Skip to content
/ ga Public
forked from GlobalArrays/ga

Partitioned Global Address Space (PGAS) library for distributed arrays

Notifications You must be signed in to change notification settings

hoopoepg/ga

 
 

Repository files navigation

GLOBAL ARRAYS
~~~~~~~~~~~~~

DISCLAIMER
==========

This material was prepared as an account of work sponsored by an
agency of the United States Government.  Neither the United States
Government nor the United States Department of Energy, nor Battelle,
nor any of their employees, MAKES ANY WARRANTY, EXPRESS OR IMPLIED,
OR ASSUMES ANY LEGAL LIABILITY OR RESPONSIBILITY FOR THE ACCURACY,
COMPLETENESS, OR USEFULNESS OF ANY INFORMATION, APPARATUS, PRODUCT,
SOFTWARE, OR PROCESS DISCLOSED, OR REPRESENTS THAT ITS USE WOULD NOT
INFRINGE PRIVATELY OWNED RIGHTS.

ACKNOWLEDGMENT
==============

This software and its documentation were produced with United States
Government support under Contract Number DE-AC06-76RLO-1830 awarded
by the United States Department of Energy. The United States
Government retains a paid-up non-exclusive, irrevocable worldwide
license to reproduce, prepare derivative works, perform publicly and
display publicly by or for the US Government, including the right to
distribute to other US Government contractors.

The primary current source of funding for development of GA is the DoE-2000
ACTS project. GA is a part of the ACTS toolkit:

    http://acts.nersc.gov 

FOR THE IMPATIENT
=================

The command::

    ./configure && make && make install

should compile the static GA library (libga.a) to use sockets and install
headers and libraries to /usr/local/include and /usr/local/lib, respectively.

Please refer to the INSTALL file for generic build instructions.  That is a
good place to start if you are new to using "configure; make; make install"
types of builds.  Detailed instructions are covered later in this file.

QUESTIONS/HELP/SUPPORT/BUG-REPORT
=================================

email: [email protected]

If you encounter any problems, please first refer to the file NOTES located in
the same directory and see the GA support webpage:

    http://www.emsl.pnl.gov/docs/global/support.html

Please don't hesitate to send us an email.  An archive of emails is available
at:

    http://groups.google.com/group/hpctools

WHERE IS THE DOCUMENTATION?
===========================

The GA webpage has the most current versions of the Fortran and C documentation
and the User's Manual in the HTML format:

    http://www.emsl.pnl.gov/docs/global/

ABOUT THIS SOFTWARE
===================

This directory contains the Global Arrays (GA), Aggregate Remote Memory Copy
Interface (ARMCI) run-time library, and Memory Allocator (MA), parallel I/O
libraries (DRA,EAF,SF), TCGMSG, and TCGMSG-MPI packages bundled together. 

Global Arrays is a portable Non-Uniform Memory Access (NUMA) shared-memory
programming environment for distributed and shared memory computers. It
augments the message-passing model by providing a shared-memory like access to
distributed dense arrays.

ARMCI provides one-sided remote memory operations used by GA.

DRA (Disk Resident Arrays) is a parallel I/O library that maintains dense 2-dim
arrays on disk. 

SF (Shared Files) is a parallel I/O library that allows noncollective I/O to a
parallel file.

EAF (Exclusive Access Files) is parallel I/O library that supports I/O to
private files.

TCGMSG is a simple, efficient, but becoming obsolete message-passing library.

TCGMSG-MPI is a TCGMSG interface implementation on top of MPI and ARMCI. 

MA is a dynamic memory allocator/manager for Fortran and C programs.

GA++ is a C++ binding for global arrays.

See file 'COPYRIGHT' for copying conditions.
See file 'INSTALL' for compilation and installation instructions (generic).
See file 'NEWS' for a list of major changes in the current release.
See file 'AUTHORS' for the names of anyone who has contributed to GA.
See file 'NOTES' for a few platform-specific symptoms and fixes.

