GROW R503 Fingerprint

---

Features

• Written in pure python.
• Provides all the manufacturer specified operations of the module.
• Can be connected with a computer directly with a USB to TTL converter. (Do not need a microcontroller)
• Can be used for testing the functionality of the module or creating direct applications without involving a microcontroller.

---

Interfacing

Wiring connections:

Sensor Side	RS232 Converter
Red (power)	3.3v Power
White (touch induction power)	3.3v power
Black (Ground)	Ground (0v)
Maroon or Green or Brown (Rx)	Tx
Yellow (Tx)	Rx
Blue (Wakeup)	Not connected

(Ref: Datasheet)

• Make sure to use 3.3v power supply unless you have the 5v version of the sensor.

• If you use a separate 3.3v power supply other than the RS232 converters power then make sure to connect grounds together (common ground).

• The line order is according to the colors, even though the note says it's not.

---

Usb to TTL

• This module can be used to interface with the module since it provides 5v to 3.3v conversion for both logic level and power.
• However, make sure to switch jumper position to the 3.3v and connect 3.3v power pin of the converter.

---

Installation

• Run pip install pyserial on terminal.

• Download r503.py file.

Basic usage overview

---

Registering a fingerprint

from r503 import R503

fp = R503(port=5)
fp.manual_enroll(location=7)

• you have to place the finger 4 (changeable) times on the sensor during the process

Terminal output:

Place your finger on the sensor: 1
Reading the finger print
Character file generation successful.
Place your finger on the sensor: 2
Reading the finger print
Character file generation successful.
Place your finger on the sensor: 3
Reading the finger print
Character file generation successful.
Place your finger on the sensor: 4
Reading the finger print
Character file generation successful.
registering a finger print
finger print registered successfully.

---

Search a Fingerprint from the stored data

from r503 import R503
from time import sleep

fp = R503(port=5)

print('Place your finger on the sensor..')
sleep(3)
print(fp.search())

Terminal output:

Place your finger on the sensor..
(0, 7, 90)

• first value = success if 0
• second value = stored location of the memory
• third value = match score

---

Number of fingerprints in the memory

from r503 import R503

fp = R503(port=5)
print('Num of templates: ', fp.read_valid_template_num())

Terminal output:

Num of templates: 3

---

Read fingerprint stored locations

from r503 import R503

fp = R503(port=5)
print(fp.read_index_table())

Terminal output:

[7, 15, 32]

---

Aura LED Control

from r503 import R503

fp = R503(port=5)
fp.led_control(ctrl=3, color=5)

Output: LED keeps on with a specific color according to the number

---

Read Product Information

from r503 import R503

fp = R503(port=5)

for k, v in fp.read_prod_info_decode().items():
    print(k, ': ', v)

Terminal output:

module type :  R5xx1111
batch number :  1111
serial number :  10080307
hw main version :  1
hw sub version :  1
sensor type :  GR192RGB
image width :  192
image height :  192
template size :  1536
fp database size :  200

---

For Linux users: if a permission error occurs while opening the serial port, run following command:

sudo chmod a+rw /dev/ttyUSB{your device port number}

Etc:

sudo chmod a+rw /dev/ttyUSB0