Skip to content

ryanclark/development

Repository files navigation

Teleport Development Environment

This helps you run a local Teleport environment locally at https://go.teleport, with trusted local certificates (no --insecure anywhere).

It sets up a single Teleport service that runs the Auth and Proxy services, as well as a container to run Vite so you can build both Teleport and the Web code at the same time. It also runs Application Access with the debug dumper app.

File changes for the Teleport repo are sync'd and then air watches for any changes to your local Teleport repo, and will rebuild and relaunch Teleport when you change a .go or .yaml file.

This uses caching for both Go and Vite, so although the first initial run will take a few minutes, subsequent runs of make start will build both Teleport and the frontend and have them up and running in <5s.

make help

Teleport

Setup

Directory Setup

This assumes you have your local directory structure setup something like:

~/go/src/github.com/gravitational
└── teleport
│   └── api
│   │   │ go.mod
│   │   │ etc...
│   │
│   └── e
│       └── lib
│       └── tool
│       └── web
│       └── etc...
│   │
│   └── lib
│   │
│   └── tool
│   │
│   └── web
│       └── packages
│           └── teleport
│       └── etc...
│   │
│   │ go.mod
│   │ etc...

You should clone this directory so it's next to teleport.

~/go/src/github.com/gravitational
└── development
│   └── frontend
│   │   │ Dockerfile
│   │
│   └── teleport
│       │ Dockerfile
│   │
│   │ docker-compose.yml
│   │ etc...
│
└── teleport
│   └── api
│   │   │ go.mod
│   │   │ etc...
│   │
│   └── e
│       └── lib
│       └── tool
│       └── web
│       └── etc...
│   │
│   └── lib
│   │
│   └── tool
│   │
│   └── web
│       └── packages
│           └── teleport
│       └── etc...
│   │
│   │ go.mod
│   │ etc...

You don't have to have the enterprise submodules cloned if you do not want to build the enterprise version.

mkcert

You'll need mkcert, which is a quick and easy way to create local, trusted certificates.

If you're on macOS, you can install mkcert via

brew install mkcert

You should then run

mkcert -install

Finally, to setup the certificates we need, run:

make cert

Docker

You'll also need Docker running.

For an Apple Silicon Mac, I've found that enabling the new virtualization framework and therefore enabling VirtioFS accelerated directory sharing has yielded a very fast environment.

You should increase your Docker resource limits. Give it as much as you can spare, for the fastest performance building and running Teleport locally. The CPUs should be maybe n-1 or n-2 of your total available. Memory can probably be between 50-75% of what your machine has.

DNS resolution

You'll need go.teleport to resolve to 0.0.0.0. If you're using a service like NextDNS, it's easy to do this in their control panel.

If you aren't, you can sudo vim /etc/hosts and add:

0.0.0.0 go.teleport
0.0.0.0 dumper.go.teleport

If you wish to use a domain other than go.teleport, do a search and replace of any instance of go.teleport with the domain you pick. This is because the Docker container's hostname and name need to match, so Teleport realises it's running normally (as the proxy address and host address aren't different), and doesn't try to launch you into an app and put you in an infinite redirect loop when you try to go to the web UI.

Running

To start, run:

make start

This will build the Docker containers if it's your first time running the command, and just start Teleport quickly if you've already ran the command before and have stopped running Teleport since.

The containers will run in detached mode, so you won't have any logs immediately available to you in the console.

You might find it useful to download a tool such as lazydocker which will give you a CLI tool to view and manage all the Docker containers that are all running.

brew install jesseduffield/lazydocker/lazydocker

lazydocker logs

lazydocker stats

Or, if you prefer a GUI, DockStation for Mac is also good.

DockStation logs

DockStation stats

If you wish to have all the logs visible to you in one go and attach your current terminal to Docker compose, you can run this instead:

make start-attach

Stopping this command will stop the development environment.

The Teleport container has tctl built as part of the build process. This speeds up the build of Teleport by air when the container launches (as most of the Go packages have been downloaded and there's a populated Go cache), as well as provides tctl to be able to create the initial first user.

Once Teleport has finished initializing, you can run:

make setup

Which will create the initial admin user for you.

Logs

To get and follow the logs from the frontend or the logs from Teleport, you can run

make frontend-logs
make teleport-logs

To get any other logs you can run

make logs servicename # or
make logs -- -f servicename # -- is needed when passing in flags (such as -f for follow)

Stopping

To stop the running Docker contains, run:

make stop

Swapping between Teleport versions

As this lives next to your teleport and webapps directories, you can just checkout whatever branch you need to work on in either repo.

teleport

When changing the major version of teleport, you should re-run make build. This is because tctl is built to live inside the container, as is teleport if you're using static services that don't live reload.

tctl and teleport change quite a bit between major versions, so a rebuild ensures these binaries are on the same major version that the live reloading services are on.

webapps

When changing the major version of webapps, you should make sure you run yarn inside webapps before re-running make start. There shouldn't be any need to run make build.

Building Enterprise

To build the enterprise version of tctl, teleport and the frontend, create a file called .e.

You'll want to run make build first before re-running make start when swapping between enterprise and OSS.

You can choose not to run a build to just swap the frontend between OSS and Enterprise, but a rebuild is needed for the tctl and teleport binaries inside the containers.

