Skip to content
This repository has been archived by the owner on Dec 29, 2022. It is now read-only.

google/cloudprint_logocert

Google Cloud Print Logo Certification Tool

The Logo Certification tool is a group of tests designed to aid in running
Logo Certification tests that printers must pass in order to obtain Logo
Certification. The tool is made up of a number of python files, and utilizes
the python UnitTest module to actually execute the tests.

List of modules and their purpose:

--> testcert.py - the entry point and driver of the tests. All of the actual
tests are located in this file.
--> _common.py - some shared functions within the package.
--> _config.py - configuration information. This needs to be updated for each
specific device under test. This file needs to be edited by the user executing
the test
--> _ticket.py - Provides the Cloud Job Ticket (CJT) object and methods to
specify various print options for both cloud printing and local printing
--> _cpslib.py - Methods to access GCP API's
--> _device.py - Methods to support populating the device attributes.
--> _gdocs.py - Methods to interact with Google Docs and Google Drive.
--> _jsonparser.py - Methods to parse and handle JSON formatted docs and strings.
--> _log.py - Provides a logger to ensure proper logging of all activities.
--> _zconf.py - Provides support for monitoring mdns advertisements.
--> _oauth2.py - Provides support to get oauth2 tokens.
--> _privet.py - Provides privet structures.
--> _sheets.py - Uses _gdocs.py to create and populate a Google spreadsheet.
--> _transport.py - Provides HTTP support for accessing web services.

The tests are divided into suites the focus on specific areas. The areas tested
are:

1. Privet Protocol Integration
2. Pre-registration Tests
3. Cloud Print Registration
4. Post-registration Tests
5. Local Discovery Tests
6. Local Print Tests
7. Printing Tests
8. Printer Capabilities
9. Printer State Tests
10. Job State Tests
11. Cloud Print Unregistration
12. Post-unregistration Tests

DEPENDENCIES:
(Instructions below are for Unix devices. For Windows,
 use easy_install.py from PythonDir/Scripts)

Requests module is required for HTTP comms. To install, use the command:
sudo pip install --upgrade requests

OAuth2Client and Google API client are required, To install, use the commands:

sudo pip install --upgrade oauth2client
sudo pip install --upgrade google-api-python-client

The Python Zeroconf package is used to execute some of the mDNS tests. Install
ZeroConf from the package located here:

Using PIP:
sudo pip install --upgrade zeroconf

Or download from one of the following:
https://pypi.python.org/pypi/zeroconf
https://github.com/jstasiak/python-zeroconf

The tool will also store test results into a Google Spreadsheet. If you want
to use this functionality, you will need to install gdata. Install gdata from:

https://github.com/google/gdata-python-client

gdata depends on tlslite, if you get an error stack trace such as:
File "/usr/local/lib/python2.7/dist-packages/gdata/oauth/rsa.py", line 10
  from tlslite.utils import keyfactory
ImportError: No module named tlslite.utils

then install tlslite by running:
sudo pip install tlslite

gdata also depends on ElementTree; however, most systems will have ElementTree
installed already. To test if it's installed, from a Python shell try:

from xml.etree import ElementTree

Before executing the Logo Certification Tool, a number of preparatory steps are
required to get your test environment set up correctly.

1. Test Account - Use a test account that uses Gmail, in order to properly
authenticate against Google properties and also use OAuth2 credentials. Once
you have obtained a test account, obtain OAuth2 credentials from the Google
Developers Console. You'll also need a 2nd test account, without the OAuth2
credentials.

- Log in with your test account at https://accounts.google.com/
- Access the Google Developers Console: https://console.developers.google.com
- Create a project
- Access the project you just created
- In the left three-bar/hamburger menu, open "API Manager"
- Select the Credentials link on the left
- Create an OAuth2.0 Client ID of type "Other", native has been renamed to
  "Other" in many places.
- Two tokens are needed: under Client ID for native applications, copy the
-- Client ID
-- Client Secret

2. Edit _config.py

The following sections should be edited:

-- AUTOMODE --
* You should probably set this to False, as this will cause each
  print test to wait for user input to determine if it passed or failed. If
  AUTOMODE = True, then all jobs will be printed out and regardless of how they
  look, the test will pass.

-- CAPS --
* This should reflect the actual capabilities of the printer. Set the
  following values to True or False, depending on if the printer supports them
  or not.

  Please refer to _config.py for instructions to populating these fields.

-- SLEEP --
* This script tries its best to avoid using sleep but in the case that it is
  used, you can tweak the sleep times based on the categories. The printer
  specific ones are REGISTRATION, and PRINTER_STATE, defaults are 5 and 10 secs
  respectively.

