Merged changes from IBPSA, issue1926 (#4011)

This has formatting changes, corrections to the documentation, and changes in instance names in Examples and Validation

Buildings/Fluid/Actuators/BaseClasses/ActuatorSignal.mo

@@ -123,7 +123,7 @@ for a description of the filter.
 August 26, 2024, by Michael Wetter:<br/>
 Implemented linear actuator travel dynamics.<br/>
 This is for <a href=\"https://github.com/lbl-srg/modelica-buildings/issues/3965\">Buildings, #3965</a> and
-for  <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/1926\">IBPSA, #1926</a>.
+for <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/1926\">IBPSA, #1926</a>.
 </li>
 <li>
 June 10, 2021, by Michael Wetter:<br/>
@@ -164,7 +164,7 @@ This is for
 </li>
 <li>
 March 24, 2017, by Michael Wetter:<br/>
-Renamed <code>filteredInput</code> to <code>use_strokeTime</code>.<br/>
+Renamed <code>filteredInput</code> to <code>use_inputFilter</code>.<br/>
 This is for
 <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/665\">#665</a>.
 </li>

Buildings/Fluid/Actuators/BaseClasses/PartialThreeWayValve.mo

@@ -156,7 +156,7 @@ This is for
 </li>
 <li>
 November 16, 2022, by Michael Wetter:<br/>
-Propagated parameter <code>strokeTime</code> to valves. The value is not used as the filter is disabled,
+Propagated parameter <code>riseTime</code> to valves. The value is not used as the filter is disabled,
 but it will show in the result file. Having a consistent value for all these parameters in the result filter
 helps during debugging.
 </li>
@@ -181,7 +181,7 @@ Improved icon graphics annotation. This is for
 </li>
 <li>
 March 24, 2017, by Michael Wetter:<br/>
-Renamed <code>filteredInput</code> to <code>use_strokeTime</code>.<br/>
+Renamed <code>filteredInput</code> to <code>use_inputFilter</code>.<br/>
 This is for
 <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/665\">#665</a>.
 </li>

Buildings/Fluid/Actuators/BaseClasses/PartialTwoWayValve.mo

@@ -124,7 +124,7 @@ Improved icon graphics annotation. This is for
 </li>
 <li>
 March 24, 2017, by Michael Wetter:<br/>
-Renamed <code>filteredInput</code> to <code>use_strokeTime</code>.<br/>
+Renamed <code>filteredInput</code> to <code>use_inputFilter</code>.<br/>
 This is for
 <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/665\">#665</a>.
 </li>

Buildings/Fluid/Actuators/BaseClasses/PartialTwoWayValveKv.mo

@@ -63,7 +63,7 @@ Removed icon graphics annotation. This is for
 </li>
 <li>
 March 24, 2017, by Michael Wetter:<br/>
-Renamed <code>filteredInput</code> to <code>use_strokeTime</code>.<br/>
+Renamed <code>filteredInput</code> to <code>use_inputFilter</code>.<br/>
 This is for
 <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/665\">#665</a>.
 </li>

Buildings/Fluid/Actuators/Dampers/MixingBox.mo

@@ -325,7 +325,7 @@ See <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/1050\">#1050</a>.
 </li>
 <li>
 March 24, 2017, by Michael Wetter:<br/>
-Renamed <code>filteredInput</code> to <code>use_strokeTime</code>.<br/>
+Renamed <code>filteredInput</code> to <code>use_inputFilter</code>.<br/>
 This is for
 <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/665\">#665</a>.
 </li>

Buildings/Fluid/Actuators/Motors/IdealMotor.mo

@@ -94,7 +94,7 @@ Buildings.Fluid.Actuators.UsersGuide</a>.
 <ul>
 <li>
 March 24, 2017, by Michael Wetter:<br/>
-Renamed <code>filteredInput</code> to <code>use_strokeTime</code>.<br/>
+Renamed <code>filteredInput</code> to <code>use_inputFilter</code>.<br/>
 This is for
 <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/665\">#665</a>.
 </li>

