ap·prise / verb
To inform or tell (someone). To make one aware of something.
Apprise allows you to send a notification to almost all of the most popular notification services available to us today such as: Telegram, Pushbullet, Slack, Twitter, etc.
- One notification library to rule them all.
- A common and intuitive notification syntax.
- Supports the handling of images (to the notification services that will accept them).
System owners who wish to provide a notification service no longer need to research each and every new one as they appear. They just need to include this one library and then they can immediately gain access to almost all of the notifications services available to us today.
System Administrators who wish to send a notification from a scheduled task or from the command line also no longer need to find the right tool for the job. Everything is already wrapped and supported within the apprise script that ships with this product.
The section identifies all of the services supported by this library. Check out the wiki for more information on the supported modules here.
The table below identifies the services this tool supports and some example service urls you need to use in order to take advantage of it.
| Notification Service | Service ID | Default Port | Example Syntax |
|---|---|---|---|
| Boxcar | boxcar:// | (TCP) 443 | boxcar://hostname boxcar://hostname/@tag boxcar://hostname/device_token boxcar://hostname/device_token1/device_token2/device_tokenN boxcar://hostname/@tag/@tag2/device_token |
| Discord | discord:// | (TCP) 443 | discord://webhook_id/webhook_token discord://avatar@webhook_id/webhook_token |
| Emby | emby:// or embys:// | (TCP) 8096 | emby://user@hostname/ emby://user:password@hostname |
| Faast | faast:// | (TCP) 443 | faast://authorizationtoken |
| Gnome | gnome:// | n/a | gnome:// |
| Growl | growl:// | (UDP) 23053 | growl://hostname growl://hostname:portno growl://password@hostname growl://password@hostname:port Note: you can also use the get parameter version which can allow the growl request to behave using the older v1.x protocol. An example would look like: growl://hostname?version=1 |
| IFTTT | ifttt:// | (TCP) 443 | ifttt://webhooksID/EventToTrigger ifttt://webhooksID/EventToTrigger/Value1/Value2/Value3 ifttt://webhooksID/EventToTrigger/?Value3=NewEntry&Value2=AnotherValue |
| Join | join:// | (TCP) 443 | join://apikey/device join://apikey/device1/device2/deviceN/ join://apikey/group join://apikey/groupA/groupB/groupN join://apikey/DeviceA/groupA/groupN/DeviceN/ |
| KODI | kodi:// or kodis:// | (TCP) 8080 or 443 | kodi://hostname kodi://user@hostname kodi://user:password@hostname:port |
| Matrix | matrix:// | (TCP) 443 | matrix://token matrix://user@token matrixs://token?mode=slack matrixs://user@token |
| Mattermost | mmost:// | (TCP) 8065 | mmost://hostname/authkey mmost://hostname:80/authkey mmost://user@hostname:80/authkey mmost://hostname/authkey?channel=channel mmosts://hostname/authkey mmosts://user@hostname/authkey |
| Prowl | prowl:// | (TCP) 443 | prowl://apikey prowl://apikey/providerkey |
| Pushalot | palot:// | (TCP) 443 | palot://authorizationtoken |
| PushBullet | pbul:// | (TCP) 443 | pbul://accesstoken pbul://accesstoken/#channel pbul://accesstoken/A_DEVICE_ID pbul://accesstoken/[email protected] pbul://accesstoken/#channel/#channel2/[email protected]/DEVICE |
| Pushjet | pjet:// | (TCP) 80 | pjet://secret pjet://secret@hostname pjet://secret@hostname:port pjets://secret@hostname pjets://secret@hostname:port Note: if no hostname defined https://api.pushjet.io will be used |
| Pushover | pover:// | (TCP) 443 | pover://user@token pover://user@token/DEVICE pover://user@token/DEVICE1/DEVICE2/DEVICEN Note: you must specify both your user_id and token |