DIRECTORY STRUCTURE (ALPHABETICALLY)
====================================

- armci
    + config        (configuration makefile includes)
    + doc           (documentation for ARMCI library)
    + lib           (compatibility source files for missing system features)
    + src           (source code for ARMCI library)
- build-aux         (autotools support scripts)
- cca               (common component architecture)
- compat            (compatibility source files for missing system features)
- doc               (documentation)
- ga++              (C++ Bindings for Global Arrays)
    + doc           (contains sample Doxyfile for Doxygen doc generator)
    + src           (source code for GA C++ bindings)
    + testing       (test programs)
- gaf2c             (Fortran-to-C compatibility library and tests)
- global
    + doc           (paper & documentation in PostScript, HTML & plain text)
    + src           (source code for GA library)
    + testing       (GA test programs and performance results)
    + trace         (library and programs to generate and process tracefiles)
    + X             (xregion visualization program for GA)
- LinAlg            (linear algebra software used by GA)
    + lapack+blas
- m4                (autoconf macros)
- ma                (Memory Allocator) 
    + man
- pario
    + dra           (Disk Resident Array Library code)
    + eaf           (Exclusive Access Files Library code)
    + elio          ("device" layer for other parallel I/O models)
    + sf            (Shared Files Library code)
- tcgmsg            (simple, legacy message-passing library)
    + ipcv4.0    
    + ipcv5.0    
    + tcgmsg-mpi    (TCGMSG on top of MPI)

HOW TO BUILD THE PACKAGE?
=========================

Please refer to the INSTALL file for generic build instructions.  That is a
good place to start if you are new to using "configure; make; make install"
types of builds.  The following will cover platform-specific considerations as
well as the various optional features of GA.  Customizations to the GA build
via the configure script are discussed next.

Configuration Options
---------------------

There are many options available when configuring GA.  Although configure can
be safely run within this distributions' root folder, we recommend performing
an out-of-source (aka VPATH) build.  This will cleanly separate the generated
Makefiles and compiled object files and libraries from the source code.  This
will allow, for example, one build using sockets versus another build using
OpenIB for the communication layer to use the same source tree e.g.::

    mkdir bld_mpi_sockets && cd bld_mpi_sockets && ../configure
    mkdir bld_mpi_openib  && cd bld_mpi_openib  && ../configure --with-openib

Regardless of your choice to perform a VPATH build, the following should
hopefully elucidate the myriad options to configure.  Only the options
requiring additional details are documented here.  ./configure --help will
certainly list more options in addition to limited documentation.

--disable-f77           Disable Fortran code. This used to be the old
                        GA_C_CORE or NOFORT environment variables which
                        enabled the C++ bindings. However, it is severely
                        broken. There are certain cases where Fortran code is
                        required but this will not inhibit the building of the
                        C++ bindings.  In the future we may be able to
                        eliminate the need for the Fortran compiler/linker.
                        Use at your own risk (of missing symbols at link-time.)
--enable-cxx            Build C++ interface. This will require the C++ linker
                        to locate the Fortran libraries (handled
                        automatically) but user C++ code will require the same
                        considerations (C++ linker, Fortran libraries.)
--disable-opt           Don't use hard-coded optimization flags. GA is a
                        highly-optimized piece of software. There are certain
                        optimization levels or flags that are known to break
                        the software. If you experience mysterious faults,
                        consider rebuilding without optimization by using this
                        option.
--enable-peigs          Enable Parallel Eigensystem Solver interface. This
                        will build the stubs required to call into the peigs
                        library (external). 
--enable-checkpoint     Enable checkpointing.  Untested.  For use with old
                        X-based visualization tool.
--enable-profile        Enable profiling. Not sure what this does, sorry.
--enable-trace          Enable tracing. Not sure what this does, sorry.
--enable-thread-safety  **unsupported** Turn on thread safety.
