Skip to content

Layer 2 troubleshooting

Jump to bottom
Amy Buck edited this page Nov 21, 2018 · 5 revisions

You can use Linux commands to troubleshoot Layer 2, and use ip link show to verify that all Linux network interfaces are created.

Enable NAS and SAI L2 logging

opx_logging_cli enable NAS_L2

opx_logging_cli enable INTERFACE

opx_logging_cli enable L2MAC

opx_logging_cli enable SAI_FDB

opx_logging_cli enable SAI_STPLayer

© 2019 OpenSwitch project. All information is contributed to and made available by OPX under the Creative Commons Attribution 4.0 International License (available at http://creativecommons.org/licenses/by/4.0/).

Clone this wiki locally