Skip to content

🐳⚡️ Run build scripts, and build + push images, w/ Docker Compose

License

Notifications You must be signed in to change notification settings

aleksclark/docker-compose-buildkite-plugin

 
 

Repository files navigation

Docker Compose Buildkite Plugin Build status

A Buildkite plugin that lets you build, run and push build steps using Docker Compose.

  • Containers are built, run and linked on demand using Docker Compose
  • Containers are namespaced to each build job, and cleaned up after use
  • Supports pre-building of images, allowing for fast parallel builds across distributed agents
  • Supports pushing tagged images to a repository

Example

The following pipeline will run test.sh inside a app service container using Docker Compose, the equivalent to running docker-compose run app test.sh:

steps:
  - command: test.sh
    plugins:
      - docker-compose#v4.11.0:
          run: app

⚠️ Warning: you should not use this plugin with an array of commands at the step level. Execute a script in your repository, a single command separated by ; or the plugin's command option instead.

You can also specify a custom Docker Compose config file and what environment to pass through if you need:

steps:
  - command: test.sh
    plugins:
      - docker-compose#v4.11.0:
          run: app
          config: docker-compose.tests.yml
          env:
            - BUILDKITE_BUILD_NUMBER

or multiple config files:

steps:
  - command: test.sh
    plugins:
      - docker-compose#v4.11.0:
          run: app
          config:
            - docker-compose.yml
            - docker-compose.test.yml

You can also specify the Docker Compose config file with $COMPOSE_FILE:

env:
  COMPOSE_FILE: docker-compose.yml
steps:
  - command: test.sh
    plugins:
      - docker-compose#v4.11.0:
          run: app

If you want to control how your command is passed to docker-compose, you can use the command parameter on the plugin directly:

steps:
  - plugins:
      - docker-compose#v4.11.0:
          run: app
          command: ["custom", "command", "values"]

Authenticated registries

You can leverage the docker-login plugin in tandem for authenticating with a registry. For example, the following will build and push an image to a private repo, and pull from that private repo in subsequent run commands:

steps:
  - plugins:
      - docker-login#v2.0.1:
          username: xyz
      - docker-compose#v4.11.0:
          build: app
          image-repository: index.docker.io/myorg/myrepo
  - wait
  - command: test.sh
    plugins:
      - docker-login#v2.0.1:
          username: xyz
      - docker-compose#v4.11.0:
          run: app

Note, you will need to add the configuration to all steps in which you use this plugin.

Artifacts

If you’re generating artifacts in the build step, you’ll need to ensure your Docker Compose configuration volume mounts the host machine directory into the container where those artifacts are created.

For example, if you had the following step:

steps:
  - command: generate-dist.sh
    artifact_paths: "dist/*"
    plugins:
      - docker-compose#v4.11.0:
          run: app

Assuming your application’s directory inside the container was /app, you would need to ensure your app service in your Docker Compose config has the following host volume mount:

volumes:
  - "./dist:/app/dist"

You can also use the volumes plugin option to add or override a volume, for example:

steps:
  - command: generate-dist.sh
    artifact_paths: "dist/*"
    plugins:
      - docker-compose#v4.11.0:
          run: app
          volumes:
            - "./dist:/app/dist"

If you want to use environment variables in the volumes element, you will need to activate the (unsafe) option expand-volume-vars (and most likely escape it using $$VARIABLE_NAME).

Environment

By default, docker-compose makes whatever environment variables it gets available for interpolation of docker-compose.yml, but it doesn't pass them in to your containers.

You can use the environment key in docker-compose.yml to either set specific environment vars or "pass through" environment variables from outside docker-compose.

Specific values

If you want to add extra environment above what is declared in your docker-compose.yml, this plugin offers a environment block of its own:

steps:
  - command: generate-dist.sh
    plugins:
      - docker-compose#v4.11.0:
          run: app
          env:
            - BUILDKITE_BUILD_NUMBER
            - BUILDKITE_PULL_REQUEST
            - MY_CUSTOM_ENV=llamas

Note how the values in the list can either be just a key (so the value is sourced from the environment) or a KEY=VALUE pair.