--enable-underscoring   Force single underscore for all external Fortran
                        symbols. Usually, configure is able to detect the name
                        mangling scheme of the detected Fortran compiler and
                        will default to using what is detected. This includes
                        any variation of zero, one, or two underscores or
                        whether UPPERCASE or lowercase symbols are used. If
                        you want to force a single underscore which was the
                        default of older GA builds, use this option.
                        Otherwise, you can use the FFLAGS environment variable
                        to override the Fortran compiler's or platform's
                        defaults e.g. configure FFLAGS=-fno-underscoring.
--enable-i4             Use 4 bytes for Fortran INTEGER size. Otherwise, the
                        default INTEGER size is set to the results of the C
                        sizeof(void*) operator.
--enable-i8             Use 8 bytes for Fortran INTEGER size. Otherwise, the
                        default INTEGER size is set to the results of the C
                        sizeof(void*) operator.
--enable-shared         Build shared libraries [default=no]. Useful, for
                        example, if you plan on wrapping GA with an
                        interpreted language such as Python. Otherwise, some
                        systems only support static libraries (or vice versa)
                        but static libraries are the default.

For most of the external software packages an optional argument is allowed
(represented as ARG below.) **ARG can be omitted** or can be one or more
whitespace-separated directories, linker or preprocessor directives.  For
example::

    --with-mpi="/path/to/mpi -lmylib -I/mydir"
    --with-mpi=/path/to/mpi/base
    --with-mpi=-lmpich

The messaging libraries supported include MPI, TCGMSG, and TCGMSG over MPI.  If
you omit their respective --with-* option, MPI is the default.  GA can be built
to work with MPI or TCGMSG. Since the TCGMSG package is small (comparing to
portable MPI implementations), compiles fast, it is still bundled with the GA
package.

--with-mpi=ARG          Select MPI as the messaging library (default). If you
                        omit ARG, we attempt to locate the MPI compiler
                        wrappers. If you supply anything for ARG, we will
                        parse ARG as indicated above.
--with-tcgmsg           Select TCGMSG as the messaging library; if
                        --with-mpi is also specified then TCGMSG over MPI is
                        used.
--with-vampir=ARG       Enable VAMPIR performance tracing.
                        http://www.vampir.eu
--with-blas=ARG         Use external BLAS library; attempt to detect
                        sizeof(INTEGER) used to compile BLAS; if not found, an
                        internal BLAS is built
--with-blas4=ARG        Use external BLAS library compiled with
                        sizeof(INTEGER)==4
--with-blas8=ARG        Use external BLAS library compiled with
                        sizeof(INTEGER)==8
--with-lapack=ARG       Use external LAPACK library. If not found, an internal
                        one is built.
--with-scalapack=ARG    Use external ScaLAPACK library.

The ARMCI networks supported are listed next.  Our ability to automatically
locate required headers libraries is currently inadequate.  Therefore, you will
likely need to specify the optional ARG pointing to the necessary directories
and/or libraries. sockets is the default ARMCI network if nothing else is
specified.

--with-bgml=ARG         select armci network as IBM BG/L
--with-cray-shmem=ARG   select armci network as Cray XT shmem
--with-dcmf=ARG         select armci network as IBM BG/P Deep Computing
                        Message Framework
--with-lapi=ARG         select armci network as IBM LAPI
--with-mpi-spawn=ARG    select armci network as MPI-2 dynamic process mgmt
--with-openib=ARG       select armci network as Infiniband OpenIB
--with-portals=ARG      select armci network as Cray XT portals
--with-sockets=ARG      select armci network as Ethernet TCP/IP (default)

There are some influential environment variables as documented in configure
--help, however there are a few that are special to GA.

- THREAD_LIBRARY
  See --enable-thread-safety. I don't know what this does, sorry.

- F77_INT_FLAG
  Fortran compiler flag to set the default INTEGER size. We know about certain
  Fortran flags that set the default INTEGER size, but there will certainly be
  some new (or old) ones that we don't know about. If the configure test to
  determine the correct flag fails, please try setting this variable and
  rerunning configure.

