building a pcb for openffb and vesc
This is a temporary pcb for using OpenFFB and VESC using as few cables as possible
Feel free to modify and improve the pcb as you prefer
inside PCB folder there are the files for EasyEDA buildings
- in the upper left part you have the Resistor zone
- in the upper right part you can solder the STM32F407 board
- in the bottom of the pcb you can connect the VESC 4.20
- in the bottom of the pcb you can connect the MT3608 (booster)
- the USB port is connected to PC11 (-) and PC12 (+) pins
- in the upper part added a db15 port to connect Biss-C encoder wires
- in the upper part added a RS422 Max490 to connect the encoder with VESC
- .....add what you want