Pipeline variables

Alternatively, you can have the plugin add all environment variables defined for the job by the agent as defined in BUILDKITE_ENV_FILE activating the propagate-environment option:

steps:
  - command: use-vars.sh
    plugins:
      - docker-compose#v4.11.0:
          run: app
          propagate-environment: true

Container Labels

When running a command, the plugin will automatically add the following Docker labels to the container specified in the run option:

  • com.buildkite.pipeline_name=${BUILDKITE_PIPELINE_NAME}
  • com.buildkite.pipeline_slug=${BUILDKITE_PIPELINE_SLUG}
  • com.buildkite.build_number=${BUILDKITE_BUILD_NUMBER}
  • com.buildkite.job_id=${BUILDKITE_JOB_ID}
  • com.buildkite.job_label=${BUILDKITE_LABEL}
  • com.buildkite.step_key=${BUILDKITE_STEP_KEY}
  • com.buildkite.agent_name=${BUILDKITE_AGENT_NAME}
  • com.buildkite.agent_id=${BUILDKITE_AGENT_ID}

These labels can make it easier to query containers on hosts using docker ps for example:

docker ps --filter "label=com.buildkite.job_label=Run tests"

This behaviour can be disabled with the run-labels: false option.

Build Arguments

You can use the build args key in docker-compose.yml to set specific build arguments when building an image.

Alternatively, if you want to set build arguments when pre-building an image, this plugin offers an args block of its own:

steps:
  - command: generate-dist.sh
    plugins:
      - docker-compose#v4.11.0:
          build: app
          image-repository: index.docker.io/myorg/myrepo
          args:
            - MY_CUSTOM_ARG=panda

Note that the values in the list must be a KEY=VALUE pair.

Pre-building the image

If you have multiple steps that use the same service/image (such as steps that run in parallel), you can use this plugin in a specific build step to your pipeline. That will set specific metadata in the pipeline for this plugin to use in run steps afterwards:

steps:
  - label: ":docker: Build"
    plugins:
      - docker-compose#v4.11.0:
          build: app
          image-repository: index.docker.io/myorg/myrepo

  - wait

  - label: ":docker: Test %n"
    command: test.sh
    parallelism: 25
    plugins:
      - docker-compose#v4.11.0:
          run: app

All run steps for the service app will automatically pull and use the pre-built image. Without this, each Test %n job would build its own instead.

Building multiple images

Sometimes your compose file has multiple services that need building. The example below will build images for the app and tests service and then the run step will pull them down and use them for the run as needed.

steps:
  - label: ":docker: Build"
    agents:
      queue: docker-builder
    plugins:
      - docker-compose#v4.11.0:
          build:
            - app
            - tests
          image-repository: index.docker.io/myorg/myrepo

  - wait

  - label: ":docker: Test %n"
    command: test.sh
    parallelism: 25
    plugins:
      - docker-compose#v4.11.0:
          run: tests

Pushing Tagged Images

If you want to push your Docker images ready for deployment, you can use the push configuration (which operates similar to docker-compose push:

steps:
  - label: ":docker: Push"
    plugins:
      - docker-compose#v4.11.0:
          push: app

To push multiple images, you can use a list:

steps:
  - label: ":docker: Push"
    plugins:
      - docker-compose#v4.11.0:
          push:
            - first-service
            - second-service

If you want to push to a specific location (that's not defined as the image in your docker-compose.yml), you can use the {service}:{repo}:{tag} format, for example:

steps:
  - label: ":docker: Push"
    plugins:
      - docker-compose#v4.11.0:
          push:
            - app:index.docker.io/myorg/myrepo/myapp
            - app:index.docker.io/myorg/myrepo/myapp:latest

Reusing caches from images

A newly spawned agent won't contain any of the docker caches for the first run which will result in a long build step. To mitigate this you can reuse caches from a previously built image (if it was pushed from a previous build):

steps:
  - label: ":docker: Build an image"
    plugins:
      - docker-compose#v4.11.0:
          build: app
          image-repository: index.docker.io/myorg/myrepo
          cache-from: app:index.docker.io/myorg/myrepo/myapp:latest
  - wait
  - label: ":docker: Push to final repository"
    plugins:
      - docker-compose#v4.11.0:
          push:
            - app:index.docker.io/myorg/myrepo/myapp
            - app:index.docker.io/myorg/myrepo/myapp:latest

Important: if your registry URL contains a port, you will need to take the following into account:

  • specify the separator-cache-from option to change the colon character to something else (like #)
  • you will have to specify tags in the push elements (or the plugin will try to validate everything after the port as a tag)

Multiple cache-from values

This plugin allows for the value of cache-from to be a string or a list. If it's a list, as below, then the first successfully pulled image will be used.