Buildings/Fluid/Actuators/Valves/TwoWayPressureIndependent.mo

@@ -263,7 +263,7 @@ See <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/156\">#156</a>.
 </li>
 <li>
 March 24, 2017, by Michael Wetter:<br/>
-Renamed <code>filteredInput</code> to <code>use_strokeTime</code>.<br/>
+Renamed <code>filteredInput</code> to <code>use_inputFilter</code>.<br/>
 This is for
 <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/665\">#665</a>.
 </li>

Buildings/Fluid/Actuators/Valves/Validation/ThreeWayValveParameterization.mo

@@ -24,7 +24,7 @@ model ThreeWayValveParameterization
       273.15 + 4,
       Medium.X_default) "Standard density";
 
-  Buildings.Fluid.Actuators.Valves.ThreeWayEqualPercentageLinear valOPPoi(
+  Buildings.Fluid.Actuators.Valves.ThreeWayEqualPercentageLinear valOpePoi(
     redeclare package Medium = Medium,
     m_flow_nominal=m_flow_nominal,
     CvData=Buildings.Fluid.Types.CvTypes.OpPoint,
@@ -84,17 +84,17 @@ model ThreeWayValveParameterization
     offset=0) "Control signal"
     annotation (Placement(transformation(extent={{-80,100},{-60,120}})));
 
-  Buildings.Fluid.Sensors.MassFlowRate senM_flowOpPoi(
+  Buildings.Fluid.Sensors.MassFlowRate senMasFloOpPoi(
     redeclare package Medium = Medium) "Mass flow rate sensor"
     annotation (Placement(transformation(extent={{20,80},{40,100}})));
-  Buildings.Fluid.Sensors.MassFlowRate senM_flowKv(
+  Buildings.Fluid.Sensors.MassFlowRate senMasFloKv(
     redeclare package Medium = Medium) "Mass flow rate sensor"
     annotation (Placement(transformation(extent={{20,20},{40,40}})));
-  Buildings.Fluid.Sensors.MassFlowRate senM_flowCv(
+  Buildings.Fluid.Sensors.MassFlowRate senMasFloCv(
     redeclare package Medium = Medium) "Mass flow rate sensor"
     annotation (Placement(transformation(extent={{20,-40},{40,-20}})));
 
