Skip to content

makerplane/FIX-Gateway

Repository files navigation

Website snapcraft.io

FIX Gateway

Copyright (c) 2014 Phil Birkelbach

FIX stands for Flight Information eXchange. It is a set of specifications, protocols and documentation for use in exchanging flight related information easily and reliably.

Fix Gateway is a program that abstracts this flight information and allows communication between different technologies.

The primary use is as the interface to the pyEfis electronic flight information project. It can also be used to interface flight simulator software to 'real' hardware such as instrumentation or custom flight controls.

Installation

Begin by cloning the Git repository

git clone [email protected]:makerplane/FIX-Gateway.git fixgw

or

git clone https://github.com/makerplane/FIX-Gateway.git fixgw

Then run one of the two helper scripts.

./fixgw.py
./fixgwc.py

These will run the client and the server respectively.

The configuration files are in the fixgw/config directory.

If you'd like to install the program permanently to your system or into a virtualenv you can issue the command...

sudo pip3 install .

from the root directory of the source repository. Caution This feature is still in development and may not work consistently.

Requirements

The only dependencies for FIX Gateway are Python itself and pyyaml. If you used pip3 to install FIX Gateway the dependencies should have been installed automatically. FIX Gateway requires Python 3.6 and should run on versions of Python higher than 3.6. It may run on versionso of Python 2.x but Python 2.x support is deprecated and it's expected that FIX Gateway will eventually stop working with these older versions of Python.

Many of the plugins will require other dependencies. See the individual plugin documentation for information about those. We'll discuss some of the more common ones.

Under Ubuntu distibutions socketcan can be installed with: apt install can-utils Some background on linux can can be found here: https://elinux.org/Bringing_CAN_interface_up To bring up the vcan0 interface: ` $ modprobe vcan $ sudo ip link add dev vcan0 type vcan $ sudo ip link set up vcan0 `

If you intend to use the gui plugin you will also need PyQt installed. Note that if you use pyEfis then PyQt is required. FixGW should work with either PyQt4 or PyQt5, however support for PyQT4 is likely to be dropped. Consult the PyQt documentation on how to install PyQt on your system. Typically it is

sudo apt-get install python3-pyqt5

The canfix plugin will require both the python-can package as well as the python-canfix package. Installing the python-canfix package with pip3 should install both.

sudo pip3 install python-canfix

About

Flight Information eXchange Gateway

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages