mute rad core

applications/nrf_desktop/Kconfig.sysbuild

@@ -29,4 +29,7 @@ config SECURE_BOOT_APPCORE
 config PM_EXTERNAL_FLASH_MCUBOOT_SECONDARY
 	default y if BOARD_NRF52840DK_NRF52840
 
+config SUIT_ENVELOPE
+	default y if BOARD_NRF54H20DK
+
 source "${ZEPHYR_BASE}/share/sysbuild/Kconfig"

applications/nrf_desktop/configuration/nrf54h20dk_nrf54h20_cpuapp/app.overlay

@@ -52,3 +52,18 @@
 		};
 	};
 };
+
+&cpuapp_rw_partitions {
+		dfu_partition: partition@13c000 {
+			label = "dfu_partition";
+			reg = <0x13c000 DT_SIZE_K(676)>;
+		};
+};
+
+&cpusec_cpuapp_ipc {
+	status = "okay";
+};
+
+&cpusec_bellboard {
+	status = "okay";
+};

applications/nrf_desktop/configuration/nrf54h20dk_nrf54h20_cpuapp/prj.conf

@@ -107,3 +107,30 @@ CONFIG_LOG_MODE_DEFERRED=y
 CONFIG_LOG_PRINTK=y
 CONFIG_LOG_BUFFER_SIZE=4096
 CONFIG_LOG_PROCESS_THREAD_STACK_SIZE=1024
+
+# Enable MCUmgr Bluetooth transport
+CONFIG_DESKTOP_DFU_MCUMGR_ENABLE=y
+CONFIG_MCUMGR_TRANSPORT_BT=y
+CONFIG_MCUMGR_TRANSPORT_BT_AUTHEN=n
+
+# Allow for large Bluetooth data packets.
+CONFIG_BT_L2CAP_TX_MTU=498
+CONFIG_BT_BUF_ACL_RX_SIZE=502
+CONFIG_BT_BUF_ACL_TX_SIZE=251
+
+# Enable the MCUmgr Packet Reassembly feature over Bluetooth and its configuration dependencies.
+# MCUmgr buffer size is optimized to fit one SMP packet divided into five Bluetooth Write Commands,
+# transmitted with the maximum possible MTU value: 498 bytes.
+CONFIG_MCUMGR_TRANSPORT_BT_REASSEMBLY=y
+CONFIG_MCUMGR_TRANSPORT_NETBUF_SIZE=2475
+CONFIG_MCUMGR_TRANSPORT_WORKQUEUE_STACK_SIZE=4096
+
+# Allow a DFU host to retrieve information about the number and size of MCUmgr buffers.
+# The nRF Connect Device Manager uses this information to speed up the DFU.
+CONFIG_MCUMGR_GRP_OS_MCUMGR_PARAMS=y
+
+################################################################################
+# DFU configuration
+
+CONFIG_SUIT=y
+CONFIG_SUIT_DFU_CANDIDATE_PROCESSING_MINIMAL=y

applications/nrf_desktop/configuration/nrf54h20dk_nrf54h20_cpuapp/prj_release.conf

@@ -87,3 +87,30 @@ CONFIG_BT_CONN_TX_MAX=4
 CONFIG_SERIAL=n
 CONFIG_CONSOLE=n
 CONFIG_UART_CONSOLE=n
+
+# Enable MCUmgr Bluetooth transport
+CONFIG_DESKTOP_DFU_MCUMGR_ENABLE=y
+CONFIG_MCUMGR_TRANSPORT_BT=y
+CONFIG_MCUMGR_TRANSPORT_BT_AUTHEN=n
+
+# Allow for large Bluetooth data packets.
+CONFIG_BT_L2CAP_TX_MTU=498
+CONFIG_BT_BUF_ACL_RX_SIZE=502
+CONFIG_BT_BUF_ACL_TX_SIZE=251
+
+# Enable the MCUmgr Packet Reassembly feature over Bluetooth and its configuration dependencies.
+# MCUmgr buffer size is optimized to fit one SMP packet divided into five Bluetooth Write Commands,
+# transmitted with the maximum possible MTU value: 498 bytes.
+CONFIG_MCUMGR_TRANSPORT_BT_REASSEMBLY=y
+CONFIG_MCUMGR_TRANSPORT_NETBUF_SIZE=2475
+CONFIG_MCUMGR_TRANSPORT_WORKQUEUE_STACK_SIZE=4096
+
+# Allow a DFU host to retrieve information about the number and size of MCUmgr buffers.
+# The nRF Connect Device Manager uses this information to speed up the DFU.
+CONFIG_MCUMGR_GRP_OS_MCUMGR_PARAMS=y
+
+################################################################################
+# DFU configuration
+
+CONFIG_SUIT=y
+CONFIG_SUIT_DFU_CANDIDATE_PROCESSING_MINIMAL=y

applications/nrf_desktop/configuration/nrf54h20dk_nrf54h20_cpurad/images/ipc_radio/prj.conf

