samples: wifi: Switch BLE/IEEE802154 radio firmware to ipc_radio

doc/nrf/releases_and_maturity/releases/release-notes-changelog.rst

@@ -759,6 +759,8 @@ Zigbee samples that used :ref:`zephyr:nrf-ieee802154-rpmsg-sample` or :ref:`mult
 Wi-Fi samples
 -------------
 
+Wi-Fi samples that used :ref:`zephyr:bluetooth-hci-ipc-sample` or :ref:`zephyr:nrf-ieee802154-rpmsg-sample` radio core firmware, now use the :ref:`ipc_radio`.
+
 * Added the :ref:`softap_wifi_provision_sample` sample.
 * Added the :ref:`wifi_thread_coex_sample` sample that demonstrates Wi-Fi and Thread coexistence.
 

samples/wifi/ble_coex/Kconfig.sysbuild

@@ -0,0 +1,10 @@
+#
+# Copyright (c) 2024 Nordic Semiconductor
+#
+# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+#
+
+source "${ZEPHYR_BASE}/share/sysbuild/Kconfig"
+
+config NRF_DEFAULT_IPC_RADIO
+	default y

samples/wifi/ble_coex/README.rst

@@ -137,15 +137,15 @@ The following are examples of the CLI commands:
 
   .. code-block:: console
 
-     west build -p -b nrf7002dk/nrf5340/cpuapp -- -DCONFIG_MPSL_CX=n -Dhci_ipc_CONFIG_MPSL_CX=n
+     west build -p -b nrf7002dk/nrf5340/cpuapp -- -DCONFIG_MPSL_CX=n -Dipc_radio_CONFIG_MPSL_CX=n
 
 Use this command for Wi-Fi throughput only, Bluetooth LE throughput only, or concurrent Wi-Fi and Bluetooth LE throughput with coexistence disabled tests.
 
 * Build with coexistence enabled:
 
   .. code-block:: console
 
-     west build -p -b nrf7002dk/nrf5340/cpuapp -- -DCONFIG_MPSL_CX=y -Dhci_ipc_CONFIG_MPSL_CX=y
+     west build -p -b nrf7002dk/nrf5340/cpuapp -- -DCONFIG_MPSL_CX=y -Dipc_radio_CONFIG_MPSL_CX=y
 
 Use this command for concurrent Wi-Fi and Bluetooth LE throughput with coexistence enabled test.
 
@@ -169,13 +169,13 @@ Add the following SHIELD options for the nRF7002 EK and nRF7001 EK.
 
   .. code-block:: console
 
-     -DSHIELD=nrf7002ek -Dhci_ipc_SHIELD=nrf7002ek_coex
+     -DSHIELD=nrf7002ek -Dipc_radio_SHIELD=nrf7002ek_coex
 
 * For nRF7001 EK:
 
   .. code-block:: console
 
-     -DSHIELD=nrf7002ek_nrf7001 -Dhci_ipc_SHIELD=nrf7002ek_nrf7001_coex
+     -DSHIELD=nrf7002ek_nrf7001 -Dipc_radio_SHIELD=nrf7002ek_nrf7001_coex
 
 The generated HEX file to be used is :file:`ble_coex/build/zephyr/merged_domains.hex`.
 

