Skip to content

hcl-dr/barebox-as

 
 

Repository files navigation

barebox

A bootloader that follows the tradition of Das U-Boot, while adopting modern design ideas from the Linux kernel.

Try it out in your browser ✨ · Check out the documentation 📖 · Get involved 🫶

Features

  • A POSIX-based file API: Inside barebox the usual open/close/read/write/lseek functions are used. This makes it familiar to everyone who has programmed under UNIX systems.
  • Usual shell commands like ls/cd/mkdir/echo/cat/cp/mount,... which work uniformly across file systems
  • Filesystem support: The loader starts up with mounting a ramdisk on /. Then a devfs is mounted on /dev allowing the user (or shell commands) to access devices. Apart from these two filesystems there are a number of different filesystems ported: ext4, efi, efivarfs, ext4, fat, jffs2, NFS, tftp, pstore, squashfs, ubifs, ratp (RFC916), u-boot variable FS among others.
  • Multiplatform support: Configurations like multi_v7_defconfig and multi_v8_defconfig build barebox for many dozens of boards all at once. All resulting images share the same barebox proper binary, each time with a different prebootloader that does low-level initialization and passes in the device tree. Prebootloaders may detect board/SoC type and pass in different device trees to support various boards with the same image.
  • Focus on developer experience: barebox provides many features that should be familiar to kernel developers
    • barebox images are designed to be bootable from within barebox itself, so developers can trivially network boot. For chainloading from existing bootloaders, there's also an extra barebox-dt-2nd.img that is bootable exactly like a Linux kernel.
    • KASAN (KernelAddressSanitizer) and kallsyms (symbolized stack traces) help in hunting down memory issues
    • ramoops allows barebox to share its own dmesg log with Linux
    • Linux kernel drivers are easier to port, because the driver frameworks are closely based on the upstream Linux counterpart
  • Device parameter support: Each device can have an unlimited number of parameters. They can be accessed on the command line with <devid>.<param>="...", for example eth0.ip=192.168.0.7 or echo $eth0.ip.
  • Editor: Scripts can be edited with a small editor. This editor has no features except the ones really needed: moving the cursor and typing characters on multiple lines.
  • The environment is not a variable store anymore, but a file store. The saveenv command archives the files under a certain directory (by default /env) in persistent storage (by default /dev/env0). There is a counterpart called loadenv, too. Additionally, barebox-state provides power-fail-safe variable-only storage with optional authentication, so the mutable environment can be disabled for security reasons.
  • Uniformity: Finding out where barebox booted from, determining what caused the last reset, booting in a redundant fail-safe manner, updating barebox on disk are examples of functionality handled generically by frameworks, so boards can look and feel the same and custom scripts or board code are only needed for the exceptional stuff.
  • device/driver model: Devices are no longer described by defines in the config file. Instead devices are registered as they are discovered (e.g. through OpenFirmware device tree traversal or EFI handles) or by board code. Drivers will match upon the devices automatically.
  • Device Tree Manipulation: barebox has extensive support for fixing up both its own device tree at runtime and the kernel's, whether from board code, shell scripts or within device tree overlays
  • Initcalls: hooks in the startup process can be achieved with *_initcall() directives in each file.
  • ARCH=sandbox simulation target: barebox can be compiled to run under Linux. While this is rather useless in real world this is a great debugging and development aid. New features can be easily developed and tested on long train journeys and started under gdb. There is a console driver for Linux which emulates a serial device and a TAP-based Ethernet driver. Linux files can be mapped to devices under barebox to emulate storage devices.
  • and yes, of course it runs DOOM.

Building barebox

barebox uses the Linux kernel's build system. It consists of two parts: the Makefile infrastructure (kbuild), plus a configuration system (kconfig). So building barebox is very similar to building the Linux kernel.

For the examples below, we use the User Mode barebox implementation, which is a port of barebox to the Linux userspace. This makes it possible to test drive the code without having real hardware. So for this test scenario, ARCH=sandbox is the valid architecture selection. This currently works on at least IA32 hosts and x86-64 hosts.

Selection of the architecture and the cross compiler can be done by using the environment variables ARCH and CROSS_COMPILE.

In order to configure the various aspects of barebox, start the barebox configuration system:

# make menuconfig

This command starts a menu box and lets you select all the different options available for your architecture. Once the configuration was finished (you can simulate this by using the standard demo config file with make sandbox_defconfig), there is a .config file in the toplevel directory of the source code.

Once barebox is configured, we can start the compilation:

# make

If everything goes well, the result is a file called barebox:

# ls -l barebox
  -rwxr-xr-x 1 rsc ptx 114073 Jun 26 22:34 barebox

To get some files to play with, you can generate a squashfs image:

# mksquashfs somedir/ squashfs.bin

The barebox image is a normal Linux executable, so it can be started just like every other program:

# ./barebox -i squashfs.bin

add fd0 backed by file squashfs.bin
add stickypage backed by file /run/user/1000/barebox/stickypage.1661112

barebox 2024.07.0 #0 Wed Jul 18 11:36:31 CEST 2024
[...]

barebox@Sandbox:/

Specifying -[ie] <file> tells barebox to map the file as a device under /dev. Files given with -e will appear as /dev/env[n]. Files given with -i will appear as /dev/fd[n].

