Skip to content

CANBus reverse engineering firmware for Teensy 3.x boards

Notifications You must be signed in to change notification settings

streber42/TeensyRET

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

13 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Teensy-RET

Reverse Engineering Tool based around a custom board with a socket for Teensy 3.6. The board also has SN65HVD234 transceivers, an I2C to OneWire interface chip, and an Adafruit BLE module. Only the transceivers are relevant to this project but the project is setup to use pin 2 for enabling CAN0 and pin 35 for CAN1 enable. Set this as appropriate for your designs or to 255 to disable if no enable pin is needed.

The project builds with the Arduino IDE with the TeensyDuino add-on

WARNING: This is currently an early port of GVRET. Some things won't work, some things will crash. But, initial testing shows compatibility with SavvyCAN, ability to read frames to the console, and stability at high bus loads.

Requirements:

1.6.x Arduino IDE

TeensyDuino 1.31 or newer

FlexCAN library from me (https://github.com/collin80/FlexCAN_Library)

SDCard-Beta library (https://github.com/greiman/SdFat-beta)

The canbus is supposed to be terminated on both ends of the bus. This should not be a problem as this firmware will be used to reverse engineer existing buses.

License:

This software is MIT licensed:

Copyright (c) 2014-2017 Collin Kidder, Michael Neuweiler, Charles Galpin

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

About

CANBus reverse engineering firmware for Teensy 3.x boards

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C++ 97.9%
  • C 2.1%