-  Buildings.Fluid.Sensors.MassFlowRate senM_flowAv(redeclare package Medium =
+  Buildings.Fluid.Sensors.MassFlowRate senMasFloAv(redeclare package Medium =
         Medium) "Mass flow rate sensor"
     annotation (Placement(transformation(extent={{20,-94},{40,-74}})));
   Buildings.Fluid.Sources.Boundary_pT sou3(
@@ -105,39 +105,39 @@ model ThreeWayValveParameterization
     T=293.15) "Boundary condition for flow source"
     annotation (Placement(transformation(extent={{-70,-20},{-50,0}})));
 equation
-  connect(sou1.ports[1], valOPPoi.port_1) annotation (Line(points={{-48,33},{-32,
+  connect(sou1.ports[1], valOpePoi.port_1) annotation (Line(points={{-48,33},{-32,
           33},{-32,90},{-10,90}}, color={0,127,255}));
   connect(sou1.ports[2], valKv.port_1) annotation (Line(points={{-48,31},{-42,31},
           {-42,30},{-10,30}}, color={0,127,255}));
   connect(sou1.ports[3], valCv.port_1) annotation (Line(points={{-48,29},{-32,29},
           {-32,-30},{-10,-30}}, color={0,127,255}));
   connect(sou1.ports[4], valAv.port_1) annotation (Line(points={{-48,27},{-32,27},
           {-32,-84},{-10,-84}}, color={0,127,255}));
-  connect(sou3.ports[1], valOPPoi.port_3) annotation (Line(points={{-50,-7},{-20,
+  connect(sou3.ports[1], valOpePoi.port_3) annotation (Line(points={{-50,-7},{-20,
           -7},{-20,70},{0,70},{0,80}}, color={0,127,255}));
   connect(sou3.ports[2], valKv.port_3) annotation (Line(points={{-50,-9},{-20,-9},
           {-20,12},{0,12},{0,20}}, color={0,127,255}));
   connect(sou3.ports[3], valCv.port_3) annotation (Line(points={{-50,-11},{-20,-11},
           {-20,-48},{0,-48},{0,-40}}, color={0,127,255}));
   connect(sou3.ports[4], valAv.port_3) annotation (Line(points={{-50,-13},{-20,-13},
           {-20,-110},{0,-110},{0,-94}}, color={0,127,255}));
-  connect(valOPPoi.port_2, senM_flowOpPoi.port_a)
+  connect(valOpePoi.port_2, senMasFloOpPoi.port_a)
     annotation (Line(points={{10,90},{20,90}}, color={0,127,255}));
-  connect(valKv.port_2, senM_flowKv.port_a)
+  connect(valKv.port_2, senMasFloKv.port_a)
     annotation (Line(points={{10,30},{20,30}}, color={0,127,255}));
-  connect(valCv.port_2, senM_flowCv.port_a)
+  connect(valCv.port_2, senMasFloCv.port_a)
     annotation (Line(points={{10,-30},{20,-30}}, color={0,127,255}));
-  connect(valAv.port_2, senM_flowAv.port_a)
+  connect(valAv.port_2, senMasFloAv.port_a)
     annotation (Line(points={{10,-84},{20,-84}}, color={0,127,255}));
-  connect(senM_flowOpPoi.port_b, sin.ports[1]) annotation (Line(points={{40,90},
+  connect(senMasFloOpPoi.port_b, sin.ports[1]) annotation (Line(points={{40,90},
           {52,90},{52,92},{90,92},{90,3},{100,3}}, color={0,127,255}));
-  connect(senM_flowKv.port_b, sin.ports[2]) annotation (Line(points={{40,30},{76,
+  connect(senMasFloKv.port_b, sin.ports[2]) annotation (Line(points={{40,30},{76,
           30},{76,1},{100,1}}, color={0,127,255}));
-  connect(senM_flowCv.port_b, sin.ports[3]) annotation (Line(points={{40,-30},{90,
+  connect(senMasFloCv.port_b, sin.ports[3]) annotation (Line(points={{40,-30},{90,
           -30},{90,-1},{100,-1}}, color={0,127,255}));
-  connect(senM_flowAv.port_b, sin.ports[4]) annotation (Line(points={{40,-84},{92,
+  connect(senMasFloAv.port_b, sin.ports[4]) annotation (Line(points={{40,-84},{92,
           -84},{92,-3},{100,-3}}, color={0,127,255}));
-  connect(y.y, valOPPoi.y) annotation (Line(points={{-59,110},{0,110},{0,102}},
+  connect(y.y, valOpePoi.y) annotation (Line(points={{-59,110},{0,110},{0,102}},
                             color={0,0,127}));
   connect(y.y, valKv.y) annotation (Line(points={{-59,110},{-40,110},{-40,52},{0,
           52},{0,42}},

Buildings/Fluid/Actuators/Valves/Validation/TwoWayValveParameterization.mo

@@ -26,7 +26,7 @@ model TwoWayValveParameterization
       273.15 + 4,
       Medium.X_default) "Standard density";
 
-  Buildings.Fluid.Actuators.Valves.TwoWayLinear valOPPoi(
+  Buildings.Fluid.Actuators.Valves.TwoWayLinear valOpePoi(
     redeclare package Medium = Medium,
     m_flow_nominal=m_flow_nominal,
     CvData=Buildings.Fluid.Types.CvTypes.OpPoint,
@@ -66,13 +66,13 @@ model TwoWayValveParameterization
     T=293.15) "Boundary condition for flow sink"    annotation (Placement(
         transformation(extent={{90,-10},{70,10}})));
 
