DashboardBuilders

Introduction

Builders that are managed by the coordinator (VMs running on GCE or reverse buildlets, such as the new OS X builders) are listed here:

http://farmer.golang.org/builders

For design details about the coordinator, see http://golang.org/s/builderplan

Older-style builders are listed below. These builders are configured and run manually. The goal is to migrate as many as possible over to the new system.

title	description	owner	notes
linux-arm64-canonical	ARMv8	@davecheney	Ubuntu 14.04
linux-arm64-linaro	ARMv8	@davecheney	Ubuntu 14.04.2
linux-ppc64le-canonical	POWER8 little endian	@davecheney	Ubuntu 14.04
android-arm-crawshaw	Nexus 7	crawshaw	Builder runs on attached desktop, uses adb
darwin-amd64	2011 Mac Mini, 2.4Ghz Core i5	adg	Mac OS X 10.6 (10K549)
darwin-amd64-cheney	2011 Mac Mini, 2.4Ghz Core i5	Dave Cheney	Mac OS X 10.10 XCode 5
darwin-amd64-race-cheney	2011 Mac Mini, 2.4Ghz Core i5	Dave Cheney	Mac OS X 10.10 XCode 5
darwin-386	2011 Mac Mini, 2.4Ghz Core i5	adg	Mac OS X 10.6 (10K549)
darwin-386-cheney	2011 Mac Mini, 2.4Ghz Core i5	Dave Cheney	Mac OS X 10.10 XCode 5
dragonfly-amd64	?	Justin Sherrill	?
freebsd-arm-paulzhol	Cubiboard2 1Gb RAM dual-core Cortex-A7 (Allwiner A20)	Yuval Pavel Zholkover	FreeBSD 11 r299674 with NODEBUG kernel (w/o INVARIANTS, WITNESS, DEADLKRES)
linux-arm-luitvd	RaspberryPi	Luit van Drongelen
linux-arm-arm5	QNAP TS-119P, ARMv5 @ 2.0GHz, 512MB	Dave Cheney	GOARM=5
linux-arm-cheney-imx6	Solidrun Cubox-i, quad core Cortex-A9 ~ 1Ghz, 2Gb ram	Dave Cheney	Runs arch linux, iMX6 boards need 3.10.x or above to pass the build reliably
linux-ppc64	KVM instance on physical 8-core POWER7 pSeries. Chip rev: 2.1 (pvr 004b 0201)	bradfitz, rsc
linux-ppc64-minux	Gentoo on PowerMac G5 (dual 2.7GHz ppc970fx)	minux	Disabled, Go doesn't support ppc970 anymore
linux-mips64le-cherry	Gentoo on Loongson 2F 800MHz, 1GB DDR2	cherry	builds sharded on three machines
linux-mips64le-stitch	Cavium Octeon II CN6880, 32-core @ 1GHz, 8GB RAM	Ed Swierk	Debian sid, no FPU
linux-mips64-minux	Gentoo on EdgeRouter Lite, 500MHz dual core MIPS64r2, 512MB	minux
nacl-arm	samsung chromebook	rsc	running chrubuntu
nacl-arm-cheney	same builder as linux-arm-cheney-imx6	Dave Cheney
netbsd-386-minux	KVM	minux
netbsd-amd64-bsiegert	EC2 m1.small VM	Benny Siegert	on Brad's work EC2 account
openbsd-arm	SolidRun CuBox-i4Pro, ARM Cortex A9 R2 792 MHz, 2GB RAM	Joel Sing
plan9-386-ducolombier	Intel Core 2 Quad Q8200 2.33 GHz, 6GB	David du Colombier	Plan 9 from Bell Labs
plan9-arm	Raspberry Pi 3 Model B	David du Colombier	Plan 9 from Bell Labs
plan9-amd64-9front	VM	David du Colombier	9front
solaris-amd64-smartos	E5-1650 Xeon, 6C/12T	Daniel Malon	runs illumos (smartos zone); dfc, aram have full access
solaris-amd64-solaris11	VM	Dave Cheney	runs Solaris 11

Builder Requirements

• internet connection (at least be able to access Google and http://build.golang.org)
• preferably with two or more (V)CPUs, as at least one test (sync/atomic requires runtime.NumCPU() > 1 to test more completely)
• at least 512MiB of memory (1GB or more highly recommended. 512MB might need a small GOGC setting to avoid thrashing.)

Restrictions

• The combination of Ubuntu 11.10 or 12.04 OMAP4 kernel and pandaboard (ES) have proven unstable as builders. See issue 4305. Make sure you have updated to the latest available 12.04.2 release.

How to set up a builder

1. obtain a hash from Go team members, and put that in ~/.gobuildkey
2. go get golang.org/x/build/cmd/builder
3. builder YOUR_BUILDER_NAME

Special notes

• Please make sure you've installed root certificates and that it's accessible to Go programs. For example, on NetBSD, you will need to install security/mozilla-rootcerts.
• If your builder runs Unix, please install perl, as tests for go.tools/cmd/vet need it.
• Raise ulimits on Unix: thread count (-r), nofiles (-n, 1024 should be fine)