Initial target is SiFive's Unleashed U540.
U540 BSP components:
- MultiZone: loaded to flash via OpenOCD => 0x2000_0000;
- ZSBL: loaded to flash via OpenOCD => 0x2080_0000;
- FSBL: loaded to mSD card => 0x0800_0000 L2 LIM;
- BBL Linux: loaded to mSD card => 0x8000_0000 DDR;
This repository is maintained by Hex Five Security. For Questions or feedback - send email to info 'at' hex-five.com
Download Hex Five's reference toolchain or build your own:
-
GNU Embedded Toolchain - v2018.12.26: http://hex-five.com/riscv-gnu-toolchain-20181226
-
OpenOCD - v2018.12.26: http://hex-five.com/riscv-openocd-20181226
Install the prebuilt RISC-V toolchain for Linux:
sudo apt update
sudo apt upgrade -y
sudo apt install git make default-jre libftdi1-dev
sudo ln -s /usr/lib/x86_64-linux-gnu/libmpfr.so.6 /usr/lib/x86_64-linux-gnu/libmpfr.so.4
wget https://hex-five.com/wp-content/uploads/riscv-gnu-toolchain-20181226.tar.xz
tar -xvf riscv-gnu-toolchain-20181226.tar.xz
wget https://hex-five.com/wp-content/uploads/riscv-openocd-20181226.tar.xz
tar -xvf riscv-openocd-20181226.tar.xz
git clone https://github.com/hex-five/multizone-sdk
sudo apt-get install libusb-0.1-4
sudo apt-get install picocom
sudo apt-get install screen
Note: for the Ubuntu 19.04 LTS you may need to install the libncurses5 package.
sudo apt-get install libncurses5:i386 sudo apt-get install libncurses5:amd64
Add environment variables and a path to allow the Makefiles to find the toolchain by editing the ~/.bashrc and placing the following text at the bottom of the file:
export RISCV=/home/<username>/riscv-gnu-toolchain-20181226
export OPENOCD=/home/<username>/riscv-openocd-20181226
export PATH="$PATH:/home/<username>/riscv-gnu-toolchain-20181226/bin"
Note: <username> shall be replaced by your username.
Close and restart the terminal session for these changes to take effect.
- Download the prebuilt MultiZone for Linux package from Hex Five's website (http://hex-five.com/multizone-linux-20190808):
$ wget https://hex-five.com/wp-content/uploads/multizone-linux-20190808.tar.xz
$ tar -xvf multizone-linux-20190808.tar.xz
$ cd multizone-linux-release/
- Flash the Board (Multizone & ZSBL):
$ ./flash.sh board
- Flash the SD Card (FSBL & BBL)
$ ./flash.sh </dev/sdX>
Note: </dev/sdX> shall be replaced with the device name of the SD card (e.g, /dev/mmcblock0 or /dev/sda).
(If you just want to test the Multizone for Linux SDK reference image, please skip directly to "Demo".)
- Clone the MultiZone for Linux SDK repo:
$ git clone https://github.com/hex-five/multizone-linux
- Build the MultiZone SDK for the U540:
$ make BOARD=U540
- Load the MultiZone SDK image to flash (0x2000_0000):
$ make load BOARD=U540
The MultiZone system contains four zones:
- Zone 1: Multizone demo console accessible via Linux device /dev/multizone1;
- Zone 2: Multizone demo console accessible via Linux device /dev/multizone2;
- Zone 3: Multizone demo console accessible via UART 115200/8/N/1 (expansion board);
- Zone 4: MultiZone Heartbeat LED D4 and message echo;
Set the mode select switches to '0001':
USB LED Mode Select Ethernet
+===|___|==****==+-+-+-+-+-+-+=================|******|===+
| | | | |X|X|X| | | |
| | | | | | | | | | |
| HFXSEL->|X|X|X| | | | |______| |
| +-+-+-+-+-+-+ |
| RTCSEL-----/ 0 1 2 3 <--MSEL |
| |
-
Power the board.
-
Connect to the UART by setting the baudrate to 115200/8/N/1:
$ picocom /dev/<ttyUSB_DEVICE> -b 115200
Note: <ttyUSB_DEVICE> shall be replaced with the correct UART device name (e.g, ttyUSB0, ttyUSB1).
