Skip to content

A practical way to set up and launch a self-hosted bitwarden instance with automatic SSL certificate creation and renewal using nginx webserver and vaultwarden served with docker.

License

Notifications You must be signed in to change notification settings

svenpieper/docker-nginx-vaultwarden-ssl

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

21 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation


Logo

docker-nginx-vaultwarden-ssl


A practical way to set up and launch a self-hosted bitwarden instance with automatic SSL certificate creation and renewal using nginx webserver and vaultwarden served with docker.

Request Feature · Report Bug

Table of contents
  1. About the Project
  2. Prerequisites
  3. Installation
  4. Usage
  5. Recommended Settings
  6. Contributing
  7. License
  8. References

About the project

This repo gives you the possibility to run your own Bitwarden servers at home or on KVMs. I use the popular Docker image vaultwarden, a relatively small docker image that even runs on Raspberry Pis with >= 1 GB RAM. All you need is your own domain and a server. If this server is located at home you have to enable portforwarding. More about this in the prerequisites. The setup is very simple: Run the install.sh script and the rest is almost done by itself. Since the whole thing is supposed to run over HTTPS, a certificate will be generated via Lets Encrypt for your domain. As an additional goodie, a cronjob is created on your machine, which checks daily if this certificate is still valid. If not, it will be renewed immediately. Automatically and free of charge. Nginx serves as reverse proxy.

Prerequisites

1. Install Docker and Docker Compose

1.1. Update and Upgrade

First of all make sure that the system runs the latest version of the software. Run the command:

sudo apt-get update && sudo apt-get upgrade

1.2. Install Docker

Now is time to install Docker! Fortunately, Docker provides a handy install script for that, just run:

curl -fsSL test.docker.com -o get-docker.sh && sh get-docker.sh

1.3. Add a Non-Root User to Docker Group

By default, only users who have administrative privileges (root users) can run containers. If you are not logged in as the root, one option is to use the sudo prefix. However, you could also add your non-root user to the Docker group which will allow it to execute docker commands. The syntax for adding users to the Docker group is:

sudo usermod -aG docker <your_username>

To add the permissions to the current user run:

sudo usermod -aG docker ${USER}

Check it running:

groups ${USER}

Reboot your system to let the changes take effect.

1.4. Install Docker-Compose

Docker-Compose usually gets installed using pip3. For that, we need to have python3 and pip3 installed. If you don't have it installed, you can run the following commands:

Removing old Python versions:

sudo apt-get remove python*

Installing Python 3.10:

sudo add-apt-repository ppa:deadsnakes/ppa
sudo apt-get update
sudo apt-get install -y libffi-dev libssl-dev
sudo apt install -y python3.10-dev
sudo apt-get install -y python3.10 python3-pip

Once python3 and pip3 are installed, we can install Docker-Compose using the following command:

sudo pip3 install docker-compose

1.5. Enable the Docker system service to start your containers on boot

This is a very nice and important addition. With the following command you can configure your system to automatically run the Docker system service, whenever it boots up.

sudo systemctl enable docker

With this in place, containers with a restart policy set to always or unless-stopped will be re-started automatically after a reboot.

1.5.a For WSL users: Enable Docker system start at startup

WSL does not know systemctl, so we have to use a different approach to make docker run at startup. Open ~/.profile and add the following section at the end of the file:

# make docker run automatically at wsl startup
if service docker status 2>&1 | grep -q "is not running"; then
    wsl.exe -d "${WSL_DISTRO_NAME}" -u root -e /usr/sbin/service docker start >/dev/null 2>&1
fi

1.6. Run Hello World Container

The best way to test whether Docker has been set up correctly is to run the Hello World container. To do so, type in the following command:

docker run hello-world

Once it goes through all the steps, the output should inform you that your installation appears to be working correctly. In addition to that you can also run this command to get the installed docker version:

docker version

1.7. Check Docker Compose Installation

Last but not least, check if Docker Compose is working correctly. To do so, create a file named docker-compose.helloworld.yml and fill it with this content:

version: '3'
services:
    hello-world:
        image: hello-world:latest

Then run this hello-world container from the created docker-compose file:

docker-compose -f docker-compose.helloworld.yml up

2. Set A Record

2.1 Get IP of your machine

Get your IPv4 address by visiting this site or running curl ifconfig.me

2.2 Go to your domain vendor and set the A record for your (sub)domain to your local IP

This setting will redirect the call to the domain in a browser or similar to the IP you got earlier. If you are running vaultwarden on a server in your home network, make sure you have port forwarding set for the server's IP and ports 80 and 443. Otherwise your server will only be accessible within your network. Some ISPs do not provide customers with a IPv4 address. It is required for this setup. However, many of these providers offer one upon request.