steps:
  - label: ":docker Build an image"
    plugins:
      - docker-compose#v4.11.0:
          build: app
          image-repository: index.docker.io/myorg/myrepo
          separator-cache-from: "#"
          cache-from:
            - "app#myregistry:port/myrepo/myapp#my-branch"
            - "app#myregistry:port/myrepo/myapp#latest"
  - wait
  - label: ":docker: Push to final repository"
    plugins:
      - docker-compose#v4.11.0:
          push:
            - app:myregistry:port/myrepo/myapp:my-branch
            - app:myregistry:port/myrepo/myapp:latest

You may actually want to build your image with multiple cache-from values, for instance, with the cached images of multiple stages in a multi-stage build. Adding a grouping tag to the end of a cache-from list item allows this plugin to differentiate between groups within which only the first successfully downloaded image should be used (those elements that don't have a group specified will make a separate :default: group of its own). This way, not all images need to be downloaded and used as cache, not just the first.

steps:
  - label: ":docker: Build Intermediate Image"
    plugins:
      - docker-compose#v4.11.0:
          build: myservice_intermediate  # docker-compose.yml is the same as myservice but has `target: intermediate`
          image-name: buildkite-build-${BUILDKITE_BUILD_NUMBER}
          image-repository: index.docker.io/myorg/myrepo/myservice_intermediate
          cache-from:
            - myservice_intermediate:index.docker.io/myorg/myrepo/myservice_intermediate:${BUILDKITE_BRANCH}
            - myservice_intermediate:index.docker.io/myorg/myrepo/myservice_intermediate:latest
  - wait
  - label: ":docker: Build Final Image"
    plugins:
      - docker-compose#v4.11.0:
          build: myservice
          image-name: buildkite-build-${BUILDKITE_BUILD_NUMBER}
          image-repository: index.docker.io/myorg/myrepo
          cache-from:
            - myservice:index.docker.io/myorg/myrepo/myservice_intermediate:buildkite-build-${BUILDKITE_BUILD_NUMBER}:intermediate  # built in step above
            - myservice:index.docker.io/myorg/myrepo/myservice:${BUILDKITE_BRANCH}
            - myservice:index.docker.io/myorg/myrepo/myservice:latest

In the example above, the myservice_intermediate:buildkite-build-${BUILDKITE_BUILD_NUMBER} is one group named "intermediate", and myservice:${BUILDKITE_BRANCH} and myservice:latest are another (with a default name). The first successfully downloaded image in each group will be used as a cache.

Configuration

Main Commands

You will need to specify at least one of the following to use this extension.

build

The name of a service to build and store, allowing following pipeline steps to run faster as they won't need to build the image. The step's command will be ignored and does not need to be specified.

Either a single service or multiple services can be provided as an array.

run

The name of the service the command should be run within. If the docker-compose command would usually be docker-compose run app test.sh then the value would be app.

push

A list of services to push in the format service:image:tag. If an image has been pre-built with the build step, that image will be re-tagged, otherwise docker-compose's built-in push operation will be used.

Known issues

Run & Push

A basic pipeline similar to the following:

steps:
  - label: ":docker: Run & Push"
    plugins:
      - docker-compose#v4.11.0:
          run: myservice
          push: myservice

Will cause the image to be built twice (once before running and once before pushing) unless there was a previous build step that set the appropriate metadata.

Run & Push

A basic pipeline similar to the following:

steps:
  - label: ":docker: Build & Push"
    plugins:
      - docker-compose#v4.11.0:
          build: myservice
          push: myservice

Will cause the image to be pushed twice (once by the build step and another by the push step)

pull (optional, run only)

Pull down multiple pre-built images. By default only the service that is being run will be pulled down, but this allows multiple images to be specified to handle prebuilt dependent images. Note that pulling will be skipped if the skip-pull option is activated.

config (optional)

The file name of the Docker Compose configuration file to use. Can also be a list of filenames. If $COMPOSE_FILE is set, it will be used if config is not specified.

Default: docker-compose.yml

image-repository (optional, build only)

The repository for pushing and pulling pre-built images, same as the repository location you would use for a docker push, for example "index.docker.io/myorg/myrepo". Each image is tagged to the specific build so you can safely share the same image repository for any number of projects and builds.

The default is "" which only builds images on the local Docker host doing the build.