If you're using live-reload defined services, you may not need to rebuild as the presence of the .e file tells air to build either the OSS or Enterprise. The tctl binary in the container will still be incorrect, however.

If you're using static defined services, you will need to rebuild.

Commands

Opening a shell

You can open an interactive shell to either the frontend or Teleport via:

make teleport-shell
make frontend-shell

tctl

tctl lives inside the Teleport container, so to run the equivalent of tctl get users, you can run:

make tctl get users

Adding another Teleport service

The quickest way to add another Teleport node is to extend node from base/docker-compose.yml. You just need to create a new folder for the node (e.g. node2) with a teleport.yaml file inside - you can copy the existing one from node/teleport.yml and adjust teleport.nodename.

Then, in docker-compose.yml, add something like

  node2:
    container_name: node2 # for the sake of not having it named `development-node2-1`
    hostname: node2 # set the hostname to node2 also
    extends:
      file: base/docker-compose.yml
      service: node
    volumes:
      - ./data/node2:/var/lib/teleport
      - ./node2/teleport.yaml:/etc/teleport.yaml

In the docker-compose.yml, you'll see there are two types of Teleport services running, and they're defined a little differently.

Services that rebuild on code changes

If you want to rebuild Teleport on every file change, you'll want to copy how the Auth Service (go.teleport) is setup, like this:

  service-name:
    container_name: service-name
    build:
      dockerfile: development/build/Dockerfile
      context: ..
      target: live-reload
    volumes:
      - ../teleport:/app/:rw,delegated
      - ./data/cache/service-name/go-pkg:/go/pkg/mod:rw,delegated
      - ./data/cache/service-name/go:/root/.cache/go-build,delegated
      - ./data/service-name:/var/lib/teleport
      - ./build/.air.toml:/app/.air.toml
      - ./service-name/teleport.yaml:/etc/teleport.yaml

And create a folder called <service-name> with a teleport.yaml inside, configured how you need it to be. You might find it useful to add a static token to teleport/teleport.yaml, so the Teleport service can instantly join the Auth Service.

The key things in this config are the target being live-reload - this uses the Dockerfile up until it's built tctl, and then air will run which will build Teleport, start it, and rebuild it and restart it on file changes.

Services that do not need to rebuild on code changes

If you're only working the Auth Service code, it would be a bit annoying if you were running an SSH agent and that also kept rebuilding, even though you're not editing the code.

To setup a service in this way, copy the configuration for the node service in docker-compose.yml.

  service-name:
    container_name: service-name
    build:
      dockerfile: development/build/Dockerfile
      context: ..
      target: static
    volumes:
      - ./data/service-name:/var/lib/teleport
      - ./service-name/teleport.yaml:/etc/teleport.yaml

The target that's specified is now static, which will build tctl, skip past air, build teleport and the run teleport start -d. This means you now have a static instance which won't respond to code changes.

You'll still need to create a folder for <service-name> with a teleport.yaml file like mentioned above.

Other info

Only running Teleport, not Vite too

You can go into "solo" mode, where Vite isn't running alongside Teleport and instead you're just getting the webassets built into the Teleport binary.

To do this, create a file called .solo. The presence of this file will result in docker-compose.solo.yml being the compose file (so all make targets will still work with the different file) and you'll be running Teleport without Vite in front.

When swapping between solo mode and normal, you just need to re-run make start. There's nothing that needs to be rebuilt.

Config File

The config file for Teleport is in teleport/teleport.yaml. This is volume mounted into the container, so if Teleport is meant to react to a config change whilst running, you'll see this behavior.

If you need to change the config that requires a restart of Teleport, just stop your make start and re-run it.

Teleport License

When enterprise is enabled, this builds the Enterprise version of both Teleport and Webapps. It pulls in the enterprise license will full features by default, but if you wish to change it to any of the other license types, you can just change the file name that's mounted in docker-compose.yml.

Rebuilding the Docker image

If you need to rebuild tctl or rebuild the Docker images for whatever reason, you can run

make build

You'll then need to re-run make start.

To completely wipe your workspace, run:

make clean

Which will remove all containers and volumes created by Docker.

Make commands reference

You can also run make help to get a list of the available Make targets.

Controlling container lifecycle

  • make start - starts (and builds, if not present) the Docker containers in detached mode
  • make start-attach - starts (and builds, if not present) the Docker containers and attaches to the output of them
  • make stop - stops all containers

Building & cleaning

  • make build - builds/rebuilds the Docker images
  • make clean - removes all Docker containers and volumes
  • make down - removes all Docker containers

Setup

  • make cert - creates the self-signed certificate for go.teleport and *.teleport with mkcert
  • make setup - sets up the default admin user via an alias to make tctl users add admin --roles=editor,access --logins=root,ubuntu,ec2-user

Commands

  • make frontend-logs - alias for make logs -- -f frontend
  • make frontend-shell - open an interactive shell inside the frontend container
  • make logs <command> - runs docker compose logs <command>
  • make tctl <command> - runs tctl inside the Teleport container
  • make teleport-logs - alias for make logs -- -f go.teleport
  • make teleport-shell - open an interactive shell inside the Teleport container

About

No description, website, or topics provided.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published