@@ -59,3 +59,7 @@ CONFIG_THREAD_NAME=y
 
 CONFIG_IPC_RADIO_BT=y
 CONFIG_IPC_RADIO_BT_HCI_IPC=y
+
+# Allow for large Bluetooth data packets.
+CONFIG_BT_BUF_ACL_RX_SIZE=502
+CONFIG_BT_BUF_ACL_TX_SIZE=251

applications/nrf_desktop/configuration/nrf54h20dk_nrf54h20_cpurad/images/ipc_radio/prj_release.conf

@@ -46,3 +46,7 @@ CONFIG_UART_CONSOLE=n
 
 CONFIG_IPC_RADIO_BT=y
 CONFIG_IPC_RADIO_BT_HCI_IPC=y
+
+# Allow for large Bluetooth data packets.
+CONFIG_BT_BUF_ACL_RX_SIZE=502
+CONFIG_BT_BUF_ACL_TX_SIZE=251

applications/nrf_desktop/src/modules/Kconfig.dfu_mcumgr

@@ -9,20 +9,15 @@ menuconfig DESKTOP_DFU_MCUMGR_ENABLE
 	select EXPERIMENTAL
 	select CAF_BLE_SMP_TRANSFER_EVENTS if MCUMGR_TRANSPORT_BT
 	select MCUMGR
-	select MCUMGR_GRP_IMG
 	select MCUMGR_GRP_OS
 	select MCUMGR_MGMT_NOTIFICATION_HOOKS
-	select MCUMGR_GRP_IMG_MUTEX if DESKTOP_DFU_LOCK
 	select MCUMGR_SMP_COMMAND_STATUS_HOOKS
-	select NET_BUF
-	select ZCBOR
 	select CRC
-	select IMG_MANAGER
-	select MCUBOOT_BOOTUTIL_LIB
-	select STREAM_FLASH
-	select FLASH_MAP
+	select NET_BUF
 	select FLASH
-	depends on BOOTLOADER_MCUBOOT
+	select FLASH_MAP
+	select ZCBOR
+
 	help
 	  This option enables an alternative method of performing DFU using the
 	  MCUmgr module.
@@ -43,6 +38,35 @@ config DESKTOP_DFU_MCUMGR_MCUBOOT_DIRECT_XIP
 	  boots the image with a higher version. The module does not confirm the
 	  newly updated image after a successful boot.
 
+choice DESKTOP_DFU_MCUMGR_BACKEND
+	prompt "Choose DFU backend"
+	default DESKTOP_DFU_BACKEND_MCUBOOT if BOOTLOADER_MCUBOOT
+	default DESKTOP_DFU_BACKEND_SUIT if SUIT
+
+config DESKTOP_DFU_BACKEND_MCUBOOT
+	bool "Use MCUboot as DFU backend"
+	select MCUBOOT_BOOTUTIL_LIB
+	select IMG_MANAGER
+	select MCUMGR_GRP_IMG
+	select MCUMGR_GRP_IMG_MUTEX if DESKTOP_DFU_LOCK
+	select STREAM_FLASH
+	depends on BOOTLOADER_MCUBOOT
+	help
+	  This option enables the MCUboot bootloader as the backend for the MCUmgr DFU module.
+
+config DESKTOP_DFU_BACKEND_SUIT
+	bool "Use SUIT as DFU backend"
+	select MCUMGR_SMP_LEGACY_RC_BEHAVIOUR
+	select MGMT_SUITFU
+	select MGMT_SUITFU_GRP_SUIT
+	select SSF_SUIT_SERVICE_ENABLED
+	select ZCBOR_CANONICAL
+	depends on SUIT
+	help
+	  This option enables the SUIT as the backend for the MCUmgr DFU module.
+
+endchoice
+
 module = DESKTOP_DFU_MCUMGR
 module-str = DFU MCUmgr
 source "subsys/logging/Kconfig.template.log_config"

applications/nrf_desktop/src/modules/dfu_mcumgr.c

@@ -4,8 +4,16 @@
  * SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
  */
 
+#include <zephyr/kernel.h>
+
+#if defined CONFIG_DESKTOP_DFU_BACKEND_MCUBOOT
 #include <zephyr/dfu/mcuboot.h>
 #include <zephyr/mgmt/mcumgr/grp/img_mgmt/img_mgmt.h>
+#elif defined CONFIG_DESKTOP_DFU_BACKEND_SUIT
+#include <sdfw/sdfw_services/suit_service.h>
+#include "desktop_suit.h"
+#endif
+
 #include <zephyr/mgmt/mcumgr/grp/os_mgmt/os_mgmt.h>
 #include <zephyr/mgmt/mcumgr/mgmt/callbacks.h>
 #include <zephyr/sys/math_extras.h>
@@ -37,7 +45,11 @@ static void dfu_lock_owner_changed(const struct dfu_lock_owner *new_owner)
 	/* The function declaration is not included in MCUmgr's header file if the mutex locking
 	 * of the image management state object is disabled.
 	 */
+#if defined CONFIG_DESKTOP_DFU_BACKEND_MCUBOOT
 	img_mgmt_reset_upload();
+#elif defined CONFIG_DESKTOP_DFU_BACKEND_SUIT
+	suit_dfu_cleanup();
+#endif
 #endif /* CONFIG_DESKTOP_DFU_LOCK */
 }
 
