An ST development board based on the STM32F030C8T6 (Clock: 48MHz, Flash: 64Kb, Ram:8Kb) MCU compatible with STM32Duino (Arduino).
Pinout:
- RBOARD_F030C8T6 it's the variant board for the STM32 Arduino Core.
- rSTM32F030C8T6 it's the KiCAD 5.1.2 project.
- rSTM32F030C8T6.schematic.pdf the schematic.
Update: STCore v2.0 includes support for this MCU, if you're using STCore v2.0 you don't need to install anything.
- This requires the STM32 core for arduino, the ST original.
- I used this guide to add the board, you can check it or continue with my suggestions to install the new board.
- Copy the "RBOARD_F030C8T6" folder to the Arduino "variants" folder, in win7 is located at: c:\Users\<USERNAME>\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.6.1\variants
- Edit the "boards.txt" file, in win7 is located at a lever up than the "variants" folder, search for the F030F4 board and add the lines to leave it as I show you next:
# DEMO_F030F4 board
# Support: Serial1 (USART1 on PA3, PA2)
GenF0.menu.pnum.DEMO_F030F4=STM32F030F4 Demo board
GenF0.menu.pnum.DEMO_F030F4.upload.maximum_data_size=4096
GenF0.menu.pnum.DEMO_F030F4.upload.maximum_size=16384
GenF0.menu.pnum.DEMO_F030F4.build.mcu=cortex-m0
GenF0.menu.pnum.DEMO_F030F4.build.board=DEMO_F030F4
GenF0.menu.pnum.DEMO_F030F4.build.series=STM32F0xx
GenF0.menu.pnum.DEMO_F030F4.build.product_line=STM32F030x6
GenF0.menu.pnum.DEMO_F030F4.build.variant=DEMO_F030F4
GenF0.menu.pnum.DEMO_F030F4.build.cmsis_lib_gcc=arm_cortexM0l_math
# RBOARD_F030C8T6 board
# Support: Serial1 (USART1 on PA3, PA2)
GenF0.menu.pnum.RBOARD_F030C8T6=STM32F030C8 STProMiniPlus
GenF0.menu.pnum.RBOARD_F030C8T6.upload.maximum_data_size=8192
GenF0.menu.pnum.RBOARD_F030C8T6.upload.maximum_size=65536
GenF0.menu.pnum.RBOARD_F030C8T6.build.mcu=cortex-m0
GenF0.menu.pnum.RBOARD_F030C8T6.build.board=RBOARD_F030C8T6
GenF0.menu.pnum.RBOARD_F030C8T6.build.series=STM32F0xx
GenF0.menu.pnum.RBOARD_F030C8T6.build.product_line=STM32F030x8
GenF0.menu.pnum.RBOARD_F030C8T6.build.variant=RBOARD_F030C8T6
GenF0.menu.pnum.RBOARD_F030C8T6.build.cmsis_lib_gcc=arm_cortexM0l_math
The ProMini+ running the Adafruit ILI9341 library over hardware SPI.
Video in progress...