Skip to content

Commit

Permalink
doc: Update the ipc_radio enable doc section
Browse files Browse the repository at this point in the history 
Correct the ipc_radio configuration Kconfig for enable.

Jira: NCSDK-27939

Signed-off-by: Dominik Chat <[email protected]>
  • Loading branch information
@dchat-nordic @anangl
dchat-nordic authored and anangl committed Jun 17, 2024
1 parent caaf03c commit d96e501
Showing 1 changed file with 8 additions and 5 deletions.
13 changes: 8 additions & 5 deletions applications/ipc_radio/README.rst
View file
Original file line number Diff line number Diff line change
Expand Up @@ -76,13 +76,16 @@ The Bluetooth Low Energy and IEEE 802.15.4 functionalities can operate simultane
Sysbuild Kconfig options
========================

To enable the firmware, use the sysbuild configuration of :kconfig:option:`SB_CONFIG_NRF_DEFAULT_IPC_RADIO`.
To enable the firmware, use the sysbuild configuration ``SB_CONFIG_NETCORE_IPC_RADIO``.

You can set the supported radio configurations using the following sysbuild Kconfig options:

* :kconfig:option:`SB_CONFIG_NETCORE_IPC_RADIO_BT_HCI_IPC`
* :kconfig:option:`SB_CONFIG_NETCORE_IPC_RADIO_BT_RPC`
* :kconfig:option:`SB_CONFIG_NETCORE_IPC_RADIO_IEEE802154`
* ``SB_CONFIG_NETCORE_IPC_RADIO_BT_HCI_IPC``
* ``SB_CONFIG_NETCORE_IPC_RADIO_BT_RPC``
* ``SB_CONFIG_NETCORE_IPC_RADIO_IEEE802154``

.. note::
For |NCS| samples and applications, use the ``SB_CONFIG_NRF_DEFAULT_IPC_RADIO`` sysbuild configuration to enable the firmware instead of ``SB_CONFIG_NETCORE_IPC_RADIO`` (which should only be used for production).

Configuration files
===================
Expand All @@ -100,7 +103,7 @@ The following files are available:
When you use sysbuild to build an application which uses the IPC radio firmware as the network or radio core image, the preceding configuration files are added automatically to the IPC radio firmware.
The selection of specific configuration files is determined by the sysbuild Kconfig.

For instance, the :kconfig:option:`SB_CONFIG_NETCORE_IPC_RADIO_IEEE802154` Kconfig option enables the :file:`overlay-802154.conf` configuration file to be used with the IPC radio firmware.
For instance, the ``SB_CONFIG_NETCORE_IPC_RADIO_IEEE802154`` Kconfig option enables the :file:`overlay-802154.conf` configuration file to be used with the IPC radio firmware.

Building and running as a single image
**************************************
Expand Down

0 comments on commit d96e501

Please sign in to comment.