You should be able to see on the terminal the FSBL loading the BBL image:
SiFive FSBL: 2019-08-7-d8f6e2f
Using FSBL DTB
HiFive-U serial #: 00000068
Loading boot payload.........................
Once the BBL boots Linux, Linux starts executing:
bbl loader
...
- Login to Linux using the root accout:
Welcome to Buildroot
buildroot login: root
Password: hexfive
#
- Connect to Zone1 via Linux:
# screen /dev/multizone1
You shall be able to see and operate the terminal running on Zone1:
=====================================================================
Hex Five MultiZone(TM) Security
Copyright (C) 2018 Hex Five Security Inc. All Rights Reserved
=====================================================================
This version of MultiZone(TM) is meant for evaluation purposes only.
As such, use of this software is governed by your Evaluation License.
There may be other functional limitations as described in the
evaluation kit documentation. The full version of the software does
not have these restrictions.
=====================================================================
Machine ISA : 0x00101105 RV64 ACIMU
Vendor : 0x00000000
Architecture : 0x00000000
Implementation: 0x00000000
Hart ID : 0x00000000
CPU clock : 1000 MHz
Z1 >
Note: you may need to type 'restart' to see the full initial screen.
- Connect to Zone2 via Linux using SSH:
$ ssh [email protected]
The authenticity of host '192.168.0.2 (192.168.0.2)' can't be established.
ECDSA key fingerprint is SHA256:5CMY+vBWX7VIyJ+ejpwtw9kojdYogIdBFPSJ9YmG33g.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.0.2' (ECDSA) to the list of known hosts.
[email protected]'s password: hexfive
# screen /dev/multizone2
Note: you may need to delete the old key before executing the SSH command.
ssh-keygen -f "/home/<username>/.ssh/known_hosts" -R "192.168.0.2"
- Operate the Zone2 console:
=====================================================================
Hex Five MultiZone(TM) Security
Copyright (C) 2018 Hex Five Security Inc. All Rights Reserved
=====================================================================
This version of MultiZone(TM) is meant for evaluation purposes only.
As such, use of this software is governed by your Evaluation License.
There may be other functional limitations as described in the
evaluation kit documentation. The full version of the software does
not have these restrictions.
=====================================================================
Machine ISA : 0x00101105 RV64 ACIMU
Vendor : 0x00000000
Architecture : 0x00000000
Implementation: 0x00000000
Hart ID : 0x00000000
CPU clock : 1000 MHz
Z2 > pmp
0x20020000 0x2002FFFF r-x NAPOT
0x08002000 0x08002FFF rw- NAPOT
Z2 >
- In case the HiFive Unleashed U540 is connected to the Microchip / Microsemi Aloe Vera kit, it's possible to operate Zone3 via the UART (J36) available on the expansion board:
$ picocom /dev/<ttyUSB_DEVICE> -b 115200
Note: <ttyUSB_DEVICE> shall be replaced with the correct UART device name (e.g, ttyUSB0, ttyUSB1).
You shall be able to see and operate the terminal running on Zone3:
=====================================================================
Hex Five MultiZone(TM) Security
Copyright (C) 2018 Hex Five Security Inc. All Rights Reserved
=====================================================================
This version of MultiZone(TM) is meant for evaluation purposes only.
As such, use of this software is governed by your Evaluation License.
There may be other functional limitations as described in the
evaluation kit documentation. The full version of the software does
not have these restrictions.
=====================================================================
Machine ISA : 0x00101105 RV64 ACIMU
Vendor : 0x00000000
Architecture : 0x00000000
Implementation: 0x00000000
Hart ID : 0x00000000
CPU clock : 1000 MHz
Z3 >
Note:
Alternative way to run the demo via Ethernet (no UART connection required):Open a first SSH session as described above then connect to Zone1 via:
# screen /dev/multizone1Open a second SSH sessions as described above then connect to Zone2 via:
# screen /dev/multizone2To terminate screen sessions type: crtl-a k.
MultiZone and HEX-Five are registered trademarks of Hex Five Security, Inc.
MultiZone technology is protected by patents US 11,151,262 and PCT/US2019/038774