The RSCT
Operator enables RSCT on a cluster.
Run the following command to deploy the RSCT
Operator:
make deploy
-
Switch to the
rsct-operator-system
namespaceoc project rsct-operator-system
-
Create the cluster role binding and
RSCT
resourcesoc apply -f config/samples/rsct_v1alpha1_rsct.yaml
Check that the pods have been created and are running
oc get pods
A readiness probe will check that each pod is running, which can take up to 10 minutes.
Output should be similar to the following
NAME READY STATUS RESTARTS AGE
rsct-operator-controller-manager-b8495fb5-kznsw 2/2 Running 0 10m
rsct-test-9qstd 1/1 Running 0 6m49s
rsct-test-gclb2 1/1 Running 0 6m49s
rsct-test-gcqjh 1/1 Running 0 6m49s
rsct-test-tbvdx 1/1 Running 0 6m49s
rsct-test-wt8x9 1/1 Running 0 6m49s
Run the following command to remove the RSCT
Operator:
make undeploy