This code is outdated and unmaintained, so not sure if it works anymore
SSD1306 display library for the ESP8266 board (modified from Adafruit_SSD1306 https://github.com/adafruit/Adafruit_SSD1306)
This ESP_SSD1306 library is a copy of the Adafruit_SSD1306 library with some modifications in order to work with the ESP8266 board.
This library is intended to be used with the Arduino IDE from https://github.com/esp8266/arduino which supports ESP8266 boards.
Place the ESP_SSD1306 library folder to your /libraries/ folder. You may need to create the libraries subfolder if its your first library. Restart the IDE.
You will also have to download the Adafruit GFX Graphics core which does all the circles, text, rectangles, etc. You can get it from https://github.com/adafruit/Adafruit-GFX-Library and download/install that library as well
This is a library for our Monochrome OLEDs based on SSD1306 drivers
Pick one up today in the adafruit shop! ------> http://www.adafruit.com/category/63_98
These displays use SPI to communicate, 4 or 5 pins are required to
interface
Adafruit invests time and resources providing this open source code, please support Adafruit and open-source hardware by purchasing products from Adafruit!
Written by Limor Fried/Ladyada for Adafruit Industries.
Scrolling code contributed by Michael Gregg
BSD license, check license.txt for more information
All text above must be included in any redistribution
To download. click the DOWNLOADS button in the top right corner, rename the uncompressed folder Adafruit_SSD1306. Check that the Adafruit_SSD1306 folder contains Adafruit_SSD1306.cpp and Adafruit_SSD1306.h
Place the Adafruit_SSD1306 library folder your /libraries/ folder. You may need to create the libraries subfolder if its your first library. Restart the IDE.
You will also have to download the Adafruit GFX Graphics core which does all the circles, text, rectangles, etc. You can get it from https://github.com/adafruit/Adafruit-GFX-Library and download/install that library as well