This option can also be configured on the agent machine using the environment variable BUILDKITE_PLUGIN_DOCKER_COMPOSE_IMAGE_REPOSITORY.

image-name (optional, build only)

The name to use when tagging pre-built images. If multiple images are built in the build phase, you must provide an array of image names.

build-alias (optional, build only)

Other docker-compose services that should be aliased to the main service that was built. This is for when different docker-compose services share the same prebuilt image.

args (optional, build and run only)

A list of KEY=VALUE that are passed through as build arguments when image is being built.

env or environment (optional, run only)

A list of either KEY or KEY=VALUE that are passed through as environment variables to the container.

propagate-environment (optional, boolean)

Whether or not to automatically propagate all pipeline environment variables into the run container. Avoiding the need to be specified with environment.

Important: only pipeline variables will automatically be propagated (what you see in the Buildkite UI). Variables set in proceeding hook scripts will not be propagated to the container.

command (optional, run only, array)

Sets the command for the Docker image, and defaults the shell option to false. Useful if the Docker image has an entrypoint, or doesn't contain a shell.

This option can't be used if your step already has a top-level, non-plugin command option present.

Examples: [ "/bin/mycommand", "-c", "test" ], ["arg1", "arg2"]

shell (optional, run only, array or boolean)

Set the shell to use for the command. Set it to false to pass the command directly to the docker-compose run command. The default is ["/bin/sh", "-e", "-c"] unless you have provided a command.

Example: [ "powershell", "-Command" ]

skip-checkout (optional, run only)

Whether to skip the repository checkout phase. This is useful for steps that use a pre-built image and will fail if there is no pre-built image.

Important: as the code repository will not be available in the step, you need to ensure that the docker compose file(s) are present in some way (like using artifacts)

skip-pull (optional, run only)

Completely avoid running any pull command. Images being used will need to be present in the machine from before or have been built in the same step. Could be useful to avoid hitting rate limits when you can be sure the operation is unnecessary. Note that it is possible other commands run in the plugin's lifecycle will trigger a pull of necessary images.

workdir (optional, run only)

Specify the container working directory via docker-compose run --workdir. This option is also used by mount-checkout if it doesn't specify where to mount the checkout in the container.

Example: /app

user (optional, run only)

Run as specified username or uid via docker-compose run --user.

propagate-uid-gid (optional, run-only, boolean)

Whether to match the user ID and group ID for the container user to the user ID and group ID for the host user. It is similar to specifying user: 1000:1000, except it avoids hardcoding a particular user/group ID.

Using this option ensures that any files created on shared mounts from within the container will be accessible to the host user. It is otherwise common to accidentally create root-owned files that Buildkite will be unable to remove, since containers by default run as the root user.

mount-ssh-agent (optional, run-only, boolean or string)

Whether to mount the ssh-agent socket (at /ssh-agent) from the host agent machine into the container or not. Instead of just true or false, you can specify absolute path in the container for the home directory of the user used to run on which the agent's .ssh/known_hosts will be mounted (by default, /root).

Default: false

mount-buildkite-agent (optional, run-only, boolean)

Whether to automatically mount the buildkite-agent binary and associated environment variables from the host agent machine into the container.

Default: false

mount-checkout (optional, run-only, string or boolean)

The absolute path where to mount the current working directory which contains your checked out codebase.

If set to true it will mount onto /workdir, unless workdir is set, in which case that will be used.

Default: false

pull-retries (optional)

A number of times to retry failed docker pull. Defaults to 0.

This option can also be configured on the agent machine using the environment variable BUILDKITE_PLUGIN_DOCKER_COMPOSE_PULL_RETRIES.

push-retries (optional)

A number of times to retry failed docker push. Defaults to 0.

This option can also be configured on the agent machine using the environment variable BUILDKITE_PLUGIN_DOCKER_COMPOSE_PUSH_RETRIES.

cache-from (optional, build only)

A list of images to pull caches from in the format service:index.docker.io/myorg/myrepo/myapp:tag before building, ignoring any failures. If multiple images are listed for a service, the first one to successfully pull will be used. Requires docker-compose file version 3.2+.

separator-cache-from (optional, build only, single character)

A single character that specifies the character to use for splitting elements in the cache-from option.

By default it is : which should not be a problem unless your registry's URL contains a port, in which case you will have to use this option to specify a different character.

Important: the tag to use is its own field, so you will have to specify elements like service#registry:port/myrepo/myapp#tag#group

target (optional, build only)

Allow for intermediate builds with --target VALUE options.

Note that there is a single build command run for all services so the target value will apply to all of them.

volumes (optional, run only)

A list of volumes to mount into the container. If a matching volume exists in the Docker Compose config file, this option will override that definition.

