Skip to content

gradual-verification/phasar

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

PhASAR logo

PhASAR a LLVM-based Static Analysis Framework

C++ Standard GitHub license

Version 0222

Secure Software Engineering Group

Required version of the C++ standard

PhASAR requires C++-17.

Currently supported version of LLVM

PhASAR is currently set up to support LLVM-14.0.

What is PhASAR?

PhASAR is a LLVM-based static analysis framework written in C++. It allows users to specify arbitrary data-flow problems which are then solved in a fully-automated manner on the specified LLVM IR target code. Computing points-to information, call-graph(s), etc. is done by the framework, thus you can focus on what matters.

How do I get started with PhASAR?

We have some documentation on PhASAR in our wiki. You probably would like to read this README first and then have a look on the material provided on https://phasar.org/ as well. Please also have a look on PhASAR's project directory and notice the project directory examples/ as well as the custom tool tools/myphasartool.cpp.

Building PhASAR

If you cannot work with one of the pre-built versions of PhASAR and would like to compile PhASAR yourself, then please check the wiki for installing the prerequisites and compilation. It is recommended to compile PhASAR yourself in order to get the full C++ experience and to have full control over the build mode.

Please help us to improve PhASAR

You are using PhASAR and would like to help us in the future? Then please support us by filling out this web form.

By giving us feedback you help to decide in what direction PhASAR should stride in the future and give us clues about our user base. Thank you very much!

Installation

PhASAR can be installed using the installer scripts as explained in the following.

Installing PhASAR on an Ubuntu system

In the following, we would like to give an complete example of how to install PhASAR using an Ubuntu or Unix-like system.

Therefore, we provide an installation script. To install PhASAR, just navigate to the top-level directory of PhASAR and use the following command:

$ sudo ./bootstrap.sh

Done!

Installing PhASAR a MacOS system

Due to unfortunate updates to MacOS and the handling of C++, especially on the newer M1 processors, we can't support native development on Mac. The easiest solution to develop PhASAR on a Mac right now is to use dockers development environments. Clone this repository as described in their documentation. Afterwards, you have to login once manually, as a root user by running docker exec -it -u root <container name> /bin/bash to complete the rest of the install process as described in this readme (install submodules, run bootstrap.sh, ...). Now you can just attach your docker container to VS Code or any other IDE, which supports remote development.

Compiling PhASAR (if not already done using the installation scripts)

Set the system's variables for the C and C++ compiler to clang:

$ export CC=/usr/local/bin/clang
$ export CXX=/usr/local/bin/clang++

You may need to adjust the paths according to your system. When you cloned PhASAR from Github you need to initialize PhASAR's submodules before building it:

$ git submodule init
$ git submodule update

If you downloaded PhASAR as a compressed release (e.g. .zip or .tar.gz) you can use the init-submodules-release.sh script that manually clones the required submodules:

$ utils/init-submodules-release.sh

Navigate into the PhASAR directory. The following commands will do the job and compile the PhASAR framework:

$ mkdir build
$ cd build/
$ cmake -DCMAKE_BUILD_TYPE=Release ..
$ make -j $(nproc) # or use a different number of cores to compile it
$ sudo make install # if you wish to install PhASAR system wide

When you have used the bootstrap.sh script to install PhASAR, the above steps are already done. Use them as a reference if you wish to modify PhASAR and recompile it.

After compilation using cmake the following two binaries can be found in the build/ directory:

  • phasar-llvm - the actual PhASAR command-line tool
  • myphasartool - an example tool that shows how tools can be build on top of PhASAR

Use the command:

$ ./phasar-llvm --help

in order to display the manual and help message.

$ sudo make install

Please be careful and check if errors occur during the compilation.

When using CMake to compile PhASAR the following optional parameters can be used:

Parameter : Type Effect
BUILD_SHARED_LIBS : BOOL Build shared libraries (default is ON)
CMAKE_BUILD_TYPE : STRING Build PhASAR in 'Debug' or 'Release' mode
(default is 'Debug')
CMAKE_INSTALL_PREFIX : PATH Path where PhASAR will be installed if
“make install” is invoked or the “install”
target is built (default is /usr/local/phasar)
PHASAR_BUILD_DOC : BOOL Build PhASAR documentation (default is OFF)
PHASAR_BUILD_UNITTESTS : BOOL Build PhASAR unit tests (default is ON)
PHASAR_BUILD_IR : BOOL Build PhASAR IR (required for running the unit tests) (default is ON)
PHASAR_BUILD_OPENSSL_TS_UNITTESTS : BOOL Build PhASAR unit tests that require OpenSSL (default is OFF)
PHASAR_ENABLE_PAMM : STRING Enable the performance measurement mechanism
('Off', 'Core' or 'Full', default is Off)
PHASAR_ENABLE_PIC : BOOL Build Position-Independed Code (default is ON)
PHASAR_ENABLE_WARNINGS : BOOL Enable compiler warnings (default is ON)

You can use these parameters either directly or modify the installer-script bootstrap.sh

A remark on compile time

C++'s long compile times are always a pain. As shown in the above, when using cmake the compilation can easily be run in parallel, resulting in shorter compilation times. Make use of it!

Running a test solver

To test if everything works as expected please run the following command:

$ phasar-llvm --module test/build_systems_tests/installation_tests/module.ll -D ifds-solvertest

If you obtain output other than a segmentation fault or an exception terminating the program abnormally everything works as expected.

How to use PhASAR?

Please consult our PhASAR wiki pages.

Installing PhASAR's Git pre-commit hook

You are very much welcome to contribute to the PhASAR project. Please make sure that you install our pre-commit hook that ensures your commit adheres to the most important coding rules of the PhASAR project. For more details please consult Coding Conventions and Contributing to PhASAR.

To install the pre-commit hook, please run the following commands in PhASAR's root directory:

$ pip install pre-commit
$ pre-commit install

Thanks. And have fun with the project.

About

A LLVM-based static analysis framework.

Resources

License

Code of conduct

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C++ 93.5%
  • CMake 2.7%
  • C 1.5%
  • Python 1.4%
  • Shell 0.6%
  • Makefile 0.2%
  • Dockerfile 0.1%