- F2C_HIDDEN_STRING_LENGTH_AFTER_ARGS
  If cross compiling, set to either "yes" (default) or "no" (after string).
  For compatibility between Fortran and C, a Fortran subroutine written in C
  that takes a character string must take an additional argument (one per
  character string) indicating the length of the string. This 'hidden'
  argument appears either immediately after the string in the argument list
  or after all other arguments to the function. This is compiler dependent. We
  attempt to detect this behavior automatically, but in the case of
  cross-compiled systems it may be necessary to specify the less usual after
  string convention the gaf2c/testarg program crashes.

Special Notes for BLAS
----------------------

BLAS, being a Fortran library, can be compiled with a default INTEGER size of
4 or a promoted INTEGER size of 8.  Experience has shown us that most of the
time the default size of INTEGER used is 4.  In some cases, however, you may
have an external BLAS library which is using 8-byte INTEGERs.  In order to
correctly interface with an external BLAS library, GA must know the size of
INTEGER used by the BLAS library.

configure has the following BLAS-related options: --with-blas, --with-blas4,
and --with-blas8.  The latter two will force the INTEGER size to 4- or
8-bytes, respectively.  The first option, --with-blas, defaults to 4-byte
INTEGERS *however* in the two special cases of using ACML or MKL, it is
possible to detect 8-byte INTEGERs automatically.  As documented in the ACML
manual, if the path to the library has "_int64" then 8-byte INTEGERs are used.
As documented in the MKL manual, if the library is "ilp64", then 8-byte
INTEGERs are used.

You may always override --with-blas by specifying the INTEGER size using one
of the two more specific options.

Cross-Compilation Issues
------------------------

Certain platforms cross-compile from a login node for a compute node, or one
might choose to cross-compile for other reasons. Cross-compiling requires the
use of the --host option to configure which indicates to configure that certain
run-time tests should not be executed. See INSTALL for details on use of the
--host option.

Two of our target platforms are known to require cross-compilation, Cray XT and
IBM Blue Gene.

Cray XT
+++++++

It has been noted that configure still succeeds without the use of the --host
flag.  If you experience problems without --host, we recommend::

    configure --host=x86_64-unknown-linux-gnu

And if that doesn't work (cross-compilation is not detected) you must then
*force* cross-compilation using both --host and --build together::

    configure --host=x86_64-unknown-linux-gnu --build=x86_64-unknown-linux-gnu

BlueGene/P
++++++++++

Currently the only way to detect the BGP platform and compile correctly is to
use::

    configure --host=powerpc-bgp-linux

The rest of the configure options apply as usual e.g. --with-dcmf in this case.

Compiler Selection 
------------------

Unless otherwise noted you can try to overwrite the default compiler names
detected by configure by defining F77, CC, and CXX for Fortran (77), C, and C++
compilers, respectively.  Or when using the MPI compilers MPIF77, MPICC, and
MPICXX for MPI Fortran (77), C, and C++ compilers, respectively::

    configure F77=f90 CC=gcc
    configure MPIF77=mpif90 MPICC=mpicc

Although you can change the compiler at make-time it will likely fail.  Many
platform-specific compiler flags are detected at configure-time based on the
compiler selection. If changing compilers, we recommend rerunning configure as
above.

After Configuration
-------------------

By this point we assume you have successfully run configure either from the
base distribution directory or from a separate build directory (aka VPATH
build.)  You are now ready to run 'make'.  You can optionally run parallel
make using the "-j" option which significantly speeds up the build.  If using
the MPI compiler wrappers, occasionally using "-j" will cause build failures
because the MPI compiler wrapper creates a temporary symlink to the mpif.h
header.  In that case, you won't be able to use the "-j" option.  Further, the
influential environment variables used at configure-time can be overridden at
make-time in case problems are encountered.  For example::

    ./configure CFLAGS=-Wimplicit
    ...
    make CFLAGS="-Wimplicit -g -O0"

One particularly influential make variable is "V" which controls the verbosity
of the make output. This variable corresponds to the --dis/enable-silent-riles
configure-time option, but I often prefer the make-time variable::

    make V=0 (configure  --enable-silent-rules)
    make V=1 (configure --disable-silent-rules)

Test Programs
-------------

Running "make checkprogs" will build most test and example programs.  Note that
not all tests are built -- some tests depend on certain features being
detected or enabled during configure.  These programs are not intented to be
examples of good GA coding practices because they often include private
headers.  However, they help us debug or time our GA library.

