switch guides to use eclipse-threadx/eclipse/netxduo

Signed-off-by: Ryan Winter <[email protected]>

.gitmodules

@@ -1,9 +1,6 @@
 [submodule "shared/lib/threadx"]
 	path = shared/lib/threadx
-	url = https://github.com/azure-rtos/threadx.git
+	url = https://github.com/eclipse-threadx/threadx.git
 [submodule "shared/lib/netxduo"]
 	path = shared/lib/netxduo
-	url = https://github.com/azure-rtos/netxduo.git
-[submodule "shared/lib/jsmn/src"]
-	path = shared/lib/jsmn/src
-	url = https://github.com/zserge/jsmn
+	url = https://github.com/eclipse-threadx/netxduo.git

MXChip/AZ3166/app/CMakeLists.txt

@@ -6,7 +6,6 @@ set(SOURCES
     startup/startup_stm32f412rx.s
     startup/tx_initialize_low_level.S
     stm32cubef4/stm32f4xx_hal_msp.c
-    legacy/mqtt.c
     azure_config.h
     nx_client.c
     board_init.c
@@ -26,7 +25,6 @@ target_link_libraries(${PROJECT_NAME}
     mxchip_bsp
     wiced_sdk
     app_common
-    jsmn
 )
 
 target_include_directories(${PROJECT_NAME} 

MXChip/AZ3166/app/main.c

@@ -11,7 +11,6 @@
 #include "sntp_client.h"
 #include "wwd_networking.h"
 
-#include "legacy/mqtt.h"
 #include "nx_client.h"
 
 #include "azure_config.h"
@@ -26,19 +25,15 @@ static void azure_thread_entry(ULONG parameter)
 {
     UINT status;
 
-    printf("Starting Azure thread\r\n\r\n");
+    printf("Starting thread\r\n\r\n");
 
     // Initialize the network
     if ((status = wwd_network_init(WIFI_SSID, WIFI_PASSWORD, WIFI_MODE)))
     {
         printf("ERROR: Failed to initialize the network (0x%08x)\r\n", status);
     }
 
-#ifdef ENABLE_LEGACY_MQTT
-    else if ((status = azure_iot_mqtt_entry(&nx_ip, &nx_pool[0], &nx_dns_client, sntp_time_get)))
-#else
     else if ((status = azure_iot_nx_client_entry(&nx_ip, &nx_pool[0], &nx_dns_client, sntp_time)))
-#endif
     {
         printf("ERROR: Failed to run Azure IoT (0x%08x)\r\n", status);
     }
@@ -48,7 +43,7 @@ void tx_application_define(void* first_unused_memory)
 {
     systick_interval_set(TX_TIMER_TICKS_PER_SECOND);
 
-    // Create Azure thread
+    // Create thread
     UINT status = tx_thread_create(&azure_thread,
         "Azure Thread",
         azure_thread_entry,