Additionally, volumes may be specified via the agent environment variable BUILDKITE_DOCKER_DEFAULT_VOLUMES, a ; (semicolon) delimited list of mounts in the -v syntax. (Ex. buildkite:/buildkite;./app:/app).

expand-volume-vars (optional, boolean, run only, unsafe)

When set to true, it will activate interpolation of variables in the elements of the volumes configuration array. When turned off (the default), attempting to use variables will fail as the literal $VARIABLE_NAME string will be passed to the -v option.

⚠️ Important: this is considered an unsafe option as the most compatible way to achieve this is to run the strings through eval which could lead to arbitrary code execution or information leaking if you don't have complete control of the pipeline

Note that rules regarding environment variable interpolation apply here. That means that $VARIABLE_NAME is resolved at pipeline upload time, whereas $$VARIABLE_NAME will be at run time. All things being equal, you likely want to use $$VARIABLE_NAME on the variables mentioned in this option.

graceful-shutdown (optional, run only)

Gracefully shuts down all containers via 'docker-compose stop`.

The default is false.

leave-volumes (optional, run only)

Prevent the removal of volumes after the command has been run.

The default is false.

no-cache (optional, build and run only)

Build with --no-cache, causing Docker Compose to not use any caches when building the image.

The default is false.

build-parallel (optional, build and run only)

Build with --parallel, causing Docker Compose to run builds in parallel. Requires docker-compose 1.23+.

The default is false.

tty (optional, run only)

If set to false, doesn't allocate a TTY. This is useful in some situations where TTY's aren't supported, for instance windows.

The default is true on unix, false on windows

dependencies (optional, run only)

If set to false, runs with --no-deps and doesn't start linked services.

The default is true.

pre-run-dependencies (optional, run only)

If dependencies are activated (which is the default), you can skip starting them up before the main container by setting this option to false. This is useful if you want compose to take care of that on its own at the expense of messier output in the run step.

wait (optional, run only)

Whether to wait for dependencies to be up (and healthy if possible) when starting them up. It translates to using [--wait in the docker-compose up] command.

Defaults to false.

ansi (optional, run only)

If set to false, disables the ansi output from containers.

The default is true.

use-aliases (optional, run only)

If set to true, docker compose will use the service's network aliases in the network(s) the container connects to.

The default is false.

verbose (optional)

Sets docker-compose to run with --verbose

The default is false.

rm (optional, run only)

If set to true, docker compose will remove the primary container after run. Equivalent to --rm in docker-compose.

The default is true.

run-labels (optional, run only)

If set to true, adds useful Docker labels to the primary container. See Container Labels for more info.

The default is true.

compatibility (optional, run only)

If set to true, all docker compose commands will rum with compatibility mode. Equivalent to --compatibility in docker-compose.

The default is false.

Note that the effect of this option changes depending on your docker compose CLI version:

entrypoint (optional, run only)

Sets the --entrypoint argument when running docker-compose.

service-ports (optional, run only)

If set to true, docker compose will run with the service ports enabled and mapped to the host. Equivalent to --service-ports in docker-compose.

The default is false.

upload-container-logs (optional, run only)

Select when to upload container logs.

  • on-error Upload logs for all containers when an error occurs
  • always Always upload logs for all container
  • never Never upload logs for all container

The default is on-error.

cli-version (optional, string or integer)

If set to 2, plugin will use docker compose to execute commands; otherwise it will default to version 1, using docker-compose instead.

buildkit (optional, build only, boolean)

Assuming you have a compatible docker installation and configuration in the agent, activating this option would setup the environment for the docker-compose build call to use BuildKit. Note that if you are using cli-version 2, you are already using buildkit by default.

You may want to also add BUILDKIT_INLINE_CACHE=1 to your build arguments (args option in this plugin), but know that there are known issues with it.

ssh (optional, build only, boolean)

When enabled, it will add the --ssh option to the build command. Note that it assumes you have a compatible docker installation and configuration in the agent (meaning you are using BuildKit and it is correctly setup).

secrets (optional, build only, array of strings)

All elements in this array will be passed literally to the build command as parameters of the --secrets option. Note that you must have BuildKit enabled for this option to have any effect and special RUN stanzas in your Dockerfile to actually make use of them.

Developing

To run the tests:

docker-compose run --rm tests bats tests tests/v2

License

MIT (see LICENSE)

About

🐳⚡️ Run build scripts, and build + push images, w/ Docker Compose

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Shell 100.0%