Test Suite
++++++++++

Running "make check" will build most test and example programs (See "make
checkprogs" notes above) in addition to running the test suite.  The test
suite runs both the serial and parallel tests.  The test suite must know how
to launch the parallel tests via the MPIEXEC variable.  Please read your MPI
flavor's documentation on how to launch, or if using TCGMSG you will use the
"parallel" tool.  For example, the following is the command to launch the test
suite when compiled with OpenMPI::

    make check MPIEXEC="mpiexec -np 4"

All tests have a per-test log file containing the output of the test.  So if
the test is global/testing/test.x, the log file would be
global/testing/test.log.  The output of failed tests is collected in the
top-level log summary test-suite.log.

The test suite will recurse into the ARMCI directory and run the ARMCI test
suite first.  If the ARMCI test suite fails, the GA test suite will not run
(the assumption here is that you should fix bugs in the dependent library
first.)  To run only the GA test suite, type "make check-ga" with the
appropriate MPIEXEC variable.

How to Run GA Test Programs?  
----------------------------

Depends on the system. MPPs like Intel iPSC/860, Delta, Paragon, IBM SPx, Cray
T3/E have their own commands for submitting parallel jobs.

On workstations and clusters, GA are run like ordinary message-passing
programs::

  To run GA programs with MPI, you need to built the package to be compatible
  with MPI (see README in ./global and documentation in ./global/doc/ ) and
  run it as any other MPI program.  The GA package has been tested only with a
  limited number of MPI implementations (MPICH, and vendor's: Intel, IBM, Sun,
  HP, and SGI).

  TCGMSG `parallel' command (built automaticaly in ./tcgmsg/ipcv4.0/parallel
  if needed) is used to start a job on clusters if you are using TCGMSG as
  your message-passing library. On the workstations, GA-based programs that
  use TCGMSG can be run with a single process without the `parallel' command
  -- just by typing program name -- useful for debugging. 

Other Issues 
============

a. LINUX64 supports ALPHA, Itanium, Opteron, and Em64T processors only. 

b. The SGI_N32 version is recommended on all newer SGI boxes including
   the O2, Octane, Origin, Indigo2, and PowerChallenge systems
   unless the system has lots of memory and your program uses 
   huge arrays (>4GB) in which case 64-bit addressing is required
   (SGITFP version). In addition, TARGET_CPU environment
   variable can be used to choose the optimal compiler flags 
   for R8000 and R10000 processors.

c. In 64 bit platforms, if you are using blas libraries that takes
   integer as 8 bytes, then set the following environment variables:
   setenv BLAS_I8 yes
   setenv BLAS_LIB specify_your_blas_library
   e.g.setenv BLAS_LIB -L/usr/lib/libblas.a

d. To turn Async I/O on under Linux, set environment variable USE_LINUXAIO=y

Performance Tuning
------------------

global/src/gaconfig.h has a varible called AVOID_MA_STORAGE. If defined, this
variable forces GA to use ARMCI memory which can lead to better performance on
platforms on which memory needs to be registered for fast communication.

Setting an environment variable MA_USE_ARMCI_MEM forces MA library to use
ARMCI memory, communication via which can be faster on networks like GM, VIA
and InfiniBand.

About

Partitioned Global Address Space (PGAS) library for distributed arrays

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C 51.8%
  • Fortran 16.2%
  • Shell 10.2%
  • Makefile 7.0%
  • Python 5.6%
  • C++ 4.4%
  • Other 4.8%