-  Buildings.Fluid.Sensors.MassFlowRate senM_flowOpPoi(
+  Buildings.Fluid.Sensors.MassFlowRate senMasFloOpPoi(
     redeclare package Medium = Medium) "Mass flow rate sensor"
     annotation (Placement(transformation(extent={{20,30},{40,50}})));
-  Buildings.Fluid.Sensors.MassFlowRate senM_flowKv(
+  Buildings.Fluid.Sensors.MassFlowRate senMasFloKv(
     redeclare package Medium = Medium) "Mass flow rate sensor"
     annotation (Placement(transformation(extent={{20,-10},{40,10}})));
-  Buildings.Fluid.Sensors.MassFlowRate senM_flowCv(
+  Buildings.Fluid.Sensors.MassFlowRate senMasFloCv(
     redeclare package Medium = Medium) "Mass flow rate sensor"
     annotation (Placement(transformation(extent={{20,-50},{40,-30}})));
   Valves.TwoWayLinear valAv(
@@ -82,11 +82,11 @@ model TwoWayValveParameterization
     CvData=Buildings.Fluid.Types.CvTypes.Av,
     Av=Av) "Valve model, linear opening characteristics"
     annotation (Placement(transformation(extent={{-10,-90},{10,-70}})));
-  Buildings.Fluid.Sensors.MassFlowRate senM_flowAv(redeclare package Medium =
+  Buildings.Fluid.Sensors.MassFlowRate senMasFloAv(redeclare package Medium =
         Medium) "Mass flow rate sensor"
     annotation (Placement(transformation(extent={{20,-90},{40,-70}})));
 equation
-  connect(y.y, valOPPoi.y)
+  connect(y.y, valOpePoi.y)
                          annotation (Line(
       points={{-39,70},{-20,70},{6.66134e-16,70},{6.66134e-16,52}},
       color={0,0,127}));
@@ -102,33 +102,33 @@ equation
   connect(y.y, valCv.y) annotation (Line(
       points={{-39,70},{-20,70},{-20,-20},{6.66134e-16,-20},{6.66134e-16,-28}},
       color={0,0,127}));
-  connect(sou.ports[1], valOPPoi.port_a) annotation (Line(
+  connect(sou.ports[1], valOpePoi.port_a) annotation (Line(
       points={{-50,-1.5},{-40,-1.5},{-40,40},{-10,40}},
       color={0,127,255}));
-  connect(valOPPoi.port_b, senM_flowOpPoi.port_a) annotation (Line(
+  connect(valOpePoi.port_b, senMasFloOpPoi.port_a) annotation (Line(
       points={{10,40},{20,40}},
       color={0,127,255}));
-  connect(valKv.port_b, senM_flowKv.port_a) annotation (Line(
+  connect(valKv.port_b, senMasFloKv.port_a) annotation (Line(
       points={{10,6.10623e-16},{12.5,6.10623e-16},{12.5,1.22125e-15},{15,
           1.22125e-15},{15,6.10623e-16},{20,6.10623e-16}},
       color={0,127,255}));
-  connect(valCv.port_b, senM_flowCv.port_a) annotation (Line(
+  connect(valCv.port_b, senMasFloCv.port_a) annotation (Line(
       points={{10,-40},{20,-40}},
       color={0,127,255}));
-  connect(senM_flowCv.port_b, sin.ports[3]) annotation (Line(
+  connect(senMasFloCv.port_b, sin.ports[3]) annotation (Line(
       points={{40,-40},{56,-40},{56,0.5},{70,0.5}},
       color={0,127,255}));
-  connect(senM_flowKv.port_b, sin.ports[2]) annotation (Line(
+  connect(senMasFloKv.port_b, sin.ports[2]) annotation (Line(
       points={{40,0},{50,0},{50,-0.5},{70,-0.5}},
       color={0,127,255}));
-  connect(senM_flowOpPoi.port_b, sin.ports[1]) annotation (Line(
+  connect(senMasFloOpPoi.port_b, sin.ports[1]) annotation (Line(
       points={{40,40},{60,40},{60,2},{66,2},{66,-1.5},{70,-1.5}},
       color={0,127,255}));
   connect(sou.ports[4], valAv.port_a) annotation (Line(points={{-50,1.5},{-40,1.5},
           {-40,-80},{-10,-80}}, color={0,127,255}));
-  connect(valAv.port_b, senM_flowAv.port_a)
+  connect(valAv.port_b, senMasFloAv.port_a)
     annotation (Line(points={{10,-80},{20,-80}}, color={0,127,255}));
-  connect(senM_flowAv.port_b, sin.ports[4]) annotation (Line(points={{40,-80},{60,
+  connect(senMasFloAv.port_b, sin.ports[4]) annotation (Line(points={{40,-80},{60,
           -80},{60,1.5},{70,1.5}},  color={0,127,255}));
   connect(valAv.y, y.y) annotation (Line(points={{0,-68},{0,-60},{-20,-60},{-20,
           70},{-39,70}}, color={0,0,127}));

