feat(kernel): probe ata disk

kernel/Makefile

@@ -29,6 +29,7 @@ SRCS	= kernel.asm \
 			dev/at/kbd.inc \
 			dev/at/com.inc \
 			dev/at/ne2k.inc \
+			dev/at/ata.inc \
 			dev/at/floppy.inc \
 			dev/dev.inc \
 			fs/fat.inc \

kernel/dev/at/ata.inc

@@ -0,0 +1,128 @@
+	;; File: ata.inc
+	;;
+	;; <ATA PIO Mode at https://wiki.osdev.org/ATA_PIO_Mode>
+	;; <IDE spec at https://www.cpcwiki.eu/imgs/a/a2/IDE_SPEC.PDF>
+
+ATA_PRIMARY_IO        = 0x1F0
+ATA_PRIMARY_IO_CTRL   = 0x3F6
+ATA_SECONDARY_IO      = 0x170
+ATA_SECONDARY_IO_CTRL = 0x376
+
+ATA_DATA     = 0x0
+	;; Constant: ATA_ERROR
+	;;
+ATA_ERROR    = 0x1
+ATA_ERROR_AMNF  = 0x01
+ATA_ERROR_TKZNF = 0x02
+ATA_ERROR_ABRT  = 0x04
+ATA_ERROR_MCR   = 0x08
+ATA_ERROR_IDNF  = 0x10
+ATA_ERROR_MC    = 0x20
+ATA_ERROR_UNC   = 0x40
+ATA_ERROR_BBK   = 0x80
+
+ATA_FEATURES = 0x1
+ATA_SECCOUNT = 0x2
+ATA_SECNUM   = 0x3
+ATA_CYLLO    = 0x4
+ATA_CYLHI    = 0x5
+	;; Constant: ATA_DRVHEAD
+	;; Drive/Head register
+	;;
+ATA_DRVHEAD  = 0x6
+ATA_DRVHEAD_DRV = 0x10
+ATA_DRVHEAD_LBA = 0x40
+
+ATA_COMMAND  = 0x7
+
+	;; Constant: ATA_STATUS
+	;; 
+ATA_STATUS   = 0x7
+ATA_STATUS_ERR  = 0x01
+ATA_STATUS_IDX  = 0x02
+ATA_STATUS_CORR = 0x04
+ATA_STATUS_DRQ  = 0x08
+ATA_STATUS_SRV  = 0x10
+ATA_STATUS_DF   = 0x20
+ATA_STATUS_RDY  = 0x40
+ATA_STATUS_BSY  = 0x80
+
+	;; Constant: ATA_CTRL
+	;; Device control register (Control base + 0)
+ATA_CTRL = 0x0
+ATA_CTRL_nIEN = 0x02
+ATA_CTRL_SRST = 0x04
+ATA_CTRL_HOB  = 0x80
+
+ATA_DRVADDR = 0x1
+ATA_DRVADDR_DS0 = 0x01
+ATA_DRVADDR_DS1 = 0x02
+ATA_DRVADDR_WTG = 0x40
+
+ATA_CMD_RESTORE    = 0x10
+ATA_CMD_DIAGNOSTIC = 0x90
+ATA_CMD_IDENTIFY   = 0xA0
+
+	;; Function: ata_wait
+ata_wait:
+	mov dx, ATA_PRIMARY_IO + ATA_STATUS
+	in al, dx
+	and al, ATA_STATUS_BSY
+	jnz ata_wait
+	ret
+
+	;; Function: ata_probe
+ata_probe:
+	xor ecx, ecx
+.loop:
+	call ata_wait
+	mov dx, ATA_DRVHEAD
+	mov al, cl
+
+	shl al, 4
+	or al, 0xa0
+	call ata_wait
+	mov dx, ATA_COMMAND
+	mov al, ATA_CMD_DIAGNOSTIC
+	out dx, al
+	call ata_wait
+	mov dx, ATA_STATUS
+	in al, dx
+	and al, ATA_STATUS_ERR or ATA_STATUS_DRQ
+	jnz @f
+	call ata_wait
+	mov dx, ATA_COMMAND
+	mov al, ATA_CMD_RESTORE
+	out dx, al
+	call ata_wait
+	mov dx, ATA_STATUS
+	in al, dx
+	and al, ATA_STATUS_ERR or ATA_STATUS_DRQ
+	jnz @f
+	push ecx
+	push ecx
+	mov esi, szMsgAtaFound
+	call klog
+	pop ecx
+@@:
+	inc cl
+	cmp cl, 2
+	jb .loop
+	ret
+
+	;; Function: ata_init
+ata_init:
+	call ata_probe
+	ret
+
+ata_primary_irq:
+	iret
+
+ata_secondary_irq:
+	iret
+
+ata_device:
+	db "ata", 0, 0, 0, 0, 0
+	dd ata_init
+
+szMsgAtaFound db "ATA: hd%u found", 0

kernel/dev/at/com.inc

@@ -1,4 +1,5 @@
 	;; File: com.inc
+	;; UART 8250, 16750 driver
 	;;
 	;; Usefull links:
 	;; - <PC16550D datasheet at https://www.scs.stanford.edu/10wi-cs140/pintos/specs/pc16550d.pdf>
@@ -14,8 +15,22 @@ UART8250_RBR = 0x0
 UART8250_THR = 0x0
 
 UART8250_IER = 0x1
+UART8250_IER_RDA   = 0x1
+UART8250_IER_THRE  = 0x2
+UART8250_IER_RLSRC = 0x4
+UART8250_IER_MSRC  = 0x8
+UART16750_IER_SLEEP = 0x10
+UART16750_IER_LPM   = 0x20
+
 UART8250_IIR = 0x2
+
 UART8250_FCR = 0x2
+UART8250_FCR_EN   = 0x1
+UART8250_FCR_CLSR = 0x2
+UART8250_FCR_CLST = 0x4
+UART8250_FCR_DMA  = 0x8
+UART16750_FCR_64EN = 0x20
+
 UART8250_LCR = 0x3
 UART8250_MCR = 0x4
 UART8250_MCR_OUT2 = 0x08

kernel/dev/at/ne2k.inc

@@ -108,10 +108,15 @@ ne2k_probe:
 	ret
 
 ne2k_irq:
+	pusha
+	mov esi, szMsgNe2kIRQ
+	call klog
+	popa
 	iret
 
 ne2k_device:
 	db 'ne2k', 0, 0, 0, 0
 	dd ne2k_init
 
 szMsgNe2kfound db "NE2K: found", 0
+szMsgNe2kIRQ db "NE2K: IRQ", 0

kernel/dev/dev.inc

@@ -6,6 +6,7 @@
 	include 'at/pit.inc'
 	include 'at/kbd.inc'
 	include 'at/cga.inc'
+	include 'at/ata.inc'
 	include 'at/floppy.inc'
 
 struc Device {
@@ -50,6 +51,7 @@ aDevices:
 	dd console_device
 	dd com_device
 	dd ne2k_device
+	dd ata_device
 .end:
 
 dev_init:

kernel/idt.inc

@@ -49,6 +49,14 @@ idt_setup:
 	mov eax, ne2k_irq
 	call idt_set_gate
 
+	mov ecx, 46
+	mov eax, ata_primary_irq
+	call idt_set_gate
+
+	mov ecx, 47
+	mov eax, ata_secondary_irq
+	call idt_set_gate
+
 	mov ecx, 0x42
 	mov eax, isr_syscall
 	call idt_set_gate