samples/wifi/ble_coex/sample.yaml

@@ -8,7 +8,7 @@ tests:
     build_only: true
     integration_platforms:
       - nrf7002dk/nrf5340/cpuapp
-    extra_args: CONFIG_MPSL_CX=y hci_ipc_CONFIG_MPSL_CX=y
+    extra_args: CONFIG_MPSL_CX=y ipc_radio_CONFIG_MPSL_CX=y
                 CONFIG_COEX_SEP_ANTENNAS=y
     platform_allow: nrf7002dk/nrf5340/cpuapp
     tags: ci_build sysbuild
@@ -17,7 +17,7 @@ tests:
     build_only: true
     integration_platforms:
       - nrf7002dk/nrf5340/cpuapp
-    extra_args: CONFIG_MPSL_CX=y hci_ipc_CONFIG_MPSL_CX=y
+    extra_args: CONFIG_MPSL_CX=y ipc_radio_CONFIG_MPSL_CX=y
                 CONFIG_COEX_SEP_ANTENNAS=n
     platform_allow: nrf7002dk/nrf5340/cpuapp
     tags: ci_build sysbuild
@@ -26,7 +26,7 @@ tests:
     build_only: true
     integration_platforms:
       - nrf7002dk/nrf5340/cpuapp/nrf7001
-    extra_args: CONFIG_MPSL_CX=y hci_ipc_CONFIG_MPSL_CX=y
+    extra_args: CONFIG_MPSL_CX=y ipc_radio_CONFIG_MPSL_CX=y
                 CONFIG_COEX_SEP_ANTENNAS=y
     platform_allow: nrf7002dk/nrf5340/cpuapp/nrf7001
     tags: ci_build sysbuild
@@ -36,8 +36,8 @@ tests:
     build_only: true
     integration_platforms:
       - nrf5340dk/nrf5340/cpuapp
-    extra_args: SHIELD=nrf7002ek hci_ipc_SHIELD=nrf7002ek_coex
-                CONFIG_MPSL_CX=y hci_ipc_CONFIG_MPSL_CX=y
+    extra_args: SHIELD=nrf7002ek ipc_radio_SHIELD=nrf7002ek_coex
+                CONFIG_MPSL_CX=y ipc_radio_CONFIG_MPSL_CX=y
                 CONFIG_COEX_SEP_ANTENNAS=y
     platform_allow: nrf5340dk/nrf5340/cpuapp
     tags: ci_build sysbuild
@@ -46,16 +46,16 @@ tests:
     build_only: true
     integration_platforms:
       - nrf5340dk/nrf5340/cpuapp
-    extra_args: SHIELD=nrf7002ek_nrf7001 hci_ipc_SHIELD=nrf7002ek_nrf7001_coex
-                CONFIG_MPSL_CX=y hci_ipc_CONFIG_MPSL_CX=y
+    extra_args: SHIELD=nrf7002ek_nrf7001 ipc_radio_SHIELD=nrf7002ek_nrf7001_coex
+                CONFIG_MPSL_CX=y ipc_radio_CONFIG_MPSL_CX=y
                 CONFIG_COEX_SEP_ANTENNAS=y
     platform_allow: nrf5340dk/nrf5340/cpuapp
     tags: sysbuild
   sample.nrf7002_eb.thingy53.ble_coex:
     sysbuild: true
     build_only: true
-    extra_args: ble_coex_SHIELD=nrf7002eb hci_ipc_SHIELD=nrf7002eb_coex
-                CONFIG_MPSL_CX=y hci_ipc_CONFIG_MPSL_CX=y
+    extra_args: ble_coex_SHIELD=nrf7002eb ipc_radio_SHIELD=nrf7002eb_coex
+                CONFIG_MPSL_CX=y ipc_radio_CONFIG_MPSL_CX=y
                 CONFIG_COEX_SEP_ANTENNAS=y
     integration_platforms:
       - thingy53/nrf5340/cpuapp

samples/wifi/ble_coex/sysbuild/hci_ipc/prj.conf → samples/wifi/ble_coex/sysbuild/ipc_radio/prj.conf

@@ -1,20 +1,14 @@
-CONFIG_IPC_SERVICE=y
-CONFIG_MBOX=y
-
 CONFIG_HEAP_MEM_POOL_SIZE=8192
-
 CONFIG_MAIN_STACK_SIZE=512
 CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=512
 
+CONFIG_MBOX=y
+CONFIG_IPC_SERVICE=y
+
 CONFIG_BT=y
 CONFIG_BT_HCI_RAW=y
 #CONFIG_BT_MAX_CONN=16
 
-
-# Workaround: Unable to allocate command buffer when using K_NO_WAIT since
-# Host number of completed commands does not follow normal flow control.
-CONFIG_BT_BUF_CMD_TX_COUNT=10
-
 # Enable and adjust the below value as necessary
 # CONFIG_BT_BUF_EVT_RX_COUNT=16
 # CONFIG_BT_BUF_EVT_RX_SIZE=255
@@ -29,3 +23,6 @@ CONFIG_BT_BUF_ACL_RX_SIZE=502
 CONFIG_BT_BUF_ACL_TX_SIZE=502
 
 CONFIG_BT_MAX_CONN=2
+
+CONFIG_IPC_RADIO_BT=y
+CONFIG_IPC_RADIO_BT_HCI_IPC=y

samples/wifi/provisioning/ble/Kconfig.sysbuild

@@ -8,6 +8,3 @@ source "${ZEPHYR_BASE}/share/sysbuild/Kconfig"
 
 config NRF_DEFAULT_IPC_RADIO
 	default y
-
-config NETCORE_IPC_RADIO_BT_HCI_IPC
-	default y

samples/wifi/provisioning/ble/sysbuild/hci_ipc/prj.conf → samples/wifi/provisioning/ble/sysbuild/ipc_radio/prj.conf

@@ -1,20 +1,14 @@
-CONFIG_IPC_SERVICE=y
-CONFIG_MBOX=y
-
 CONFIG_HEAP_MEM_POOL_SIZE=8192
-
 CONFIG_MAIN_STACK_SIZE=512
 CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=512
 
+CONFIG_MBOX=y
+CONFIG_IPC_SERVICE=y
+
 CONFIG_BT=y
 CONFIG_BT_HCI_RAW=y
 #CONFIG_BT_MAX_CONN=16
 
-
-# Workaround: Unable to allocate command buffer when using K_NO_WAIT since
-# Host number of completed commands does not follow normal flow control.
-CONFIG_BT_BUF_CMD_TX_COUNT=10
-
 # Enable and adjust the below value as necessary
 # CONFIG_BT_BUF_EVT_RX_COUNT=16
 # CONFIG_BT_BUF_EVT_RX_SIZE=255
@@ -26,3 +20,6 @@ CONFIG_BT_BUF_ACL_TX_SIZE=151
 CONFIG_BT_BUF_ACL_RX_SIZE=151
 CONFIG_BT_CTLR_DATA_LENGTH_MAX=151
 CONFIG_BT_MAX_CONN=2
+
+CONFIG_IPC_RADIO_BT=y
+CONFIG_IPC_RADIO_BT_HCI_IPC=y