Buildings/Fluid/Actuators/package.mo

@@ -102,12 +102,12 @@ or damper position is equal to the input signal <code>y</code>.
 If <code>use_strokeTime=true</code>, then the actual valve or damper position
 changes linear in time until it reaches the control input.
 The parameter <code>strokeTime</code>, which by default is set to
-<i>120</i> seconds, determines how fast the speed changes.
+<i>120</i> seconds, determines how fast the position changes.
 For example, if <code>strokeTime=120</code> seconds and the current actuator position is <i>0</i>, then
 a step change in the actuator input signal from <i>0</i> to <i>1</i> will
 cause the actuator position to change linearly from <i>0</i> to <i>1</i> within
-<i>30</i> seconds. Similarly, if the actuator position is then reduced by changing
-the input signal from <i>1</i> to <i>0.5</i>, it will take <i>15</i> seconds
+<i>120</i> seconds. Similarly, if the actuator position is then reduced by changing
+the input signal from <i>1</i> to <i>0.5</i>, it will take <i>60</i> seconds
 to achieve the new set point.
 </li>
 </ul>

Buildings/Fluid/Movers/BaseClasses/PartialFlowMachine.mo

@@ -61,8 +61,7 @@ partial model PartialFlowMachine
       enable=use_riseTime));
   parameter Modelica.Blocks.Types.Init init=Modelica.Blocks.Types.Init.InitialOutput
     "Type of initialization (no init/steady state/initial state/initial output)"
-    annotation(Dialog(tab="Dynamics", group="Motor speed",
-    enable=use_riseTime));
+    annotation(Dialog(tab="Dynamics", group="Motor speed", enable=use_riseTime));
 
   // Connectors and ports
   Modelica.Blocks.Interfaces.IntegerInput stage
@@ -240,7 +239,7 @@ protected
     initType=init,
     strict=true)
     if use_riseTime
-      "Dynamics of engine speed"
+      "Dynamics of motor speed"
     annotation (Placement(transformation(extent={{20,60},{40,80}})));
 
   Buildings.Fluid.Movers.BaseClasses.IdealSource preSou(
@@ -644,9 +643,8 @@ revisions="<html>
 August 26, 2024, by Michael Wetter:<br/>
 Implemented linear dynamics for change in motor speed.<br/>
 This is for <a href=\"https://github.com/lbl-srg/modelica-buildings/issues/3965\">Buildings, #3965</a> and
-for  <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/1926\">IBPSA, #1926</a>.
+for <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/1926\">IBPSA, #1926</a>.
 </li>
-
 <li>
 June 18, 2024, by Michael Wetter:<br/>
 Added <code>start</code> and <code>nominal</code> attributes
@@ -723,7 +721,7 @@ This is for
 </li>
 <li>
 March 24, 2017, by Michael Wetter:<br/>
-Renamed <code>filteredSpeed</code> to <code>use_riseTime</code>.<br/>
+Renamed <code>filteredSpeed</code> to <code>use_inputFilter</code>.<br/>
 This is for
 <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/665\">#665</a>.
 </li>

