OID4VCI/quarkus/dist/target/keycloak-999.0.0-SNAPSHOT.tar.gz || { echo 'Could not unpack keycloak' ; exit 1; }

# Starts keycloak with OID4VCI feature

# Use org.keycloak.quarkus._private.IDELauncher if you want to debug through keycloak sources
export KEYCLOAK_ADMIN=$KEYCLOAK_ADMIN && export KEYCLOAK_ADMIN_PASSWORD=$KEYCLOAK_ADMIN_PASSWORD && cd $KC_INSTALL_DIR && bin/kc.sh $KC_START --features=oid4vc-vci

For an external deployment, make sure you modify the keycloak admin password.

Recall the start command in .env file is:

KC_START="start --hostname-strict=false --https-port=$KEYCLOAK_HTTPS_PORT --https-certificate-file=$KC_SERVER_CERT --https-certificate-key-file=$KC_SERVER_KEY"

Configuring Keycloak to Service Verifiable Credentials

Prerequisites

See TLDR

All in One

All steps described bellow can be achieved running the script 1.oid4vci_test_deployment.sh.

Keycloak Admin CLI

Although they are many integrated ways of administering keycloak. We will be using the keycloak kcadm.sh as we want the reader to try out on a shell and achieve quick results. For a more complex deployment, we will be using keycloak-config-cli.

Accessing the Keycloak admin interface with SSL

The following lines will allow you to configure a truststore for used by kcadm.sh and obtain and administrator access token to perform administrative tasks.

# Set a trust store for kcadm.sh
$KC_INSTALL_DIR/bin/kcadm.sh config truststore --trustpass $KC_TRUST_STORE_PASS $KC_TRUST_STORE
echo "Obtaining admin token..."
# Get admin token using environment variables for credentials
$KC_INSTALL_DIR/bin/kcadm.sh config credentials --server $KEYCLOAK_ADMIN_ADDR --realm master --user $KEYCLOAK_ADMIN --password $KEYCLOAK_ADMIN_PASSWORD

Setting the Issuer Identifier (DID)

In the decentralized identity ecosystem, a Decentralized Identifier (DID) is a unique identifier that can be resolved to a DID Document. This document contains information about the entity identified by the DID, such as its public keys and service endpoints. Keycloak, as a VC issuer, needs a DID to clearly identify itself. Other parties may dereference this DID Document (or its associated endpoint) to retrieve the cryptographic material needed to validate credentials issued by Keycloak.

The following batch command sets the issuerDid attribute for your realm (e.g., "master") using the value configured in your .env file:

# Add realm attribute issuerDid
echo "Updating realm attributes for issuerDid..."
$KC_INSTALL_DIR/bin/kcadm.sh update realms/master -s attributes.issuerDid=$ISSUER_DID || { echo 'Could not set issuer did' ; exit 1; }

Configuring a Keycloak ECDSA Signing Key for Verifiable Credentials

Just like a regular bearer token, Keycloak issues VCs. These can be in various formats, such as SD-JWT (JSON documents). Keycloak can sign VCs using its native RSA key pair or, as required by some pilot programs, an Elliptic Curve (EC) key pair. In the latter case, we'll generate the EC key and add it to Keycloak's configuration.

1. Generating an ECDSA Key:

We'll use the keytool command (part of the Java Development Kit) to create an ECDSA key pair:

keytool \
  -genkeypair \
  -keyalg EC \
  -keysize 256 \
  -keystore "${KEYCLOAK_KEYSTORE_FILE}" \
  -storepass "${KEYCLOAK_KEYSTORE_PASSWORD}" \
  -alias "${KEYCLOAK_KEYSTORE_ECDSA_KEY_ALIAS}" \
  -keypass "${KEYCLOAK_KEYSTORE_PASSWORD}" \
  -storetype "${KEYCLOAK_KEYSTORE_TYPE}" \
  -dname "CN=ECDSA Signing Key, OU=Keycloak, O=YourOrganization"

2. Preparing the Keycloak Configuration:

Next, we'll create a JSON file that describes the key to Keycloak. This file will be used by the kcadm.sh tool to add the key to the Keycloak configuration.

{
  "id": "ecdsa-issuer-key",
  "name": "ecdsa-issuer-key",
  "providerId": "java-keystore",
  "providerType": "org.keycloak.keys.KeyProvider",
  "config": {
    "keystore": ["${KEYCLOAK_KEYSTORE_FILE}"],
    "keystoreType": ["${KEYCLOAK_KEYSTORE_TYPE}"],
    "keystorePassword": ["${KEYCLOAK_KEYSTORE_PASSWORD}"],
    "keyAlias": ["${KEYCLOAK_KEYSTORE_ECDSA_KEY_ALIAS}"],
    "keyPassword": ["${KEYCLOAK_KEYSTORE_PASSWORD}"],
    "active": ["true"],
    "priority": ["0"],
    "enabled": ["true"],
    "algorithm": ["ES256"]
  }
}

Key points:

• providerId: "java-keystore" refers to the Keycloak Java KeyStore key provider.
• algorithm: "ES256" specifies the ECDSA algorithm with SHA-256.

