This is a library which validates an Email Address. I do my best to support all existing RFCs:
- RFC 822
- RFC 5321
- RFC 5322 (updates
<atext>specification) - RFC 6531 (UTF-8 support; updates
<atext>specification)
A quick note about RFC 6531: it is possible that the correct implementation
SHOULD take into account RFC 20 to exclude some characters:
# ` { } | ~ ^. See the RFC 6531 switches section below.
You have to be NOT mistaken about the definition of Email Address. This software does NOT implement (at the moment, at least) a full support of Address Specification.
All that this software does it is validating of the Addr-Spec Specification. See details below:
address = mailbox / group
mailbox = name-addr / addr-spec
addr-spec = local-part "@" domain
- UTF-8 / IDNA2008 support
- FQDN & TLD check (configurable)
- Local-Part & Domain length check
General requirements:
- GNU make
- C99 compiler to compile
To rebuild the documentation and auto-generate TLD database:
The library SHOULD be thread-safe. Not tested yet.
The documentation may be found either in docs directory
or after installing this library via man command:
% man libeav
At the moment the build system looking for IDN libraries using next order:
In the case when you have installed libidn2 and libidn
or idnkit (i.e. any 2 or more libraries) on the system, but
you want to build libeav with specific library you have to
tell about that like it shown below:
% make FORCE_IDN=idn
% make check FORCE_IDN=idn
% make install DESTDIR=/path/to/install/dir
The FORCE_IDN option can have the next values
(self-described, I hope):
idnidn2idnkit
When there is no libidn2.pc file on the system (Debian 8,
for instance), then you may do this:
% make FORCE_IDN=idn2 DEFS="-DHAVE_LIBIDN2" LIBS="-lidn2"
First of all, you have to specify the directory where idnkit was installed. To do this you have two options:
- Export the
IDNKIT_DIRenvironment variable as showed below. - Manually change paths in Makefiles.
The library assumes that idnkit was installed in /usr/local
by default.
Secondly, if you planning to install the library to non-standard
directory you may change the destination directory by setting
DESTDIR variable manually.
The default value of DESTDIR is /usr/local.
% export INDKIT_DIR=/home/user/local
% make
% make check
% make install DESTDIR=/path/to/install
If you have libidn2 or libidn installed, then you must
use the FORCE_IDN option as show above.
It is possible to build the library to follow rules of RFC 5322 and RFC 20. To so, export or define inline the next options:
RFC6531_FOLLOW_RFC5322= ON | OFF (default OFF)RFC6531_FOLLOW_RFC20= ON | OFF (default OFF)
For instance, define the options above inline:
% make clean
% make check RFC6531_FOLLOW_RFC5322=ON RFC6531_FOLLOW_RFC20=ON
Briefly about the switches and these RFCs:
- RFC 5322 allows some CONTROL characters in quotes and quoted pairs. When
RFC6531_FOLLOW_RFC5322 = OFF, libeav disallows any CONTROL characters within local-part (copy the RFC 5321 behavior). - RFC 20 simply disallows the next GRAPHIC characters within local-part:
# ` { } | ~ ^.
See the code of is_6531_local.c file for details.
According to "2.3.1. Preferred name syntax" of RFC 1035, a mail domain should satisfy both the rules of the RFC 1035 and those in RFC 822.
Historically, many MX servers do allow underscores in the domain part of an
email addresses. The libeav is based on the code base of the postfix,
specifically, you may check this by looking at the file
src/util/valid_hostname.c of the current postfix distribution.
Since libeav 1.2.0 the new option was added:
LABELS_ALLOW_UNDERSCORE= ON | OFF (default OFF)
Pass it to the make command, for instance:
% make FORCE_IDN=idn2 LABELS_ALLOW_UNDERSCORE=ON
Before this, libeav had allowed underscores inside of the domain part of the email addresses by default.
Also should be noted that idnkit prohibits underscores within
the domain part of the email addresses. I'm highly recommending using
LABELS_ALLOW_UNDERSCORE=OFF along side with idnkit. At the moment,
libeav calls idnkit functions to check the domain part
only when RFC6531 mode is on.
First, there are three files, which corresponds to IANA's Root Zone Database:
- data/tld-domains.txt - used by tests
- src/auto_tld.c - used by the library
- include/eav/auto_tld.h - used by the library
The data/tld-domains.txt depends on data/raw.csv.
The auto_tld.c and auto_tld.h depends on data/punycode.csv.
Second, to update these files you need Perl and Text::CSV installed on your system.
Third, you have to obtain CSV files by yourself somehow. I am using the application written to this task, you may find it here: github: gh0stwizard/iana-tld-extractor.
To update data/tld-domains.txt use the command below:
% make tld-domains
To update src/auto_tld.c and include/eav/auto_tld.h use the next command:
% make auto
When compile your application with idnkit, please, pass the
-DHAVE_IDNKIT flag to the compiler.
Please, read the developer documentation for details.
There is an utility called eav. It will be installed by default to
the DESTDIR/bin directory. It has a simple usage:
% eav emails1.txt emails2.txt
See its sources in the bin directory.
The sample output is:
FAIL: localpart-only
email has no domain part
PASS: i.have.only.ipv4@[8.8.8.8]
PASS: this-is.ipv6@[IPv6:2001:0db8:0000:0000:0000:ff00:0042:8329]
PASS: and.this.is.ipv6-ipv4@[IPv6:::ffff:192.0.2.128]
FAIL: invalid.ipv4@[0.1.2.3]
invalid ip address
FAIL: invalid.ipv6@[IPv6:ge80:1::]
invalid ip address
PASS: valid.ipv6@[IPv6:2001:db8:0:1:1:1:1:1]
PASS: legacy.valid.ipv6@[IPv6:2001:db8::1:1:1:1:1]
PASS: xxx.ipv6@[2001:db8:1:1:1:1:1:1]
PASS: [email protected]
The idn command depends on the value of CHARSET environment variable.
Also, this environment variable affects the behaviour of the libidn
library.
If you are getting Character encoding conversion error, then try to
check and fix the CHARSET variable on your system. Depending on the
type of the operating system, the correct value may be utf-8 or
UTF-8, please, refer to the documentation of your system.
- UTF-8 decoder by JSON.org
- postfix written by Wietse Venema
This software is released under BSD 2-clause "Simplified" License.