Buildings/Fluid/Movers/Examples/MoverParameter.mo

@@ -28,8 +28,9 @@ model MoverParameter
     annotation (Placement(transformation(extent={{80,-10},{60,10}})));
   Buildings.Fluid.Movers.SpeedControlled_y pump_y(
     redeclare package Medium = Medium,
-    redeclare Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to4 per(speeds=
-          {0,0.5,1}, constantSpeed=1),
+    redeclare Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to4 per(
+      speeds={0,0.5,1},
+      constantSpeed=1),
     use_riseTime=false,
     inputType=Buildings.Fluid.Types.InputType.Constant,
     energyDynamics=Modelica.Fluid.Types.Dynamics.SteadyState)

Buildings/Fluid/Movers/Examples/SpeedControlled_y_pumpCurves.mo

@@ -17,8 +17,9 @@ model SpeedControlled_y_pumpCurves
       redeclare package Medium = Medium,
       use_riseTime=false,
       energyDynamics=Modelica.Fluid.Types.Dynamics.SteadyState,
-      per(pressure(V_flow=2/1000*m_flow_nominal*{0.2,0.4,0.6,0.8}, dp=
-              dp_nominal*{0.9,0.85,0.6,0.2})))
+      per(pressure(
+        V_flow=2/1000*m_flow_nominal*{0.2,0.4,0.6,0.8},
+        dp=dp_nominal*{0.9,0.85,0.6,0.2})))
     "Declaration of pump model";
 
   pumpModel pum(

Buildings/Fluid/Movers/FlowControlled_dp.mo

@@ -16,20 +16,23 @@ model FlowControlled_dp
       y(final unit="Pa", nominal=dp_nominal)),
     eff(per(
         final pressure=if per.havePressureCurve then per.pressure else
-            Buildings.Fluid.Movers.BaseClasses.Characteristics.flowParameters(
-            V_flow={i/(nOri - 1)*2.0*m_flow_nominal/rho_default for i in 0:(
-              nOri - 1)},
+          Buildings.Fluid.Movers.BaseClasses.Characteristics.flowParameters(
+            V_flow={i/(nOri - 1)*2.0*m_flow_nominal/rho_default for i in 0:(nOri - 1)},
             dp={i/(nOri - 1)*2.0*dp_nominal for i in (nOri - 1):-1:0}),
         final etaHydMet=if (per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate
-             or per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber)
-             and not per.havePressureCurve then Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.NotProvided
-             else per.etaHydMet,
+          or per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber)
+          and not per.havePressureCurve then
+            Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.NotProvided
+          else
+            per.etaHydMet,
         final etaMotMet=if (per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio
-             or per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve)
-             and (not per.haveWMot_nominal and not per.havePressureCurve) then
+          or per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve)
+          and (not per.haveWMot_nominal and not per.havePressureCurve) then
             Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.NotProvided
-             else per.etaMotMet), r_N(start=if abs(dp_nominal) > 1E-8 then
-            dp_start/dp_nominal else 0)));
+          else per.etaMotMet), r_N(start=if abs(dp_nominal) > 1E-8 then
+            dp_start/dp_nominal
+          else
+            0)));
 
   parameter Modelica.Units.SI.PressureDifference dp_start(
     min=0,
@@ -173,7 +176,7 @@ Buildings.Fluid.Movers.Validation.FlowControlled_dpSystem</a>.
 August 26, 2024, by Michael Wetter:<br/>
 Implemented linear dynamics for change in motor speed.<br/>
 This is for <a href=\"https://github.com/lbl-srg/modelica-buildings/issues/3965\">Buildings, #3965</a> and
-for  <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/1926\">IBPSA, #1926</a>.
+for <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/1926\">IBPSA, #1926</a>.
 </li>
 <li>
 March 1, 2023, by Hongxiang Fu:<br/>
@@ -221,7 +224,7 @@ This is for
 </li>
 <li>
 March 24, 2017, by Michael Wetter:<br/>
-Renamed <code>filteredSpeed</code> to <code>use_riseTime</code>.<br/>
+Renamed <code>filteredSpeed</code> to <code>use_inputFilter</code>.<br/>
 This is for
 <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/665\">#665</a>.
 </li>