3. Adding the Key to Keycloak:

In order to fill up this template in a shell environment, we need a tool like jq, that can manipulate json files on the command line (as mentioned in the prerequisites).

# Add concrete info and passwords to key provider
echo "Configuring ecdsa key provider..."
cat $WORK_DIR/issuer_key_ecdsa.json | \
  jq --arg keystore "$KEYCLOAK_KEYSTORE_FILE" \
  --arg keystorePassword "$KEYCLOAK_KEYSTORE_PASSWORD" \
  --arg keystoreType "$KEYCLOAK_KEYSTORE_TYPE" \
  --arg keyAlias "$KEYCLOAK_KEYSTORE_ECDSA_KEY_ALIAS" \
  --arg keyPassword "$KEYCLOAK_KEYSTORE_PASSWORD" \
  '.config.keystore = [$keystore] | 
   .config.keystorePassword = [$keystorePassword] |
   .config.keystoreType = [$keystoreType] | 
   .config.keyAlias = [$keyAlias] | 
   .config.keyPassword = [$keyPassword]' \
  > $TARGET_DIR/issuer_key_ecdsa-tmp.json 

4. Adding the Key to the Keycloak Realm:

The following bash command will add the ec key to the keycloak realm master and configure it to produce JWS ES256 signature (ECDSA on curve P-256).

# Register the EC-key with Keycloak
echo "Registering issuer key ecdsa..."
$KC_INSTALL_DIR/bin/kcadm.sh create components -r master -o -f - < $TARGET_DIR/issuer_key_ecdsa-tmp.json || { echo 'ECDSA Issuer Key registration failed' ; exit 1; }

Defining VCs in Keycloak

Keycloak's strength as an identity provider naturally extends to its role as a VC issuer. VCs, like tokens, are digitally signed pieces of information, but they go beyond authentication to grant specific rights or attributes. By leveraging Keycloak's established infrastructure, organizations can benefit from its extensive experience in managing and securing identity-related data, including the crucial signing keys used for VCs.

VCs as Tokens

In Keycloak, the structure of a VC closely resembles that of a token. Both are essentially claims about an entity (a user, organization, etc.), packaged in a structured format and digitally signed for authenticity.

Protocol Mappers: Shaping VC Content

Just as Keycloak's protocol mappers determine the information included in a token, they play a vital role in shaping the content of VCs. These mappers are responsible for:

1. Retrieving: Fetching data from Keycloak's user database or external sources.
2. Formatting: Transforming the data into the appropriate format for the VC.
3. Adding: Including the formatted data as claims within the VC.

Clients and the OID4VCI Protocol

The definition of a VC's structure in Keycloak is closely tied to the client that requests it. In the context of VCs, the client interacts with Keycloak using the OID4VCI protocol, which defines the necessary endpoints for requesting and receiving VCs.

A Keycloak client configuration for OID4VCI looks like this:

{
  "clientId": "oid4vci-client",
  "name": "OID4VC-VCI Client",
  "protocol": "oid4vc",
  "enabled": true,
  "publicClient": true,
  "attributes": {
    "vc.test-credential.expiry_in_s": 100,
    "vc.test-credential.format": "vc+sd-jwt",
    "vc.test-credential.scope": "test-credential",
    "// ...": "other VC configurations for additional credential types"
  },
  "protocolMappers": [
    "// ... (protocol mapper definitions)"
  ]
}

Creating the OID4VCI Client

To register this client with Keycloak, use the following command:

# Create client for oid4vci
echo "Creating OID4VCI client..."
$KC_INSTALL_DIR/bin/kcadm.sh create clients -o -f - < $WORK_DIR/client-oid4vc.json || { echo 'OID4VCIClient creation failed' ; exit 1; }

Protocol Mapper Example

Here's an example of a protocol mapper within the client configuration:

{
  "id": "given_name-mapper-001",
  "name": "given_name-mapper",
  "protocol": "oid4vc",
  "protocolMapper": "oid4vc-user-attribute-mapper",
  "config": {
    "subjectProperty": "given_name",
    "userAttribute": "firstName",
    "supportedCredentialTypes": "identity_credential"
  }
}

This mapper extracts the user's firstName attribute and includes it as the given_name claim in VCs of the "identity_credential" type.