| Rocket.Chat | rocket:// or rockets:// | (TCP) 80 or 443 | rocket://user:password@hostname/RoomID/Channel rockets://user:password@hostname:443/Channel1/Channel1/RoomID rocket://user:password@hostname/Channel |
| Slack | slack:// | (TCP) 443 | slack://TokenA/TokenB/TokenC/Channel slack://botname@TokenA/TokenB/TokenC/Channel slack://user@TokenA/TokenB/TokenC/Channel1/Channel2/ChannelN |
| Stride | stride:// | (TCP) 443 | stride://auth_token/cloud_id/convo_id |
| Super Toasty | toasty:// | (TCP) 80 | toasty://user@DEVICE toasty://user@DEVICE1/DEVICE2/DEVICEN Note: you must specify both your user_id and at least 1 device! |
| Telegram | tgram:// | (TCP) 443 | tgram://bottoken/ChatID tgram://bottoken/ChatID1/ChatID2/ChatIDN |
| tweet:// | (TCP) 443 | tweet://user@CKey/CSecret/AKey/ASecret | |
| XBMC | xbmc:// or xbmcs:// | (TCP) 8080 or 443 | xbmc://hostname xbmc://user@hostname xbmc://user:password@hostname:port |
| Windows Notification | windows:// | n/a | windows:// |
| Service ID | Default Port | Example Syntax |
|---|---|---|
| mailto:// | (TCP) 25 | mailto://userid:[email protected] mailto://domain.com?user=userid&pass=password mailto://domain.com:2525?user=userid&pass=password mailto://[email protected]&pass=password mailto://mySendingUsername:[email protected]?to=[email protected] mailto://userid:[email protected]?smtp=mail.example.com&from=[email protected]&name=no%20reply |
| mailtos:// | (TCP) 587 | mailtos://userid:[email protected] mailtos://domain.com?user=userid&pass=password mailtos://domain.com:465?user=userid&pass=password mailtos://[email protected]&pass=password mailtos://mySendingUsername:[email protected]?to=[email protected] mailtos://userid:[email protected]?smtp=mail.example.com&from=[email protected]&name=no%20reply |
Apprise have some email services built right into it (such as yahoo, fastmail, hotmail, gmail, etc) that greatly simplify the mailto:// service. See more details here.
| Post Method | Service ID | Default Port | Example Syntax |
|---|---|---|---|
| JSON | json:// or jsons:// | (TCP) 80 or 443 | json://hostname json://user@hostname json://user:password@hostname:port json://hostname/a/path/to/post/to |
| XML | xml:// or xmls:// | (TCP) 80 or 443 | xml://hostname xml://user@hostname xml://user:password@hostname:port xml://hostname/a/path/to/post/to |
The easiest way is to install this package is from pypi:
pip install appriseA small command line tool is also provided with this package called apprise. If you know the server url's you wish to notify, you can simply provide them all on the command line and send your notifications that way:
# Send a notification to as many servers as you want to specify
# as you can easily chain them together:
apprise -t 'my title' -b 'my notification body' \
'mailto://myemail:[email protected]' \
'pbul://o.gn5kj6nfhv736I7jC3cj3QLRiyhgl98b'
# If you don't specify a --body (-b) then stdin is used allowing
# you to use the tool as part of your every day administration:
cat /proc/cpuinfo | apprise -t 'cpu info' \
'mailto://myemail:[email protected]'To send a notification from within your python application, just do the following:
import apprise
# create an Apprise instance
apobj = apprise.Apprise()
# Add all of the notification services by their server url.
# A sample email notification
apobj.add('mailto://myemail:[email protected]')
# A sample pushbullet notification
apobj.add('pbul://o.gn5kj6nfhv736I7jC3cj3QLRiyhgl98b')
# Then notify these services any time you desire. The below would
# notify all of the services loaded into our Apprise object.
apobj.notify(
title='my notification title',
body='what a great notification service!',
)If you're interested in reading more about this and methods on how to customize your own notifications, please check out the wiki at https://github.com/caronc/apprise/wiki/Development_API