Update generic-mks-gen-l-v1.cfg

MKS Gen l/generic-mks-gen-l-v1.cfg

@@ -9,7 +9,7 @@ rotation_distance: 40   ##rotation_distance = ((360°/1.8°) * microsteps) / 80
 endstop_pin:^PE5 #X-Min, PE4:X-Max
 position_endstop: 0
 position_max: 235
-homing_speed: 30
+homing_speed: 50
 
 [stepper_y]
 step_pin: PF6
@@ -20,7 +20,7 @@ rotation_distance: 40
 endstop_pin: ^PJ1  #Y-Min, PJ0:Y-Max
 position_endstop: 0
 position_max: 235
-homing_speed: 30
+homing_speed: 50
 
 [stepper_z]
 step_pin: PL3
@@ -38,18 +38,18 @@ step_pin: PA4
 dir_pin: !PA6
 enable_pin: !PA2
 microsteps: 16
-rotation_distance: 33.500
+rotation_distance: 33.683
 nozzle_diameter: 0.4
 filament_diameter: 1.750
 heater_pin: PB4
-sensor_type: ATC Semitec 104GT-2
+sensor_type: EPCOS 100K B57560G104F
 sensor_pin: PK5
 min_temp: 0
 max_temp: 250
 control: pid
-pid_Kp: 22.2
-pid_Ki: 1.08
-pid_Kd: 114
+pid_Kp: 21.73
+pid_Ki: 1.54
+pid_Kd: 76.55
 
 #[extruder1]
 #step_pin: PC1
@@ -61,21 +61,69 @@ pid_Kd: 114
 
 [heater_bed]
 heater_pin: PH5
-sensor_type: ATC Semitec 104GT-2
+sensor_type: EPCOS 100K B57560G104F
 sensor_pin: PK6
 min_temp: 0
 max_temp: 130
 control: pid
-pid_Kp: 325.10
-pid_Ki: 63.35
-pid_Kd: 417.10
+pid_Kp: 54.027
+pid_Ki: 0.770
+pid_Kd: 948.182
 
 [fan]
 pin: PH6
 
 [mcu]
 serial:/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
 
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[bed_screws]
+screw1: 30.5, 37
+screw2: 30.5, 207
+screw3: 204.5, 207
+screw4: 204.5, 37
+
+[display]
+lcd_type: st7920
+cs_pin: EXP1_7
+sclk_pin: EXP1_6
+sid_pin: EXP1_8
+encoder_pins: ^EXP1_5, ^EXP1_3
+click_pin: ^!EXP1_2
+
+[output_pin beeper]
+pin: EXP1_1
+
+########################################
+# TMC2208 configuration
+########################################
+
+[tmc2208 stepper_x]
+uart_pin: PK1
+run_current: 0.800
+stealthchop_threshold: 999999
+
+[tmc2208 stepper_y]
+uart_pin: PK2
+run_current: 0.800
+stealthchop_threshold: 999999
+
+[tmc2208 stepper_z]
+uart_pin: PK3
+run_current: 0.650
+stealthchop_threshold: 999999
+
+[tmc2208 extruder]
+uart_pin: PK4
+run_current: 0.800
+stealthchop_threshold: 999999
+
 ########################################
 # TMC UART configuration
 ########################################
@@ -128,15 +176,6 @@ serial:/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
 #stealthchop_threshold: 0
 
 
-[printer]
-kinematics: cartesian
-max_velocity: 200
-max_accel: 1500
-max_z_velocity: 10
-max_z_accel: 500
-square_corner_velocity: 10.0
-
-
 ########################################
 # EXP1 / EXP2 (display) pins
 ########################################
@@ -151,37 +190,24 @@ aliases:
     EXP2_2=PB1, EXP2_4=PB0, EXP2_6=PB2, EXP2_8=PG0, EXP2_10=<NC>
     # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "ssp1"
 # See the MKS Lcd Config path file for definitions of common LCD displays.
-[include mks_lcd_12864.cfg]
-
-[virtual_sdcard]
-path: ~/gcode_files
-
-[pause_resume]
-
-[gcode_macro CANCEL_PRINT]
-description: Cancel the actual running print
-rename_existing: CANCEL_PRINT_BASE
-gcode:
-  TURN_OFF_HEATERS
-  CANCEL_PRINT_BASE
 
 
 [display_status]
 
-#[bltouch]
-#sensor_pin: ^PD2
-#control_pin:PB5
-#x_offset: -44
-#y_offset: -14
-#z_offset: 3.099
-#speed: 10.0
-#samples: 2
-#samples_result: median
-#sample_retract_dist: 3.0
-#samples_tolerance: 0.1
-#samples_tolerance_retries: 1
-
-#[safe_z_home]
+[bltouch]
+sensor_pin: ^PD2
+control_pin:PB5
+x_offset: 10
+y_offset: 10
+z_offset: 0
+speed: 10.0
+samples: 2
+samples_result: median
+sample_retract_dist: 3.0
+samples_tolerance: 0.1
+samples_tolerance_retries: 1
+
+[safe_z_home]
 #home_xy_position: 100,100 # Change coordinates to the center of your print bed
 #speed: 50
 #z_hop: 10                 # Move up 10mm