Verifiable Credential Formats and Signing Services

Keycloak's OID4VCI implementation supports multiple formats for VCs, including:

• LDP_VC: Linked Data Proof Verifiable Credentials, as defined in the W3C Verifiable Credentials Data Model specification (https://www.w3.org/TR/vc-data-model/).
• JWT_VC: JSON Web Token Verifiable Credentials, based on the JWT VC Presentation Profile (https://identity.foundation/jwt-vc-presentation-profile/).
• SD-JWT: Self-Issued OpenID Provider (SIOP) v2 JSON Web Token Verifiable Credentials, as defined in the IETF OAuth SD-JWT VC draft (https://drafts.oauth.net/oauth-sd-jwt-vc/draft-ietf-oauth-sd-jwt-vc.html).

Each format has its own way of representing and signing the VC. Keycloak utilizes the VerifiableCredentialsSigningService interface to accommodate these different formats.

Signing Service Configurations

To support a specific format, a corresponding signing service must be active. Signing services can be configured to handle all credential types of a given format. However, you'll often need specific signing service configurations for certain credential types, allowing you to tailor the signing process to their unique requirements.

Example: Signing Service for IdentityCredential

Here's an example of a signing service configuration for a credential type called IdentityCredential using the SD-JWT format:

{
  "id": "sd-jwt-signing/IdentityCredential",
  "name": "sd-jwt-signing-service for IdentityCredential",
  "providerId": "vc+sd-jwt",
  "providerType": "org.keycloak.protocol.oid4vc.issuance.signing.VerifiableCredentialsSigningService",
  "config": {
    "algorithmType": ["ES256"],
    "hashAlgorithm": ["sha-256"],
    "tokenType": ["vc+sd-jwt"],
    "vcConfigId": ["IdentityCredential"],
    "decoys": [2]  
  }
}

Note: decoys are optional number of decoy claims for privacy enhancement

Key Configuration Points:

• providerId: Indicates the VC format this service handles ("vc+sd-jwt" for SD-JWT).
• vcConfigId: Identifies the specific credential type this instance is responsible for ("IdentityCredential" in this case).
• algorithmType: Specifies the signing algorithm (e.g., "ES256" for ECDSA with SHA-256). If you don't provide a specific key ID, Keycloak will automatically select the active key that supports the specified algorithm.

Registering a Signing Service:

You can register this signing service with Keycloak using the following command:

echo "Creating signing service component for IdentityCredential..."
$KC_INSTALL_DIR/bin/kcadm.sh create components -r master -o -f - < "$WORK_DIR/signing_service-IdentityCredential.json" || { echo 'Could not create signing service component for IdentityCredential' ; exit 1; }

After registering a signing service, keycloak is ready to deliver a verifiable credential for the given credential type and format.

Key Endpoints

Credential Issuer Metadata Endpoint

This endpoint is mandatory and describes the issuer's capabilities, including supported credential types, formats, cryptographic binding methods, and display information. It also provides the URLs for other essential endpoints like the credential_endpoint, batch_credential_endpoint, and deferred_credential_endpoint. The current keycloak implementation supports only the credential endpoint.

• URL: https://<your-keycloak-host>/realms/<your-realm>/.well-known/openid-credential-issuer
• e.g: http://localhost:8443/realms/master/.well-known/openid-credential-issuer

OpenID Configuration Endpoint

This endpoint is mandatory in OpenID Connect and provides general metadata about the issuer's OpenID Connect configuration, such as supported scopes, response types, and grant types. While not specific to OID4VCI, it's essential for the overall OpenID Connect flow that underpins VC issuance.

• URL: https://<your-keycloak-host>/realms/<your-realm>/.well-known/openid-configuration
• e.g.: http://localhost:8443/realms/master/.well-known/openid-configuration

JWT Issuer Endpoint

This endpoint is optional and provides metadata specifically about the issuer's JWT-based VCs. It includes information about supported algorithms, key IDs, and other details relevant to JWT-based VCs.

• URL: https://<your-keycloak-host>/realms/<your-realm>/.well-known/jwt-vc-issuer
• e.g: http://localhost:8080/realms/master/.well-known/jwt-vc-issuer

Creating User and User key Materials

Registering a User

The script 2.configure_user_4_account_client.sh allows the registration of a new Keycloak user. This user will be used for requesting VCs later in the process.

Creating User Key Material

Certain credential types require cryptographic binding to the user's identity. This is achieved by associating the VC with a key pair controlled by the user. The script 2.configure_user_4_account_client.sh also calls generate_user_key.sh to generate an ECDSA (Elliptic Curve Digital Signature Algorithm) key pair for this purpose. The user will use the private key to sign proofs during VC interactions, while the public key will be included in the VC.

Requesting Verifiable Credentials

For these examples, we will be using the pre-authorized_code flow.

• The script 3.retrieve_test_credential.sh will allow you to request and obtain a test_credential, without holder binding.
• The script 3.retrieve_IdentityCredential.sh with create a key pair for the wallet, sign a key proof and use it to request an IdentityCredential with key binding.