Welcome to playback-proxy 👋

A proxy tool that records communication (requests, websockets) between client and server. This recording can later be used for tests as a mock backend. It works in 2 modes, RECORD and PLAYBACK, capturing and reproducing the server responses respectively.

Supported Features

• Record multiple calls to the same endpoint. These will be reproduced in the same order during PLAYBACK as they were requested.
• Record web socket events. These will be reproduced based on the last request and time before socket was received. This means that if the socket was received 2 seconds after a particular call in RECORD mode, during PLAYBACK it will be sent 2 seconds after that particular call is requested.
• Specify a list of endpoints that are recorded only once. Same response will be used during PLAYBACK for every call. See SAVE_SINGLE parameter in the .env file
• Specify a list of endpoints that are not printed to the log. See IGNORE_LOG parameter in the .env file

Unsupported (yet) Features

• Saving responses in any other format (json, plaintext) than binary
• Using https and wss protocols
• Support for HAR files as records
• Support for optional delay
• Any other ideas people might have

Install

git clone https://github.com/kaphacius/playback-proxy.git

Setup

Install all dependencies with

pip3 install -r requirements.txt

🚀 Usage

There are 2 modes of running the tool: RECORD and PLAYBACK.

• During RECORD, all communication between client and server is stored.
• Duruing PLAYBACK, the socket uses previously stored responses when being requested.

Firstly, set up an .env file with mandatory and optional parameters. Copy the and rename template.env to a desired name. Mandatory parameters:

• PROTOCOL - protocol used for communication (only http for now)
• ENDPOINT - the address of the server to which the proxy will connect to
• MODE - current mode. Can be changed later during when launching the proxy.
• RECORDS_PATH - relative path to where all of the recordings will be stored. Must exists before running.
• RECORDING - name of the current recording. This will be appended to RECORDS_PATH and a folder will be created to store saved data. Can be changed later when launching the proxy.

Make the starter script executable:

chmod +x proxy-starter.sh

Then, run the proxy in RECORD mode. Specify the name of the current recording RECORDING. This will create a folder (or use an existing one) where the responses will be saved. Set relative path to your specific .env file via PATH_TO_ENV_FILE. Specify address and port where the client will be connecting via PROXY_SERVER_ADDRESS and PROXY_PORT.

./proxy-starter.sh -m RECORD -r {RECORDING} -e {PATH_TO_ENV_FILE} -a {PROXY_SERVER_ADDRESS} -p {PROXY_PORT}

Perform necessary interactions with the backend and stop the proxy by pressing Ctrl+C.

Finally, run the proxy in PLAYBACK mode. Interact with the server the same way as during recording - receive the same responses.

./proxy-starter.sh -m PLAYBACK -r {RECORDING} -e {PATH_TO_ENV_FILE} -a {PROXY_SERVER_ADDRESS} -p {PROXY_PORT}

Author

👤 Yurii Zadoianchuk

• Github: @kaphacius

🤝 Contributing

Contributions, issues and feature requests are welcome!

Feel free to check issues page.

Show your support

Give a ⭐️ if this project helped you!

📝 License

Copyright © 2021 Yurii Zadoianchuk.

This project is MIT licensed.

---

This README was generated with ❤️ by readme-md-generator