2.3 Setup DynDNS for your machine

It is not very common for ISPs to offer a fixed IPv4 address. This means that this address is changed at regular intervals. This can happen, for example, when the router is restarted. This means that the A record at your domain provider is no longer valid and is not routed correctly. Therefore we have to ask regularly for the current IPv4 address and renew it at the domain provider. Many of these providers offer an API for this.

To automate this process you can for example write your own Python script that sends the required HTTP request in case of a change. You can find a simple example in this repo (/etc/update_dns_record.py). For privacy reasons I have commented the crucial function only schematically. Here you have to adapt the HTTP request to the API interface of your domain provider.

Installation

So everything is installed so far? Now it is time to start the stack. For this there is the install.sh script in this repo. This automates the whole process from creating an init-server for getting the certificates, creating custom configs, to starting the actual vaultwarden and nginx instance. Finally, a cronjob is created which checks daily if the current certificate is still valid. If not, a new one is generated and loaded into the container. Pretty handy, isn't it? It is important that you pass your domain and email address as parameters to the script. Only then letecrypt can generate your certificates and nginx can be configured correctly. It is important to say here again that you must have already set the A record to your IP address at this point and the port forwarding must be set correctly. But here now the command:

chmod +x install.sh
./install.sh <example.domain.de> <[email protected]>

After the script finishes without errors you should have access to your self-hosted vaultwarden under example.domain.de. Create an account there and remember your master password, this is now your access code to the rest of your secure passwords. At this point you should set the Docker environment variable SIGNUPS_ALLOWED to false and restart the container. You can do this with docker-compose up -d. This means that no more people can now create accounts.

If you don't have a fixed IPv4 address you can check it regularly and change your A record if it changes. Many domain providers offer API interfaces to change them via HTTP GET request. I have provided the update_dns_record.py script under etc/ for this. Here you only have to change the URL and the credentials to your needs. After that you can simply start the python script once in the background. It will check every 6 hours if your address has changed and if the change was successful. The logs for this are stored under /logs. Please also make sure that you adjust CURR_IP, HOSTNAME, APIKEY and if necessary INTERVAL_S in the Python script.

Usage

Visit example.domain.de, log in with your password and enjoy your own vaultwarden. Of course, you can also use the Bitwarden Apps for Windows, Linux, iOS, Android or Mac to access it on the go without having to use the browser. However, you must refer to your own custom server. To do this, before you log in to the app, go to the settings screen and set the server url to your own domain, https://example.domain.de. After that you can log in as usual.

Recommended settings

Your vaultwarden is up and running and accessible? Great! But I recommend you to change some settings to improve your security a bit or to make the usage more relaxed. Do to so go to the settings within your Bitwarden App installed on your phone.

Security

  • Tresor-Timeout: immediately
  • Action when Tresor Timeout: lock
  • Activate 2FA
  • Clear clipboard: 20 seconds

For the very paranoid: Set WEB_VAULT_ENABLED to false in the docker-compose.yml file and restart the container. This will disable login via a browser. If the subsequent 404 response bugs you, you can also provide your own index.html via WEB_VAULT_FOLDER. This will be displayed instead. Make sure you rebuild your container after changing docker environment variables. Just run: docker-compose up --force-recreate. While we're at it: Did you set WEB_VAULT_ENABLED to false? You'd better do it.

Relaxed stuff

  • Activate Fingerprint or FaceID activation for your phone
  • Activate Passwort Autofill
  • Set up available app extensions

Contributing

Contributions are what make the open source community such an amazing place to learn, inspire, and create. Any contributions you make are greatly appreciated. If you have a suggestion that would make this better, please fork the repo and create a pull request. You can also simply open an issue with the enhancement tag. Don't forget to give the project a star! Thanks again!

  1. Fork the Project
  2. Create your Feature Branch (git checkout -b feature/AmazingFeature)
  3. Commit your Changes (git commit -m 'Add some AmazingFeature')
  4. Push to the Branch (git push origin feature/AmazingFeature)
  5. Open a Pull Request

License

Distributed under the GNU General Public License. See LICENSE for more information.

References

About

A practical way to set up and launch a self-hosted bitwarden instance with automatic SSL certificate creation and renewal using nginx webserver and vaultwarden served with docker.

Topics

Resources

License

Stars

Watchers

Forks