Version: 2.0.2
Date: Oct 2024
CLEO PS2 is a version of the top-most popular GTA PC version add-on - CLEO library, which enhances game's script engine with ability to load custom scripts. Use cheats, spawn cars and use lots of cool features.
You are using this application at your own risk, you agree to take full responsibility for anything that this application can cause. You are not allowed to install the application or any of the application components if you don't agree with these terms.
- the library has been ported to PS2, supports both LCS and VCS
- Menu opening behavior is changed, press [start] to open the main menu, press [start] again to open cleo menu, press [circle] to close main menu without opening cleo menu.
- Popup information is hidden, to allow vanilla game experience
- Download and extract PCSX2 Fork With Plugins.
- Download and extract plugin archive to the root directory, where exe is located.
- Launch the game.
- LCS SLUS-21423 / SLES-54135 (crc: 4F32A11F / B3AD1EA4)
- VCS SLUS-21590 / SLES-54622 (crc: 7EA439F5 / D693D4CF)
CLEO PS2 is using *.csa and *.csi script extensions, *.csa scripts start just after the game loads and *.csi ones only when you directly invoke them via ingame script menu. To open the menu perform a slide from screen top to bottom thru center, arrow popup at start should give a tip, this one is related to the mobile game series only. In order to open the menu on PS2, press [start], and then [start] again, and you will see cleo menu.
In order to install scripts manually, put scripts in PCSX2F/PLUGINS/cleo/%game% where the %game% is either "lcs" or "vcs".
A lot of PC CLEO *.cs scripts must be manually rewritten before they can be used with CLEO PS2 since *.cs scripts use PC opcodes and PC oriented controls. CLEO PS2 is using *.csa and *.csi script extensions, which internally are the same as PC *.cs scripts, while *.csa scripts start when the game loads and *.csi when user directly invokes a script using the menu.
The name which appears in the menu is a decorated version of an original script file name - game prefix gets cleaned out (e.g. "gtasa."), extension is removed too (".csi"), dots and underlines get replaced with spaces. For instance "gtasa.car_spawner.csi" will appear in the menu as "car spawner".
You can compile and decompile CLEO PS2 scripts with Sanny Builder, in order to do so add the list of CLEO PS2 opcode declarations in the corresponding SCM.INI file:
; CLEO ANDROID (PSP)
0DD0=2,%1d% = get_label_addr %2p%
0DD1=2,%1d% = get_func_addr_by_cstr_name %2d%
0DD2=1,context_call_func %1d% ; deprecated, use 0DDE instead
0DD3=2,context_set_reg %1d% value %2d% ; deprecated, use 0DDE instead
0DD4=2,%1d% = context_get_reg %2d% ; deprecated, use 0DDE instead
0DD5=1,%1d% = get_platform
0DD6=1,%1d% = get_game_version
0DD7=1,%1d% = get_image_base
0DD8=4,%1d% = read_mem_addr %2d% size %3d% add_ib %4d%
0DD9=5,write_mem_addr %1d% value %2d% size %3d% add_ib %4d% protect %5d%
0DDA=3,%1d% = get_pattern_addr_cstr %2d% index %3d%
0DDB=3,get_game_ver_ex name_hash %1d% ver_hash %2d% ver_code %3d%
0DDC=2,set_mutex_var %1d% to %2d%
0DDD=2,%1d% = get_mutex_var %2d%
0DDE=-1, call_func %1d% add_ib %2d%
0DE0=3,%1d% = get_touch_point_state %2d% mintime %3d%
0DE1=5,%1d% = get_touch_slide_state from %2d% to %3d% mintime %4d% maxtime %5d%
0DE2=1,%1d% = get_menu_button_state
0DE3=2,%1d% = get_menu_button_pressed mintime %2d%
0DE4=2,%1d% = psp_get_control_state %2d%
0DE5=3,%1d% = psp_get_control_pressed %2d% mintime %3d%
0DF2=2,create_menu %1d% items %2d%
0DF3=0,delete_menu
0DF4=2,%1d% = get_menu_touched_item_index maxtime %2d%
0DF5=1,set_menu_active_item_index %1d%
0DF6=1,%1d% = get_menu_active_item_index
1000=-1, opcode_func
Example scripts compilation for LCS/VCS requires basic keyword definitions, if your current version of SB doesn't have these already defined then you have to define and add keywords.txt files manually:
- Open SB/data/modes.xml
- Find the mode with id="sa" and see how are defined there
- Now find the mode with id="lcs"
- Define the keywords as @sb:\data\lcs\keywords.txt
- Do the same for id="vcs_psp" using @sb:\data\vcs\keywords.txt
- Create required keywords.txt files and put the respective definitions there
; keywords.txt for lcs
0001=wait
0002=goto
0002=jump
004d=jf
004e=end_thread
0050=gosub
0051=return
00db=if
03a9=thread
; keywords.txt for vcs
0001=wait
0002=goto
0002=jump
0022=jf
0023=end_thread
0025=gosub
0026=return
0078=if
0238=thread
0DD0=2,%1d% = get_label_addr %2p%
0DD1=2,%1d% = get_func_addr_by_cstr_name %2d%
These two are usually used together, first one gets real address of the target label where string or anything else is written and the second gets exported symbol name in the game's main library by C-style string name. It was done in the way like this (not using long strings) in order for opcode to be universal and also work with games which do not support long string type. When used with PS2 game series 0DD1 will return 0.
0DD2=1,context_call_func %1d%
0DD3=2,context_set_reg %1d% value %2d%
0DD4=2,%1d% = context_get_reg %2d%
Deprecated, use 0DDE instead.
