Skip to content

r45ku1/beam-mine

BranchesTags

Repository files navigation

BEAM OPEN SOURCE POOL GUIDE

(With credit to Greg of Icemining Pools for his excellent efforts in building the stratum and pool, Lolliedieb for the Beamhashverify to enable this pool to switch between BeamHashI, BeamHashII and BeamHashIII and also to VSnation for the magically unique BASiC payment processor)

Open Source Beam Pool Software w/ Guide

By installing the pool software and BASiC Payment processor from this guide, you fully agree to this following disclaimer:

DISCLAIMER: This Beam open source pool software comes with no warranty and it is the sole responsibility of the user to ensure the functions and design of their own deployment, meet the required standards which a cryptocurrency miner would expect to see in a mining pool. Where the code is complete in-as-much as the pool stratum, API and a barebones deployment of the GUI is functional and working, it is also the responsibility of the user to ensure that they have adept knowledge in pool systems. This code is offered freely under MIT licencing and the authors, host and publishers will hold no responsibility, nor support for installation or troubleshooting.

The pool software is also now offered with Beam’s BASiC rewards distribution function and this part is contained in accompanying repository, with it’s own README file and same disclaimer above applies.

A testing pool built from this software can be found at https://pool.raskul.com/ – so, you can see what you will get by navigating to this link.

All OK with that? then read on…

To begin compiling the Beam open source pool software, you will need to find a suitable VPS (Virtual Private Server) from a respectable hosting company. On the BEAM ACCEPTED HERE pages you can find a few who accept Beam for their services.

Once you have found a VPS, please log in and you can start to set up the pool.

Firstly update your server.

sudo apt update

sudo apt upgrade

Next, install the required dependencies to build and run the pool

sudo apt install python-dev build-essential libsodium-dev npm libboost-all-dev libboost-dev

You will also need to install NODEJS 10.x and MYSQL, separately from the above dependencies

sudo apt install curl

curl -sL https://deb.nodesource.com/setup_10.x | sudo -E bash -

sudo apt-get install -y nodejs

sudo apt install -y mysql-server

Update & Upgrade again just to make sure all these are current releases.

sudo apt-get update

sudo apt-get upgrade

Next, install REDIS SERVER

sudo apt-get install redis-server

and enable the REDIS service

sudo systemctl enable redis-server.service

This will then require a server reboot…

sudo reboot now

Once reboot is complete, log into your server again as root and install php-redis

sudo apt-get install php-redis

You are now ready to clone the repository which holds all the pool code!

git clone https://github.com/r45ku1/beam-mine.git

Go into the beam-pool folder and make sure it’s up to date.

cd beam-mine

npm update

npm install

Now you need to configure your MYSQL Db’s

cd /etc/mysql/mysql.conf.d/

nano /etc/mysql/mysql.conf.d/mysqld.cnf

and edit the line as shown:

bind-address            = 0.0.0.0

save the file.

You will now want to build the Beam node and Wallet which will link to the pool stratum, and amend your config files.

cd

mkdir beam-node

cd beam-node

wget https://beam.mw/downloads/mainnet-linux (and use the node link )

tar -xvf beam-node-VERSION.tar.gz

wget https://beam.mw/downloads/mainnet-linux (and use the wallet link )

tar -xvf beam-wallet-VERSION.tar.gz

Make a subfolder named stratum_secrets

mkdir stratum_secrets

cd stratum_secrets

You will need to now generate a set of ssl key/certificate for your pool, to do this run the following command

openssl req -x509 -newkey rsa:4096 -keyout beam-stratum-key.pem -out beam-stratum-crt.pem -days 3650 -nodes -subj '/CN=localhost’

Now rename the two files created in this process using.

mv beam-stratum-key.pem stratum.key
mv beam-stratum-crt.pem stratum.crt

You will now have one file stratum.key and one file stratum.crt in this folder. Go back up a level

cd ..

Next step will be to choose a password for the wallet and add it to your beam-wallet.cfg file. Open the beam-wallet.cfg file using a text editor

nano beam-wallet.cfg

and put your password at the command line:

pass=YOURPASSWORD

Uncomment the line by removing the single # sign.

Also amend there:

node_addr=127.0.0.1:10127

Again, uncomment this line by removing the single # sign.Those are the only 2 configurations that must be done on beam-wallet.cfg Save the file and close it.