@@ -110,6 +122,36 @@ static struct mgmt_callback cmd_recv_cb = {
 	.event_id = MGMT_EVT_OP_CMD_RECV,
 };
 
+#if CONFIG_DESKTOP_DFU_BACKEND_MCUBOOT
+static void dfu_backend_init(void)
+{
+	if (!IS_ENABLED(CONFIG_DESKTOP_DFU_MCUMGR_MCUBOOT_DIRECT_XIP)) {
+		int err = boot_write_img_confirmed();
+
+		if (err) {
+			LOG_ERR("Cannot confirm a running image: %d", err);
+		}
+	}
+
+	LOG_INF("MCUboot image version: %s", CONFIG_MCUBOOT_IMGTOOL_SIGN_VERSION);
+}
+#elif CONFIG_DESKTOP_DFU_BACKEND_SUIT
+static void dfu_backend_init(void)
+{
+	unsigned int seq_num = 0;
+
+	int err = suit_get_installed_manifest_seq_num(&seq_num);
+
+	if (!err) {
+		LOG_INF("SUIT sequence number: %d", seq_num);
+	} else {
+		LOG_ERR("suit_read_manifest_data failed (err: %d)", err);
+	}
+}
+#else
+#error "The DFU backend choice is not supported"
+#endif /* CONFIG_DESKTOP_DFU_BACKEND_MCUBOOT */
+
 static bool app_event_handler(const struct app_event_header *aeh)
 {
 	if (IS_ENABLED(CONFIG_MCUMGR_TRANSPORT_BT) &&
@@ -127,15 +169,8 @@ static bool app_event_handler(const struct app_event_header *aeh)
 			cast_module_state_event(aeh);
 
 		if (check_state(event, MODULE_ID(main), MODULE_STATE_READY)) {
-			if (!IS_ENABLED(CONFIG_DESKTOP_DFU_MCUMGR_MCUBOOT_DIRECT_XIP)) {
-				int err = boot_write_img_confirmed();
-
-				if (err) {
-					LOG_ERR("Cannot confirm a running image: %d", err);
-				}
-			}
+			dfu_backend_init();
 
-			LOG_INF("MCUboot image version: %s", CONFIG_MCUBOOT_IMGTOOL_SIGN_VERSION);
 			k_work_init_delayable(&dfu_timeout, dfu_timeout_handler);
 
 			mgmt_callback_register(&cmd_recv_cb);

applications/nrf_desktop/src/util/CMakeLists.txt

@@ -20,6 +20,9 @@ endif()
 target_sources_ifdef(CONFIG_DESKTOP_ADV_PROV_UUID16_ALL
 		     app PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}/bt_le_adv_prov_uuid16.c)
 
+         target_sources_ifdef(CONFIG_DESKTOP_DFU_BACKEND_SUIT
+		     app PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}/desktop_suit.c)
+
 target_sources_ifdef(CONFIG_DESKTOP_DFU_LOCK
 		     app PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}/dfu_lock.c)
 

applications/nrf_desktop/src/util/desktop_suit.c

@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2024 Nordic Semiconductor ASA
+ *
+ * SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+ */
+
+#include <zephyr/kernel.h>
+#include "desktop_suit.h"
+#include <sdfw/sdfw_services/suit_service.h>
+
+int suit_get_installed_manifest_seq_num(unsigned int *seq_num)
+{
+	/* Manifest class ID
+	 * nRF Desktop uses default SUIT manifest file (default namespace and name).
+	 */
+	const suit_manifest_class_id_t manifest_class_id = {{
+		/* RFC4122 uuid5(uuid5(uuid.NAMESPACE_DNS, 'nordicsemi.com'),
+		 *              'nRF54H20_sample_root')
+		 */
+		0x3f, 0x6a, 0x3a, 0x4d, 0xcd, 0xfa, 0x58, 0xc5,
+		0xac, 0xce, 0xf9, 0xf5, 0x84, 0xc4, 0x11, 0x24
+	}};
+
+	int err = suit_get_installed_manifest_info((
+				suit_manifest_class_id_t *)&manifest_class_id,
+				seq_num, NULL, NULL, NULL, NULL);
+
+	return err;
+}

applications/nrf_desktop/src/util/desktop_suit.h

@@ -0,0 +1,12 @@
+/*
+ * Copyright (c) 2024 Nordic Semiconductor ASA
+ *
+ * SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+ */
+
+#ifndef _DESKTOP_SUIT_H_
+#define _DESKTOP_SUIT_H_
+
+int suit_get_installed_manifest_seq_num(unsigned int *seq_num);
+
+#endif /* _DESKTOP_SUIT_H_ */