This software implements a framework to encode structural brain connectomes into multidimensional arrays. These arrays are commonly referred to as tensors. Encoding Connectomes provides an agile framework for computing over connectome edges and nodes efficiently. We provide several examples of operations that can be performed using the framework.
One major application of the tensor encoding is the implementation of the Linear Fascicle Evaluation method, in short LiFE. The tensor encoding method allows implementing LiFE with a dramatic reduction in storage requirements, up to 40x compression factors. Furthermore, connectome encoding allows performing multiple computational neuroanatomy operations such as tract-dissections, virtual lesions, and connectivity estimates very efficiently using machine-friendly array operators.
We provide demos to explain how to: (1) Load and encode diffusion-weighted data and tractography models of white matter fascicles, as well as perform multidimensional arrays operations. (2) Build and optimize a Linear Fascicle Evaluation model. (3) Perform neuroanatomical segmentation, computational neuroanatomy operations, and virtual lesions using the connectome encoding framework. (4) Reproduce some of the figures of an article describing the method implemented in this toolbox: Caiafa, C.F., Pestilli, F. Multidimensional encoding of brain connectomes. Sci Rep 7, 11491 (2017). https://doi.org/10.1038/s41598-017-09250-w
- Encoding of brain conenctome and associated phenotypes into multidimensional arrays.
- Evaluate the evidence supporting white-matter connectomes generated using magnetic resonance diffusion-weighted imaging and computational tractography .
- Perform statistical inference on white-matter connectomes: Compare white-matter connectomes, show the evidence for white-matter tracts and connections between brain areas.
Copyright (2017), Cesar Caiafa, [email protected] and Franco Pestilli, [email protected]
- Download (https://github.com/brain-life/encode).
- Start MatLab.
- Add repository to the matlab search path.
- Download the Encode repository from the TAR/ZIP files linked here.
- UNZIP/UNTAR the file.
- Add the encode folder to your matlab search path. To do so in the MatLab prompt type:
>> addpath(genpath('/my/path/to/the/encode/folder/'))
- Download the VISTASOFT repository from the TAR/ZIP files linked here.
- UNZIP/UNTAR the file.
- Add the VISTASOFT folder to your matlab search path. To do so in the MatLab prompt type:
>> addpath(genpath('/my/path/to/the/VISTASOFT/folder/'))
- Download the MBA repository from the TAR/ZIP files linked here.
- UNZIP/UNTAR the file.
- Add the MBA folder to your matlab search path. To do so in the MatLab prompt type:
>> addpath(genpath('/my/path/to/the/MBA/folder/'))
- Download the demo datasets from the repository doi:10.5967/K8X63JTX.
- UNTAR the main file Demo_Data_for_Multidimensional_Encoding_of_Brain_Connectomes.tar.gz
- Go inside the folder Demo_Data_for_Multidimensional_Encoding_of_Brain_Connectomes/ and UNZIP the following files: Figs_data.zip, HCP3T.zip, HCP7T, and STN. You can deleted the original .zip files once they are unziped.
- The structures of files and foldes under the main folder should looks like as follows
- feDemoDataPath.m
- Figs_data/
- HCP3T/
- HCP7T/
- README.txt
- STN/
- Add the main data folder (Demo_Data_for_Multidimensional_Encoding_of_Brain_Connectomes/) to your matlab search path. To do so in the MatLab prompt type:
>> addpath(genpath('/my/path/to/the/Demo_Data_for_Multidimensional_Encoding_of_Brain_Connectomes/'))
Here you will learn about creating the tensor representation of a connectoms and perform basic operations such as identifying fascicles having a particular spatial orientation in a small voxel area.
>> demo_connectome_encoding.m
This code reproduce Fig. 3 of the paper "Multidimensional encoding of brain connectomes", by C. Caiafa and F. Pestilli.
>> demo_connectome_data_comparison.m
This code allows you to compute virtual lesions on a particular brain dataset and visualize particular major tracts together with their path-neighborhood, i.e. fascicles sharing same voxels.
>> demo_virtual_lesion.m
This code allows you to compute compute the fascicles weights for two different tractography methods, probabilistic and deterministic tractographies, on a same brain. This is similar to the original LiFE demo in https://github.com/francopestilli/life but here a full brain dataset is used. The optimization (fitting fascicles weights) runs in about 3 hours on a modern Intel processor with 8GB of RAM. This code has been tested with MatLab 2015b on Ubuntu 15+ and Mac OSX 10.11.