You can now initiate your Beam Pool wallet

./beam-wallet init

Save the output info in a safe place. This is your seed phrase and wallet default address, into which all mined coins from the pool, will be stored prior to distribution to your miners

You will also want to set that default address to never expire

./beam-wallet change_address_expiration --address=YOURDEFAULTWALLETADDRESS --expiration_time=never

Next you will need two keys to configure them the node. Please run the following command

./beam-wallet export_miner_key --subkey=1

./beam-wallet export_owner_key

Take the keys and put in the beam-node.cfg on the lines

owner_key=

&

miner_key=

Uncomment the line by removing the single # signs on each line. Now edit #password for keys in beam-node.cfg so that it matches #password for the wallet in beam-wallet.cfg – this is the password that you created previously.

pass=YOURPASSWORD

Whilst still within a text editor in beam-node.cfg, locate each of the below lines and amend;

port=10127
log_level=verbose
file_log_level=verbose
peer=node01.mainnet.beam.mw:8100,eu-node02.mainnet.beam.mw:8100,eu-node03.mainnet.beam.mw:8100,eu-node04.mainnet.beam.mw:8100,us-node01.mainnet.beam.mw:8100,us-node02.mainnet.beam.mw:8100,us-node03.mainnet.beam.mw:8100,us-node04.mainnet.beam.mw:8100,ap-node01.mainnet.beam.mw:8100,ap-node02.mainnet.beam.mw:8100,ap-node03.mainnet.beam.mw:8100,ap-node04.mainnet.beam.mw:8100,ap-hk-node01.mainnet.beam.mw:8100,ap-hk-node02.mainnet.beam.mw:8100,ap-hk-node03.mainnet.beam.mw:8100,ap-hk-node04.mainnet.beam.mw:8100
peers_persistent=1
stratum_port=3333
stratum_secrets_path=./stratum_secrets/

Open a new command line window which you are prepared to leave open (or screen -dmS it) all the time – this command window will contain the perpetual node connection. It is imperative that this process is never stopped. Navigate into your beam-node folder and start the node by typing;

./beam-node

Whilst allowing the node to synchronise and depending on your device firewall settings, you may need to “allow” it to open all the ports required to run the pool. Have a separate terminal window open for extra commands (these are all the hard-coded ports which the pool will utilise)

sudo ufw allow 10127

sudo ufw allow 8010

sudo ufw allow 80

sudo ufw allow 1690

sudo ufw allow 3333

sudo ufw allow 6379

sudo ufw allow 6543

sudo ufw allow 3306

sudo ufw allow 666

Let the node synchronise with the network by downloading the Beam blockchain. This may take a while, depending on your connection speed. Once fully synchronised, you will see your Beam node collect the most up to date block height. Compare the node height with https://explorer.beam.mw/ and ensure it matches before continuing. The % will also show 100% in the node printout.

Once the node is fully synchronised, use a command line window which you are prepared to leave open all the time (or screen -dmS it). Navigate within the command line to your beam-node folder and type:

./beam-wallet listen

This enables the Beam pool wallet to perpetually listen at the Beam node. Now let’s move onto your MYSQL database setup. Use an third-party software (such as sequelpro) to manage your schema tables. You will also need to create a MYSQL USER outside of ROOT to manage your Beam database (which we will create as follows…)

mysql -u root

CREATE USER 'newMYSQLuser'@'localhost' IDENTIFIED BY 'MYSQLpassword';

GRANT ALL PRIVILEGES ON *.* TO 'newMYSQLuser'@'localhost';

FLUSH PRIVILEGES;

And confirm your new user has privileges

SHOW GRANTS FOR 'database_user'@'localhost';

Now in your MYSQL third party software (sequelpro or similar) create your tables within a new database ‘beam’

CREATE TABLE `accounts` (
  `id` int(11) unsigned NOT NULL AUTO_INCREMENT,
  `coinid` int(11) DEFAULT NULL,
  `username` varchar(96) DEFAULT NULL,
  `ip` varchar(96) DEFAULT NULL,
  PRIMARY KEY (`id`)
) ENGINE=InnoDB AUTO_INCREMENT=3 DEFAULT CHARSET=utf8mb4;

CREATE TABLE `blocks` (
  `id` int(11) unsigned NOT NULL AUTO_INCREMENT,
  `coinid` int(11) DEFAULT NULL,
 `time` int(18) DEFAULT NULL,
  `userid` int(11) DEFAULT NULL,
  `workerid` int(11) DEFAULT NULL,
  `height` int(11) DEFAULT NULL,
  `paid` tinyint(1) DEFAULT NULL,
  `paid_at` int(96) DEFAULT NULL,
  `sharediff` float DEFAULT NULL,
  `blockdiff` float DEFAULT NULL,
  `confirmations` float DEFAULT NULL,
  `difficulty` float DEFAULT NULL,
  `blockhash` varchar(64) DEFAULT NULL,
  `reward` float DEFAULT NULL,
  `category` varchar(32) DEFAULT NULL,
  `jobid` int(11) DEFAULT NULL,
  PRIMARY KEY (`id`)
) ENGINE=InnoDB AUTO_INCREMENT=202 DEFAULT CHARSET=utf8mb4;

CREATE TABLE `shares` (
  `id` int(11) unsigned NOT NULL AUTO_INCREMENT,
  `coinid` int(11) DEFAULT NULL,
  `userid` int(11) DEFAULT NULL,
  `blockhash` varchar(64) DEFAULT NULL,
  `height` int(11) DEFAULT NULL,
  `difficulty` double DEFAULT NULL,
  `sharediff` double DEFAULT NULL,
  `workerid` int(96) DEFAULT NULL,
 `time` int(18) DEFAULT NULL,
  PRIMARY KEY (`id`)
) ENGINE=InnoDB AUTO_INCREMENT=2000 DEFAULT CHARSET=utf8mb4;

