c🌀nfigent (1.113.13)

No startup pitches, I am a DevOps principled environment bootstrapper.

• Work must finish by running one command. Mouse is not productivity.
• Does not install 10s of tools most of which can be run ad-hoc in a container.
• 95% consistent user experience both on macOS and the beloved Linux distros.
• There is only one way to manage programming languages and tool versions.
• Runs local open source LLMs for Copilot-like code completion in editor.

A few features:

• One character .aliases: The fastest are the commands one does not type.
• Apps are Rust, Go and C for speed, and nix-shells are for ad-hoc binaries.
• macOS docker experience like it was with Docker Desktop but without cost.
• Run up to upgrade every package manager but respect locked tool versions.
• Quickly ask GPT in terminal (a <question>) or open a chat session (ai).

Works on x86-64 and ARM:

• macOS Sequoia (15), Sonoma (14) and Ventura (13)
• Ubuntu Linux 24.04 LTS (Noble Numbat) and 22.04 LTS (Jammy Jellyfish)
• Debian Linux 12 (Bookworm) and 11 (Bullseye)
• Fedora Linux 38, 37 and 36
• CentOS Stream 9 and 8
• AlmaLinux 9 and 8
• Rocky Linux 9 and 8
• Oracle Linux 9 and 8
• openSUSE Leap 15.4
• Arch Linux (rolling; since 2022-07)
• Alpine Linux 3.19, 3.18 and 3.17

Minimum requirements are 4GB RAM and 12GB disk, on which it takes <30 minutes.

🥾 Up

Already existing dotfiles are overridden without prompting. There is no uninstaller currently.

If in doubt, test drive in a virtual machine.

Installer requires only curl available:

curl -fsSL https://raw.githubusercontent.com/raas-dev/configent/1.113.13/install.sh | sh

Things are installed primarily per-user, but to install system-wide requirements (such as git), sudo password may be asked in the beginning.

The respective git tag from this repository is cloned in ~/configent, or main branch is pulled on top of the git working copy if it already exists.

User's configs (dotfiles, symlinks and directories) overridden are backed up in ~/configent/.backup with same directory hierarchy as they located in $HOME.

Server (default)

Script install.sh is non-interactive and suitable for cloud-init when run as user with passwordless sudo.

The defaults are what is most often used in software development in cloud. If you want to deviate from it, the fastest is to fork this repository, make changes and cURL your public fork.

GUI apps are not installed by install.sh as a server is assumed, unless you explicitly pass FLATPAKS=true (Linux distros) or CASKS=true (macOS) to the script.

Desktop

Alternatively, you can run bootstrap in the git working copy (~/configent) to install GUI apps.

Add or remove GUI apps to your liking in bin/install_apps_flatpak (Flatpak on Linux distros) or bin/install_apps_cask (Homebrew Cask on macOS).

To use GUI apps on Linux distros, you have to install Xorg, display manager and window manager of your choice. See your distro's own instructions for that.

🔋's included

Script bootstrap essentially handles the whole automated setup (dotfiles, apps, editor) of the machine it is run in. These three respective scripts are described further below.

Necessities (such as Zsh) are installed from the Linux distro's repo, or from Homebrew if it is runnable on the OS and the CPU architecture.

The script is non-interactive: Due to this, and though Zsh is preferred, it is not set as the user's default shell. You may do it and get prompted, possibly asked sudo, by running bin/install_zsh after bootstrap has finished.

symlink_dotfiles

Symlinks are created in in the user's home directory for all the files in dotfiles/. Files or symlinks of the same name at $HOME are overridden.

Starship, Topgrade, Neovim and htop configs are symlinked in ~/.config, which is a standard config search path on many operating systems.

Directory bin in this repository is symlinked to ~/.local/configent/bin, taking 1st preference in PATH. Directory etc in this repository is symlinked to ~/.config/configent.

Restart the shell or run source ~/.bashrc. Then on, you may simply reload the configuration of the current shell (.bashrc or .zshrc) with r and all the scripts in bin/ are available by name from now on.

💡: Export your own environment variables in ~/.rclocal. Git name and email are automatically exported here if they were set in your previous .gitconfig.

install_apps

If you want to adjust high level tech stacks, modify this script.

What's installed by default:

1. Command-line necessities and compile-time requirements
2. GUI apps by Homebrew Cask (macOS) or Flatpak (Linux distros)
3. Zsh plugin manager and plugins (Zsh from brew if Homebrew is available)
4. Rust, Go, Node.js, Python and .NET language runtimes and default packages
5. Vim, Vundle (plugin manager for Vim) and Vim bundles (Vim plugins)
6. Neovim with LazyVim (Neovim from brew if Homebrew is available)
7. Tmux plugins and config (tmux from brew if Homebrew is available)
8. Ollama is installed, started and configured to start on boot
9. AWS and Azure development tools, script linters
10. Terminess monospace font

Apt, yum (dnf), zypper, pacman and apk package managers are recognized and used to install requirements from Linux distro's repository (requires sudo rights). Flatpaks (GUI apps) are always installed user-wide.

On macOS, Homebrew is used to install requirements and casks (GUI apps) user-wide.

Language runtimes and development tools are always installed user-wide by asdf. Global versions are defined in ~/.tool-versions. Whenever possible, asdf plugins are preferred over Homebrew.