-- TEST['RUN'] --
* You may specify which tests to run/ignore via editing this.
  Add a '#' prefix in front of a test name to exclude from test
.

-- LOGFILES --
* Change this from /tmp/logocert if you want the log files to be stored in a
  different location.

-- PRINTER --
* Add the correct values for CERTID (Certification ID), FIRMWARE, IP address,
  MANUFACTURER, MODEL, PORT (integer, not string), SERIAL, and STATUS.

-- TEST --
* If you don't want the test results to be written to a Google Spreadsheet,
  then change SPREADSHEET to False.

* If you don't want to share the Google Sheets results with Google, set
  SHARE_SHEET_WITH_GOOGLE to False. However, it is highly recommended that you
  enable sharing to facilitate debugging and progress tracking. Setting
  SHARE_SHEET_WITH_GOOGLE to True enables read/write access for
  [email protected].

* If you are on a Windows machine and running the tool out of an ANSI color
  supporting console and want to enable color output, set FORCE_COLOR_OUTPUT
  to True.

-- USER --
* Add the client id, client secret of the test account from step 1. Also add the
  email address of this user.

-- USER2 --
* Add the email address of the 2nd test account.

Save the _config.py and then all of the preparatory work is completed. Now simply
execute testcert.py (NOTE: The user account should have no GCP printers registered
under it before this script runs):

./testcert.py

Note that the first time you run this script, you may need to enter your
credentials and sign in manually and click to authorize permissions. During the
tests, sometimes you'll be prompted to accept printer registration on the
device, and other times to ignore or cancel registration requests. Pay attention
to the testcert.py output as it will ask you to turn the printer on and off at
various times during the test process. All prompt actions are highlighted and
create a beep sound when they appear.

If you need to remove some of the test suites, edit _config.py (TEST['RUN']),
and add a '#' in front of suite names you don't want to run. Pay attention
to the whether the printer is registered or not before isolating suites however.
See the list below for the required initial condition of each suite.

The complete list of all testsuites and the order they should run is
as follows:

-------------------------Printer is UNREGISTERED before running the suites below
- SystemUnderTest
- Privet
- PreRegistration
- Registration
-------------------------Printer is REGISTERED before running the suites below
- PostRegistration
- LocalDiscovery
- Printer
- PrinterState
- JobState
- CloudPrinting
- LocalPrinting
- RunAfter24Hours
- Unregister
-------------------------Printer is UNREGISTERED before running the suites below
- PostUnregistration

The order that the test cases run is determined alphanumerically, but the suites
will run in the order they are placed in.

LocalPrinting has a one-time dependency on CloudPrinting. When the
LocalPrinting suite is run for the first time for a printer, it will make calls
to the GCP submit interface in order to download the converted pwg-raster images
that will be used in subsequent LocalPrinting tests. If Cloud Printing does not
work for your printer, you would have to manually generate pwg-raster formats of
testpage.png and rosemary.pdf then store them under the images directory as
testpage.pwg and rosemary.pwg.

Once the test has run, results will be placed in a log file. Log files are
created with a date-time stamp in the logname. All of the test results will be
annotated with passed, skipped, blocked, or failed, and possibly some other
debug information. And if TEST['SPREADSHEET'] = True, then the results will be
placed in a Google spreadsheet for easy reading of the test results.

For each test that are blocked or failed, a cmdline is provided in the Google
spreadsheet for the individual test case to be run again only by itself.
They follow this format:
    python -m unittest [moduleName].[testSuiteName].[testCaseName]
Example:
    python -m unittest testcert.Privet.testDeviceRegistrationInvalidClaimToken

Known Issues

1. Mac OSX

If running on Mac OSX, you may come across this error - 'AttributeError:
'Module_six_moves_urllib_parse' object has no attribute 'urlparse'' This occurs
due to OSX comes with an out-of-date six.py. To fix this, simply run the
following command each time you open a new terminal or add to bash profile:

     export PYTHONPATH=/Library/Python/2.7/site-packages

This will make python to check site-packages before the OSX system dirs

2. Windows

If running on Windows, you may not be able to detect any printers on start
up. This is due to an existing zeroconf issue:
python-zeroconf/python-zeroconf#84

There are two workarounds for this:

  a) Comment out the line "if addr.get('netmask') != HOST_ONLY_NETWORK_MASK" in
  zeroconf.py (Note: This requires editing a Python dependency)

  OR

  b) Downgrading zeroconf.py's dependency, netifaces, to 0.10.4

About

Google Cloud Print Logo Certification Automation

Resources

License

Code of conduct

Security policy

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published