CREATE TABLE `workers` (
  `id` int(11) unsigned NOT NULL AUTO_INCREMENT,
  `userid` int(11) DEFAULT NULL,
  `ip` varchar(96) DEFAULT NULL,
  `name` varchar(96) DEFAULT NULL,
  `difficulty` int(11) DEFAULT NULL,
  `rigname` varchar(32) DEFAULT NULL,
 `time` int(18) DEFAULT NULL,
  PRIMARY KEY (`id`)
) ENGINE=InnoDB AUTO_INCREMENT=28 DEFAULT CHARSET=utf8mb4;

EDIT YOUR CONFIGURATION FILES

LOCATION: beam-mine/config.json

should be amended in the REDIS sections

    "redis": {
    "host": "127.0.0.1",
    "port": 6379,
    "password": ""

and in the website section, to reflect the IP of the VPS upon which you are installing the pool (the below example is Raskul Beam Pool, please use your own IP, and port remains 8010).

    "website": {
    "enabled": true,
    "host": "94.130.104.164",
    "port": 8010,
    "stratumHost": "94.130.104.164",
    "stats": {

LOCATION beam-mine/pool_configs/beam.json amend to specify the path to your stratum.key and stratum.crt

 },
 "tlsOptions": {
 "enabled": true,
 "serverKey": "../stratum_secrets/stratum.key",
 "serverCert": "../stratum_secrets/stratum.crt",
 "ca": ""

and in the MYSQL section (mposMode section) this should reflect the newMYSQLuser and MYSQLpassword you created earlier

    },
    "mposMode": {
    "enabled": true,
    "host": "127.0.0.1",
    "port": 3306,
    "user": "newMYSQLuser",
    "password": "MYSQLpassword",
    "database": "beam",
    "checkPassword": false,
    "autoCreateWorker": true
    }

LOCATION beam-mine/libs/beam-blockconf.js amend const=api and the MYSQL pieces

 const coinid = 2423;
 const coin_symbol = 'BEAM';
 const confirmations = 240;
 const api = 'http://127.0.0.1:666';
 module.exports = async function() {
 const connection = await mysql.createConnection({
 host: '127.0.0.1',
 user: 'newMYSQLuser',
 password: 'MYSQLpassword',
 database: 'beam',

LOCATION beam-mine/libs/stats.js amend the MYSQLconnection here;

 async function setupMysqlConnection() {
 this.connection = await mysql.createConnection({
 host: '127.0.0.1',
 user: 'newMYSQLuser',
 password: 'MYSQLpassword',
 database: 'beam',

INSTALL THE WALLET-API

From the web page at https://github.com/BeamMW/beam/releases find the most recent version of the Linux Explorer Node

wget https://github.com/BeamMW/beam/releases/download/WALLET-API.tar.gz

tar -xvf WALLET-API.tar.gz

Amend the configuration file within this folder as follows

nano wallet-api.cfg

Amend the password to match your owner key password

pass=yourpassword

node address to listen the api server on

node_addr=127.0.0.1:101274

port to start server on

port=11111

use JSON RPC over http

use_http=1

INSTALL THE EXPLORER-NODE (API)

From the web page at https://github.com/BeamMW/beam/releases find the most recent version of the Linux Explorer Node

wget https://github.com/BeamMW/beam/releases/download/EXPLORER-NODE.tar.gz

tar -xvf EXPLORER-NODE.tar.gz

And amend the configuration file within this folder as follows

nano explorer-node.cfg

Peer address to point the local api server to

peer address

peer=YOUR SERVER IP:PORT

port to start the local api server on

api_port=666

owner key from node setup steps

key_owner=YOUR_OWNER_KEY_FROM_NODE_CONFIGURATION

password for owner key

pass=YOUR_PASSWORD_FROM_NODE_CONFIGURATION

TIME TO GET IT ALL RUNNING!

Give your server a quick reboot

sudo reboot now

Once powered up and logged in, make sure you have your node 100% synch and screen it, buy going into beam-node folder and using the following command:

screen -dmS NODE ./beam-node

Navigate into your beam-explorer folder and run the API using. the following command:

screen -dmS EXPLORER ./explorer-node

Run the wallet API (and enable offline payments):

screen -dmS API ./wallet-api --enable_lelantus

Set up your wallet listener from within the beam-node folder:

screen -dmS LISTEN ./beam-wallet listen -n YOURSERVERIP:10127

RUN THE POOL

From within the beam-pool folder, run the command as follows;

screen -dmS POOL node init.js

Your (very basic) pool GUI will then be publicly accessible from

http://YOUR_POOL_IP:8010

If you wish to utilise it, you can now set up the BASiC Payment Processor from https://github.com/r45ku1/basic

All code released with no warranty and no support assistance.

About

Open source mining pool for Beam

Resources

Readme

License

MIT license
Activity

Stars

6 stars

Watchers

2 watching

Forks

18 forks
Report repository

Releases

No releases published

Packages

No packages published

Contributors 2

  •  
  •  

Languages