If barebox finds a valid configuration sector on /dev/env0 it will load it to /env. It then source /env/init/* if it exists. If you have loaded the example environment, barebox will show you a menu asking for your settings. The sandbox configuration embeds a "sticky page", which is inherited across barebox resets. This way, there's a usable environment out-of-the-box.

If you have started barebox as root, you will find a new tap device on your host which you can configure using ifconfig. Once you configured barebox' network settings accordingly you can do a ping or tftpboot.

If you have mapped a squashfs image, try mounting it with:

barebox@Sandbox:/ mount fd0
mounted /dev/fd0 on /mnt/fd0

When called with a single argument, the barebox mount command will inspect the source device file's magic bytes and mount it with the appropriate file system under /mnt.

Memory can be examined as usual using md/mw commands. They understand the -s <file> and -d <file> options respectively to tell the commands that they should work on the specified files instead of /dev/mem which holds the complete address space.

Directory Layout

Most of the directory layout is based upon the Linux Kernel

arch/*
arch/*/include
arch/*/mach-*
include/mach/*
contains architecture specific parts
architecture specific includes
SoC specific code
SoC specific includes
drivers/serial
drivers/net/dsa/
drivers/...
drivers
fs/
filesystem support and filesystem drivers
lib/
generic library functions (getopt, readline and the like)
common/
common/boards
common stuff
board code shared between multiple boards (possibly of different architectures)
commands/
Commands that can be executed by the barebox shell
net/
Networking stuff
scripts/
Kconfig system and tools used during barebox build or for deploying it
Documentation/
Sphinx generated documentation. Call "make docs" to generate a HTML version in Documentation/html.
defaultenv/
default environment assembled into images. Board environment is overlaid on top
dts/
An import of the upstream device tree repository maintained as part of the Linux kernel

Release Strategy

barebox is developed with git. On a monthly schedule, tarball releases are branched from the repository and released on the project web site. Here are the release rules:

  • Releases follow a time based scheme:

    barebox-xxxx.yy.z.tar.bz2
            ^^^^ ^^ ^----------- Bugfix Number, starting at 0
              \   \------------- Month
               \---------------- Year
    

    Example: barebox-2024.08.0.tar.bz2

  • As we are aiming for monthly releases, development is considered to be a continuous process. If you find bugs in one release, you have the chance to get patches in on a very short time scale (usually a month at most).

  • New features are applied to the next branch. Fixes directly to the master branch. Releases are always branched from master and then next is merged into master. Thus new features take 1-2 months until they hit a release.

  • Usually, there are no bugfix releases, so z=0. If there is a need to make a bugfix release, z is the right place to increment.

  • If there may be a reason for pre releases, they are called

    barebox-xxxx.yy.z-pren.tar.bz
                         ^------ Number of prerelease, starting with 1
    

    Example: barebox-2009.12.0-pre1.tar.bz2

    We think that there is no need for pre releases, but if it's ever necessary, this is the scheme we follow.

  • Only the monthly releases are archived on the web site. The tarballs are located in https://www.barebox.org/download/ and this location does never change, in order to make life easier for distribution people.

Contributing

barebox collaboration happens chiefly on the <[email protected]> mailing list.

The repository can be forked on Github <https://github.com/barebox/barebox> to run the CI test suite against the virtualized targets before submitting patches.

Refer to the introduction section in the documentation for more information.

License

Copyright (C) 2000 - 2005 Wolfgang Denk, DENX Software Engineering, [email protected].
Copyright (C) 2018 Sascha Hauer, Pengutronix, and individual contributors

barebox is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License, version 2, as published by the Free Software Foundation.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License in the file COPYING along with this program. If not, see <https://www.gnu.org/licenses/>.

Individual files may contain the following SPDX license tags as a shorthand for the above copyright and warranty notices:

SPDX-License-Identifier: GPL-2.0-only
SPDX-License-Identifier: GPL-2.0-or-later

This eases machine processing of licensing information based on the SPDX License Identifiers that are available at http://spdx.org/licenses/.

Also note that some files in the barebox source tree are available under several different GPLv2-compatible open-source licenses. This fact is noted clearly in the file headers of the respective files and the full license text is reproduced in the LICENSES/ directory.

About

The barebox bootloader - Mirror of ssh://[email protected]/barebox

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C 95.7%
  • C++ 1.1%
  • Assembly 0.8%
  • Perl 0.7%
  • Makefile 0.7%
  • Shell 0.4%
  • Other 0.6%