samples/wifi/thread_coex/Kconfig.sysbuild

@@ -0,0 +1,10 @@
+#
+# Copyright (c) 2024 Nordic Semiconductor
+#
+# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+#
+
+source "${ZEPHYR_BASE}/share/sysbuild/Kconfig"
+
+config NRF_DEFAULT_IPC_RADIO
+	default y

samples/wifi/thread_coex/sample.yaml

@@ -8,7 +8,7 @@ tests:
     build_only: true
     integration_platforms:
       - nrf7002dk/nrf5340/cpuapp
-    extra_args: CONFIG_MPSL_CX=y 802154_rpmsg_CONFIG_MPSL_CX=y
+    extra_args: CONFIG_MPSL_CX=y ipc_radio_CONFIG_MPSL_CX=y
                 CONFIG_COEX_SEP_ANTENNAS=y
                 EXTRA_CONF_FILE="overlay-ot.conf;overlay-wifi-udp-client-thread-udp-client.conf"
     platform_allow: nrf7002dk/nrf5340/cpuapp
@@ -18,7 +18,7 @@ tests:
     build_only: true
     integration_platforms:
       - nrf7002dk/nrf5340/cpuapp/nrf7001
-    extra_args: CONFIG_MPSL_CX=y 802154_rpmsg_CONFIG_MPSL_CX=y
+    extra_args: CONFIG_MPSL_CX=y ipc_radio_CONFIG_MPSL_CX=y
                 CONFIG_COEX_SEP_ANTENNAS=y
                 EXTRA_CONF_FILE="overlay-ot.conf;overlay-wifi-udp-client-thread-udp-client.conf"
     platform_allow: nrf7002dk/nrf5340/cpuapp/nrf7001
@@ -28,8 +28,8 @@ tests:
     build_only: true
     integration_platforms:
       - nrf5340dk/nrf5340/cpuapp
-    extra_args: SHIELD=nrf7002ek 802154_rpmsg_SHIELD=nrf7002ek_coex
-                CONFIG_MPSL_CX=y 802154_rpmsg_CONFIG_MPSL_CX=y
+    extra_args: SHIELD=nrf7002ek ipc_radio_SHIELD=nrf7002ek_coex
+                CONFIG_MPSL_CX=y ipc_radio_CONFIG_MPSL_CX=y
                 CONFIG_COEX_SEP_ANTENNAS=y
                 EXTRA_CONF_FILE="overlay-ot.conf;overlay-wifi-udp-client-thread-udp-client.conf"
     platform_allow: nrf5340dk/nrf5340/cpuapp
@@ -39,17 +39,17 @@ tests:
     build_only: true
     integration_platforms:
       - nrf5340dk/nrf5340/cpuapp
-    extra_args: SHIELD=nrf7002ek_nrf7001 802154_rpmsg_SHIELD=nrf7002ek_nrf7001_coex
-                CONFIG_MPSL_CX=y 802154_rpmsg_CONFIG_MPSL_CX=y
+    extra_args: SHIELD=nrf7002ek_nrf7001 ipc_radio_SHIELD=nrf7002ek_nrf7001_coex
+                CONFIG_MPSL_CX=y ipc_radio_CONFIG_MPSL_CX=y
                 CONFIG_COEX_SEP_ANTENNAS=y
                 EXTRA_CONF_FILE="overlay-ot.conf;overlay-wifi-udp-client-thread-udp-client.conf"
     platform_allow: nrf5340dk/nrf5340/cpuapp
     tags: ci_build sysbuild
   sample.nrf7002_eb.thingy53.thread_coex:
     sysbuild: true
     build_only: true
-    extra_args: thread_coex_SHIELD=nrf7002eb 802154_rpmsg_SHIELD=nrf7002eb_coex
-                CONFIG_MPSL_CX=y 802154_rpmsg_CONFIG_MPSL_CX=y
+    extra_args: thread_coex_SHIELD=nrf7002eb ipc_radio_SHIELD=nrf7002eb_coex
+                CONFIG_MPSL_CX=y ipc_radio_CONFIG_MPSL_CX=y
                 CONFIG_COEX_SEP_ANTENNAS=y
                 EXTRA_CONF_FILE="overlay-ot.conf;overlay-wifi-udp-client-thread-udp-client.conf"
     integration_platforms:

samples/wifi/thread_coex/sysbuild/ipc_radio/prj.conf

@@ -0,0 +1,16 @@
+#
+# Copyright (c) 2024 Nordic Semiconductor
+#
+# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+#
+
+CONFIG_SERIAL=n
+CONFIG_UART_CONSOLE=n
+CONFIG_LOG=n
+
+CONFIG_NRF_802154_SER_RADIO=y
+CONFIG_NRF_RTC_TIMER_USER_CHAN_COUNT=2
+CONFIG_NRF_802154_ENCRYPTION=y
+
+CONFIG_IPC_RADIO_BT=y
+CONFIG_IPC_RADIO_802154=y