mcxn94x: Enable PLL0 @150 MHz and use it as CPU clk

JIRA: RTOS-881

hal/armv8m/mcx/n94x/n94x.c

@@ -596,6 +596,83 @@ static void _mcxn94x_clockConfigOsc32khz(u8 extal, u8 cap, u8 gain)
 }
 
 
+
+static void _mcxn94x_clockConfigExtClk(u32 freq)
+{
+	u8 range;
+
+	if (freq < (20 * 1000 * 1000)) {
+		range = 0;
+	}
+	else if (freq < (30 * 1000 * 1000)) {
+		range = 1;
+	}
+	else if (freq < (50 * 1000 * 1000)) {
+		range = 2;
+	}
+	else {
+		range = 3;
+	}
+
+	/* Clear errors if present */
+	*(n94x_common.scg + scg_sosccsr) = (1 << 26);
+
+	/* Set range and internal reference */
+	*(n94x_common.scg + scg_sosccfg) = (range << 4) | (1 << 2);
+
+	/* Unlock SOSCCSR */
+	*(n94x_common.scg + scg_sosccsr) &= ~(1 << 23);
+	hal_cpuDataMemoryBarrier();
+
+	/* Enable clock and monitor */
+	*(n94x_common.scg + scg_sosccsr) |= (1 << 17) | 1;
+	hal_cpuDataMemoryBarrier();
+
+	/* Wait for clock to stabilize */
+	while ((*(n94x_common.scg + scg_sosccsr) & (1 << 24)) == 0) {
+	}
+}
+
+
+static void _mcxn94x_clockConfigPLL0(u8 source, u8 seli, u8 selp, u8 mdiv, u8 pdiv, u8 ndiv)
+{
+	/* Power off during config */
+	*(n94x_common.scg + scg_apllcsr) &= ~((1 << 1) | 1);
+	hal_cpuDataMemoryBarrier();
+
+	/* Configure parameters */
+	*(n94x_common.scg + scg_apllctrl) = ((source & 0x3) << 25) | ((selp & 0x1f) << 10) | ((seli & 0x3f) << 4);
+	*(n94x_common.scg + scg_apllndiv) = ndiv;
+	hal_cpuDataMemoryBarrier();
+	*(n94x_common.scg + scg_apllndiv) = ndiv | (1u << 31);
+	*(n94x_common.scg + scg_apllpdiv) = pdiv;
+	hal_cpuDataMemoryBarrier();
+	*(n94x_common.scg + scg_apllpdiv) = pdiv | (1u << 31);
+	*(n94x_common.scg + scg_apllmdiv) = mdiv;
+	hal_cpuDataMemoryBarrier();
+	*(n94x_common.scg + scg_apllmdiv) = mdiv | (1u << 31);
+	hal_cpuDataMemoryBarrier();
+	*(n94x_common.scg + scg_apllsscg0) = 0;
+	*(n94x_common.scg + scg_apllsscg1) = 0;
+
+	/* Unlock scg_aplllock_cnfg */
+	*(n94x_common.scg + scg_trimlock) = 0x5a5a0001;
+	hal_cpuDataMemoryBarrier();
+
+	/* Config lock time */
+	*(n94x_common.scg + scg_aplllockcnfg) = (SOSC_FREQ / 2000) + 300;
+	hal_cpuDataMemoryBarrier();
+
+	/* Enable PLL0 */
+	*(n94x_common.scg + scg_apllcsr) |= (1 << 1) | 1;
+	hal_cpuDataMemoryBarrier();
+
+	/* Wait for lock */
+	while ((*(n94x_common.scg + scg_apllcsr) & (1 << 24)) == 0) {
+	}
+}
+
+
 void _mcxn94x_init(void)
 {
 	int i;
@@ -658,4 +735,22 @@ void _mcxn94x_init(void)
 	/* Enable 32 KHz oscillator */
 	/* TODO determine EXTAL_CAP_SEL, XTAL_CAP_SEL and COARSE_AMP_GAIN values */
 	_mcxn94x_clockConfigOsc32khz(ROSC_EXTALCAP_PF / 2, ROSC_CAP_PF / 2, ROSC_AMP_GAIN);
+
+	/* Configure 24 MHz oscilator pins */
+	_mcxn94x_portPinConfig(pctl_pin_p1_30, 0, MCX_PIN_FAST | MCX_PIN_INPUT_BUFFER_ENABLE);
+	_mcxn94x_portPinConfig(pctl_pin_p1_31, 0, MCX_PIN_FAST | MCX_PIN_INPUT_BUFFER_ENABLE);
+
+	/* Enable oscilator */
+	_mcxn94x_clockConfigExtClk(SOSC_FREQ);
+
+	/* Enable PPL0 @150 MHz, SOSC source */
+	_mcxn94x_clockConfigPLL0(0, 27, 13, 8, 1, 50);
+
+	/* Select PLL0 as a main clock */
+	*(n94x_common.scg + scg_rccr) = 5 << 24;
+	hal_cpuDataMemoryBarrier();
+
+	/* Set AHB clock divider to clk / 1 */
+	*(n94x_common.syscon + syscon_ahbclkdiv) = 0;
+	hal_cpuDataMemoryBarrier();
 }