Skip to content

whimsicalraps/wslash-bootloader

 
 

Repository files navigation

stm32f7-bootloader

Audio bootloader for the ???

nb: the below is not directly applicable. needs to be updated for this new project.

//

The core of this bootloader is from the stm-audio-bootloader from pichenettes. The bootloader.cc file has been modified, and interface/driver files have been added for use with the hardware UI of the Spectral Multiband Resonator (SMR).

The SMR project is located here

This bootloader works with SMR code that's less than 480kB in size. The reason for this limit is because the audio file is flashed into the upper sectors first (kStartReceiveAddress), and then copied over to the execution sectors (kStartExecutionAddress) only once all data has been received.

Setting up your environment

Set up the environment exactly as you would in the SMR project

Compiling

To compile, simply run:

make

This creates bootloader.bin and bootloader.elf files in the build/ directory


To flash the bin file to your SMR hardware using an st-link programmer:

make flash

This will program the first sector with the bootloader (0x08000000). Note that in the stock SMR, the second sector (0x08004000) is used for system settings, so the bootloader must fit into the first 16kB sector or else the SMR code will need to be altered to prevent over-writing the bootloader.


To combine the bootloader with the SMR application code into one bin file:

make combo

This requires ../SMR/build/main.bin to be already present. A new file combo.bin will be created.


To flash combo.bin using an st-link programmer:

make combo_flash

About

Audio bootloader for the SMR project

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C 89.3%
  • C++ 7.4%
  • Makefile 3.3%