⚠️: Homebrew may or may not be present after installation, as Homebrew Linux does not work on ARM.

With Homebrew on Linux (x86-64), system-wide installation (/home/linuxbrew) is preferred, but if it this not possible (no sudo), it is installed user's home. In both cases, Zsh, Neovim and tmux are installed using Homebrew on Linux, as it likely has newer versions than the ones gotten from the distro's repo.

💡: See asdf documentation for locking project specific versions.

setup_vscode / setup_vscodium

VSCodium is the default editor on Linux distros and VSCode is the default on macOS.

The script symlinks vscode/ to <os_specific_path>/User. Existing User directory is first backed up to ~/configent/.backup/<os_specific_path>/User.

If editor is present, its extensions (vscode/extensions.list) are installed using the command-line tool of the editor.

To update the list after adding or removing extensions in VSCode/VSCodium, run vscode/create_extensions_list.

setup_continue

The script copies the VSCode/VSCodium Continue extension configuration files and installs Node.js packages used by the configuration.

You must export the API keys loaded by ~/.continue/config.ts in ~/.rclocal.

🐚 Default shell

Set zsh as the user's default shell:

install_zsh

If you prefer bash instead:

install_bash

If Homebrew is available (Linux distros on x86-64, macOS on x86-64 or ARM), Zsh and Bash are installed from Homebrew and preferred over system-wide shells (respectively), as Homebrew likely has newer versions available.

🏗️ Containers

Supported container runtimes:

• the original OCI compatible runtime was Docker (used by Docker Desktop)
• containerd is the industry-standard (CNCF) runtime in Kubernetes deployments
• third option is Podman, which is nearly Docker compatible daemonless runtime

These bin/ shims wrap the container CLIs to use those runtimes:

• docker: Runs Docker CLI, installing build and compose CLI plugins when used
• nerdctl: Runs nerdctl (on containerd), which has build and compose built-in
• podman: Runs Podman CLI (on daemonless Podman), but lacks proper compose

See rootless containers as those are preferred.

macOS

Container runtimes base on Linux kernel features not present on macOS. Thus Lima is used for creating Linux VMs on QEMU.

The aforementioned shims create and start the necessary virtual machines: VM 'ubuntu' for Docker, VM 'debian' for ontainerd and VM 'fedora for Podman.

In addition, VM 'debian' has k3s for testing on Kubernetes. See VM's startup message for exporting KUBECONFIG to use it with kubectl.

The following host directories are mounted read-write for VMs:

• $HOME/dev
• $HOME/Downloads
• /tmp/lima

docker shortcut

Alias d is a shortcut for building Docker image in the current directory. Dockerfile is read if present, otherwise nixpacks is used to detect the tech stack and build the image best-effort.

⚠️: Ensure the Docker image you are building FROM is safe before proceeding.

After the image is built, a new container is launched from it. If .env file is present in the current directory, its environment variables are set in the container.

If you use PORT=8000 d, the port given is mapped to the host and environment variable PORT is set inside the container. Note that this takes precedence if PORT is also defined in .env file.

If d -d or d --detached is used, all arguments are passed to docker run. CMD defined in Dockerfile is effective. ENTRYPOINT defined in Dockerfile (or by nixpacks) is effective, unless you override it in arguments.

If container was started as detached and successfully started up, docker logs are followed. Sending ^C exits the log view and does not stop the container.

If -d or --detached is not used, an interactive session is assumed and all arguments are passed to docker run entrypoint /bin/sh -c as commands, e.g. d bash starts Bash in the container. Exiting the shell stops the container.

⚠️: If container writes to filesystem, you must be in a VM writable directory.

❄️ Nix

Nix is not installed on the host, but alias nixd starts a container where nix, nix-env, nix-shell, etc. are available. The container image is built by etc/nix/Containerfile.

The environment is created in the current directory and alias n is used e.g. n vim README.md to run Vim in an isolated nix-shell on containerd.

Package name(s, separated by forward slashes) are taken as the first argument. The packages are installed from channel unstable.

The binary is assumed named according to the first package. The rest of the arguments are passed to the binary. If binary name is different from the package name, put meta-package "shell" first, e.g. n shell/postgresql psql.

You can expose PORT on the host, e.g. PORT=8000 n python3 -m http.server.

⚠️: If binary writes to filesystem, you must be in a VM writable directory.

💡: Use n for command-line tools not wanted permanently installed on the host. See .aliases for example ad-hoc tools such as container image scanners.

🔨 QEMU

See dotfiles/.aliases for vm4... creating Lima VMs to test on various Linux distros.

💡: See alias v for starting, shelling into, stopping and deleting a VM.

VMs are provisioned by cloud-init on boot by pulling and running install.sh from this repository's main branch.

⚠️: Regardless of pulling main, the version to install is defined in install.sh and is only updated by release.sh.

You may willingly live on the edge by explicitly passing GIT_REF:

curl -fsSL https://raw.githubusercontent.com/raas-dev/configent/main/install.sh | GIT_REF=main sh

For development purposes, once the VM has been started, host's $HOME/configent is mounted read-only in the VM. This enables testing most changes without first committing and pushing to your fork.