Skip to content

pbrah/wpa_supplicant-udmpro

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

16 Commits
 
 
 
 

Repository files navigation

wpa_supplicant for UDM and UDM Pro

UPDATE 03.07.2020

For v1.6.3 and newer you need to run your container with podman instead which changes the command slightly. Below is an example of how to do this. Keep in mind that currently there is an alias for docker to point to the podman executable on the UDM Pro since it was made to be a drop in replacement for docker commands. I would still run this with the podman executable just in case that alias goes away in the future.

podman run --privileged --network=host --name=wpa_supplicant-udmpro -v /mnt/data/docker/wpa_supplicant/:/etc/wpa_supplicant/conf/ --log-driver=json-file --restart unless-stopped -d -ti pbrah/wpa_supplicant-udmpro:v1.0 -Dwired -ieth8 -c/etc/wpa_supplicant/conf/wpa_supplicant.conf

overview

This guide has primarily been written for authenticating to AT&T U-Verse using wpa_supplicant on a UDM Pro. It is assumed that you've already retrieved your certificates from a modem supplied by AT&T. If you have not, you can purchase a used modem on ebay, such as the NVG589 and then root it to get the certificates. I had success using the following guide.

https://github.com/bypassrg/att

If the above link no longer works, I have also forked it to my GitHub below.

https://github.com/pbrah/att

Before moving on to the next section, make sure you've copied your root certificate into the CA_*.pem file per the instructions of the 802.1x Credential Extraction Tool (mfg_dat_decode).

running the docker image

  1. scp your certs and wpa_supplicant.conf to the UDM Pro
scp -r *.pem [email protected]:/tmp/
[email protected]'s password:
CA_001E46-xxxx.pem                                                          100% 3926     3.8KB/s   00:00
Client_001E46-xxxx.pem                                                      100% 1119     1.1KB/s   00:00
PrivateKey_PKCS1_001E46-xxxx.pem                                            100%  887     0.9KB/s   00:00

scp -r wpa_supplicant.conf [email protected]:/tmp/
wpa_supplicant.conf                                                         100%  680     0.7KB/s   00:00
  1. ssh to the UDM Pro, create a directory for the certs and wpa_supplicant.conf in the docker directory then copy the files over.
mkdir /mnt/data/docker/wpa_supplicant/
cp -arfv /tmp/*pem /tmp/wpa_supplicant.conf /mnt/data/docker/wpa_supplicant/
  1. Update the wpa_supplicant.conf to reflect the correct paths for our container. Do not run these more than once or you will end up with incorrect paths.
sed -i 's,ca_cert=",ca_cert="/etc/wpa_supplicant/conf/,g' /mnt/data/docker/wpa_supplicant/wpa_supplicant.conf
sed -i 's,client_cert=",client_cert="/etc/wpa_supplicant/conf/,g' /mnt/data/docker/wpa_supplicant/wpa_supplicant.conf
sed -i 's,private_key=",private_key="/etc/wpa_supplicant/conf/,g' /mnt/data/docker/wpa_supplicant/wpa_supplicant.conf

After running the sed commands, verify your paths in wpa_supplicant.conf look something like this:

# cat wpa_supplicant.conf
# Generated by 802.1x Credential Extraction Tool
# Copyright (c) 2018-2019 devicelocksmith.com
# Version: 1.04 linux amd64
#
# Change file names to absolute paths
eapol_version=1
ap_scan=0
fast_reauth=1
network={
        ca_cert="/etc/wpa_supplicant/conf/CA_001E46-xxxxxxxx.pem"
        client_cert="/etc/wpa_supplicant/conf/Client_001E46-xxxxxx.pem"
        eap=TLS
        eapol_flags=0
        identity="10:05:B1:xx:xx:xx" # Internet (ONT) interface MAC address must match this value
        key_mgmt=IEEE8021X
        phase1="allow_canned_success=1"
        private_key="/etc/wpa_supplicant/conf/PrivateKey_PKCS1_001E46-xxxxxx.pem"
}
# WARNING! Missing AAA server root CA! Add AAA server root CA to CA_001E46-xxxxxx.pem
#
  1. Pull the docker image while you have an internet connection on the UDM Pro. This step is optional if you plan on running step 5 while you have an internet connection.
docker pull pbrah/wpa_supplicant-udmpro:v1.0
  1. Run the wpa_supplicant docker container, the docker run command below assumes you are using port 9 or eth8 for your wan. If not, adjust accordingly.
docker run --privileged --network=host --name=wpa_supplicant-udmpro -v /mnt/data/docker/wpa_supplicant/:/etc/wpa_supplicant/conf/ --log-driver=json-file --restart unless-stopped -d -ti pbrah/wpa_supplicant-udmpro:v1.0 -Dwired -ieth8 -c/etc/wpa_supplicant/conf/wpa_supplicant.conf

troubleshooting

If you are having issues connecting after starting your docker container, the first thing you should do is check your docker container logs.

docker logs -f wpa_supplicant-udmpro

From a recent case I assisted in troubleshooting, the user saw the following in their logs. The was due to their wpa_supplicant.conf having incorrect paths to the certificates. Refer to my example in the instructions to ensure yours are pointing to the correct location.

OpenSSL: tls_connection_ca_cert - Failed to load root certificates error:02001002:system library:fopen:No such file or directory
OpenSSL: pending error: error:2006D080:BIO routines:BIO_new_file:no such file
OpenSSL: pending error: error:0B084002:x509 certificate routines:X509_load_cert_crl_file:system lib
OpenSSL: tls_load_ca_der - Failed load CA in DER format error:02001002:system library:fopen:No such file or directory
OpenSSL: pending error: error:20074002:BIO routines:file_ctrl:system lib
OpenSSL: pending error: error:0B06F002:x509 certificate routines:X509_load_cert_file:system lib
TLS: Failed to set TLS connection parameters
EAP-TLS: Failed to initialize SSL.

create your own docker image

For anyone that wants to create their own docker image, I've provided brief instructions below.

  1. grab docker/Dockerfile and upload it to /root/docker/ on the UDM Pro
  2. Build image
cd /root/docker/
docker build --network=host -t pbrah/wpa_supplicant-udmpro:v1.0 .

UDM non-pro

This works with the standard UDM as of OS 1.7.0 with a few adjustments to the podman run command:

podman run --privileged --network=host --name=wpa_supplicant-udmpro -v /mnt/data/docker/wpa_supplicant/:/etc/wpa_supplicant/conf/ --log-driver=k8s-file --restart always -d -ti pbrah/wpa_supplicant-udmpro:v1.0 -Dwired -ieth4 -c/etc/wpa_supplicant/conf/wpa_supplicant.conf

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published