>> demo_LiFE.m
• fe.name: [text], customized name of the structure.
• fe.type: [text], type description.
• fe.life: [1 × 1 struct], results of the LiFE method, see fe.life fields description below.
• fe.fg: [1 × 1 struct], input fiber group (connectome) information, see fe.fg fields description below.
• fe.roi: [1 × 1 struct], input fiber group (connectome) information, see fe.roi fields description below.
• fe.path: [1 × 1 struct], paths to input data (connectome, dMRI data, etc.).
• fe.rep: [1×1 struct], dMRI data for a repeated measurement if available.
• fe.life.M.Phi: [Na × Nv × Nf sptensor], sparse array Φ encoding the connectome.
• fe.life.M.Nphi: Discretization number in azimuth, default = 360.
• fe.life.M.Ntheta: Discretization number in elevation, default = 360.
• fe.life.M.orient: [3 × Na double], matrix containing in its columns the orientations for each Dictionary element.
• fe.life.M.DictSig: [Nθ × Na double], Dictionary matrix containing in its columns the canonical diffusion kernel (demeaned) at different orienta- tions.
• fe.life.xform.img2acpc: [4 × 4 double], Image to ACPC affine trans- form.
• fe.life.xform.acpc2img: [4 × 4 double], ACPC to image affine trans- form.
• fe.life.fibers: not used.
• fe.life.diffusion_signal_img: [Nv × Nθ double], dMRI data.
• fe.life.diffusion_S0_img: [Nv × 10 double], diffusion signal measured at b = 0 (ten times). Usually, we compute S0(v) by averaging over the ten available values.
• fe.life.bvecs: [Nθ × 3 double], each row indicates the gradient 3D di- rection.
• fe.life.bvals: [Nθ × 1 double], each row indicates the used b-value for each gradient.
• fe.life.bvecsindices: [Nθ × 1 int], indices for measurements with non- zero b-value.
• fe.life.imagedim: [Nx , Ny , Nz , Nm ], size of the input 4D dMRI dataset where (Nx,Ny,Nz) are the the sizes in each coordinate, x, y and z, respec- tivelly; and Nm correspond to the number of measurements with b = 0 and b ̸= 0.
• fe.life.voxel2FNpair: not used.
• fe.life.modelTensor: [λ1 , λ2 , λ3 ], parameters of the Diffusion Tensor (DT) model used to generate the Dictionary of diffusion kernels.
• fe.life.fit: this field contains the results of applying the LiFE method, see description below.
• fe.life.fit.randState: saved by the optimization algorithm.
• fe.life.fit.results: saved by the optimization algorithm.
• fe.life.fit.weights: [Nf × 1 double], fascicles weights obtained as a result of the optimization.
• fe.life.fit.params.fitMethod: [text], name of used optimization method, default is “bbnls”.
• fe.fg.name: [text], name of Fiber Group (connectome).
• fe.fg.colorRgb: [R, G, B], color specification for visualization.
• fe.fg.thickness: [double], thickness specificattion for visualization.
• fe.fg.visible: [binary], parameter for visualization.
• fe.fg.seeds: Seeds used by MRTRIX software to generate the connectome.
• fe.fg.seedRadius: MRTRIX parameter.
• fe.fg.seedVoxelOffsets: MRTRIX parameter.
• fe.fg.params: additional MRTRIX parameters.
• fe.fg.fibers: {Nf ×1 cell}, set of fascicles (streamlines), generated with a tractography algorithm. Each cell contains the x,y,z coordinates a list of 3D points describing the trajectory of a single fascicle.
• fe.roi.name: [text], name of ROI.
• fe.roi.color: [R, G, B], color specification for visualization.
• fe.roi.coords: [Nv ×3 double], voxel coordinates, each row specifies the spatial location of a single voxel.
• fe.roi.visible: [binary], parameter for visualization.
• fe.roi.mesh: not used.
• fe.roi.dirty: parameter for visualization
• fe.roi.query_id: not used.
This software is currently compatible with Matlab 2020b or higher and only with Mac OSX and Linux (Ubuntu/Fedora).