0DD5=1,%1d% = get_platform
Returns current platform: Android = 1, PS2 = 2, primarely used for LCS scripts.
0DD6=1,%1d% = get_game_version
Returns internal game version, see sdk -> cleo.h -> eGameVerInternal for the details.
0DD7=1,%1d% = get_image_base
Returns image base of the main game library.
0DD8=4,%1d% = read_mem_addr %2d% size %3d% add_ib %4d%
0DD9=5,write_mem_addr %1d% value %2d% size %3d% add_ib %4d% protect %5d%
Reads and writes memory, add_ib should be set only when raw address specified and it needs to be added to the imagebase in order to access needed memory location.
0DDA=3,%1d% = get_pattern_addr_cstr %2d% index %3d%
Searches for the specified byte pattern in main library, if there are few addresses which match this pattern the index is used, see example scripts for the details. Works on both Android and PS2, the search if performed within all executable sections. Max length for the pattern is 32 bytes. Returns 0 if no pattern was found. The thing to keep in mind while using this on PS2 - if you are searching for a function start bytes you have to mark first 4 as ?? since PPSSPP can override this for JIT purporses.
0DDB=3,get_game_ver_ex name_hash %1d% ver_hash %2d% ver_code %3d%
Returns current game version:
- name_hash is a jenkins hash of an Android package name, on PS2 not a hash while an integer part of a title id
- ver_hash is always a jenkins hash of version string, both platforms have this thing
- ver_code is a package version code on Android, on PS2 this is a WORD where lower byte is a minor version and higher is a major version of a title.
0DDC=2,set_mutex_var %1d% to %2d%
0DDD=2,%1d% = get_mutex_var %2d%
Mutex vars are being used as global variables between scripts, mutex id can be any integer value, for example all scripts that use GUI use mutex variable with id 0 which indicates the state of anything being onscreen, if it's value is 0 then script can show GUI, if script is about to show GUI then it sets this var to 1. If mutex variable isn't set then 0 is returned.
0DDE=-1, call_func %1d% add_ib %2d%
Calls a game function using specified address, if add_ib is set to 1 then adds an imagebase. Pairs of ['type', value] follow and indicate with which result type and params this function must be called. Specifying result is optional, just as specifing params if function has none. Type can be one of these: 'i' - integer param 'f' - float param 'ref' - passes a reference to a variable as param 'resi' - result of integer type 'resf' - result of float type Let's look how this one works on a simple example: 0DDE: call_func 2@ add_ib 0 __result 'resi' 0@ __pad_index 'i' 0 Here we are performing a call to a function which absolute address is stored in 2@, this is why we don't need to add an imagebase here, so add_ib is set to 0, this function returns integer which get's stored in 0@ and takes one integer param which is set to 0, can be a variable instead if required.
0DE0=3,%1d% = get_touch_point_state %2d% mintime %3d%
0DE1=5,%1d% = get_touch_slide_state from %2d% to %3d% mintime %4d% maxtime %5d%
Returns result of the requested touch action check, can be 0 or 1. On PS2 always returns 0. Touch points is the CLEO PS2 engine implemented touch detection system which divides touchscreen into 9 parts called touch points, they can be used to detect timed slides and touches.
Touch point ids:
#1 LEFT-TOP #4 CENTER-TOP #7 RIGHT-TOP
#2 LEFT-CENTER #5 CENTER #8 RIGHT-CENTER
#3 LEFT-BOTTOM #6 CENTER-BOTTOM #9 RIGHT-BOTTOM
0DE2=1,%1d% = get_menu_button_state
0DE3=2,%1d% = get_menu_button_pressed mintime %2d%
Returns state of the Android hardware menu button, can be 0 or 1, a lot of devices have no button like this. On PS2 always returns 0.
0DE4=2,%1d% = psp_get_control_state %2d%
0DE5=3,%1d% = psp_get_control_pressed %2d% mintime %3d%
Returns state of the PS2 control, can be 0 or 1. On Android always returns 0.
enum ePspControl {
SELECT = 0, UP, RIGHT, DOWN, LEFT, LTRIGGER, RTRIGGER,
TRIANGLE, CIRCLE, CROSS, SQUARE, HOLD,
STICK_UP, STICK_DOWN, STICK_RIGHT, STICK_LEFT
}
0DF2=2,create_menu %1d% items %2d%
Creates the menu gui which handles most of the things like drawing and input automatically. With first param being a label like @menu_desc where you describe the menu and second param indicating menu item count, can be set to a higher value than actual items if the menu has last item described as 00 byte. On Android the menu is touch based while on PS2 uses controls. To get the point see the example scripts. Menu flags go as following:
enum eMenuFlags
{
// item names are considered being gxt/fxt entries, if no such entry exists then
// item name is the name which will be displayed in the menu
USE_GXT = 1 << 0,
// if gxt/fxt entry won't fit the menu bounds then text will be end-trimmed,
// sizes: III, VC, SA = 20, LCS = 18, VCS = 19
TRIM_GXT = 1 << 1
}
0DF3=0,delete_menu
Removes active menu.
0DF4=2,%1d% = get_menu_touched_item_index maxtime %2d%
Returns 0-based menu touched item index if condition is met, on PS2 returns selected item index which is the same, if no item was touched or selected then the result is -1, if menu has to be closed then the result is -2.
0DF5=1,set_menu_active_item_index %1d%
0DF6=1,%1d% = get_menu_active_item_index
Gets and sets active menu index with scrolling menu pages if necessary, on Android this involves only menu pages while on PS2 also sets last active item on the corresponding page. Mostly used in order to pass menu states between different launches of the same *.csi script which uses a menu.