Skip to content

Companion repo for running examples against the luma.oled, luma.lcd, luma.led_matrix and luma.emulator display drivers.

License

Notifications You must be signed in to change notification settings

yetie/luma.examples

 
 

Repository files navigation

luma.core | luma.docs | luma.examples | luma.emulator | luma.lcd | luma.led_matrix | luma.oled

Luma.Examples

https://travis-ci.org/rm-hull/luma.examples.svg?branch=master

https://img.shields.io/maintenance/yes/2017.svg?maxAge=2592000

This is the companion repo for running examples against the luma.emulator, luma.oled, luma.lcd and luma.led_matrix display drivers.

Installation instructions

Assuming you are using a Raspberry Pi (running Debian Jessie or newer), follow the pre-requisites & instructions in the above repositories to wire up your display, then from a command-line:

$ sudo usermod -a -G i2c,spi,gpio pi
$ sudo apt install python-dev python-pip libfreetype6-dev libjpeg-dev build-essential
$ sudo apt install libsdl-dev libportmidi-dev libsdl-ttf2.0-dev libsdl-mixer1.2-dev libsdl-image1.2-dev
$ sudo -H pip install --upgrade pip setuptools
$ sudo apt purge python-pip

Log out and in again and clone this repository:

$ git clone https://github.com/rm-hull/luma.examples.git
$ cd luma.examples

Finally, install the luma libraries using:

$ sudo -H pip install -e .

Running the examples

After cloning the repository, enter the examples directory and try running one of the following examples listed below. For example:

python examples/3d_box.py
Example Description
3d_box.py Rotating 3D box wireframe & color dithering
animated_gif.py Renders an animated GIF
bitstamp_ticker.py Display the Bitcoin price at Bitstamp
bitstamp_realtime.py Displays the latest Bitcoin trades in realtime at Bitstamp
bounce.py Display a bouncing ball animation and frames per second
carousel.py Showcase viewport and hotspot functionality
chroma.py Trippy color rendering demo
clock.py An analog clockface with date & time
colors.py Color rendering demo
crawl.py A vertical scrolling demo, which should be familiar
demo.py Use misc draw commands to create a simple image
font_awesome.py A meander through some awesome fonts
game_of_life.py Conway's game of life
grayscale.py Greyscale rendering demo
image_composition.py Displays different song titles and scrolls them back and forth
invaders.py Space Invaders demo
jetset_willy.py Sprite animation framework demo
maze.py Maze generator
perfloop.py Simple benchmarking utility to measure performance
picamera_photo.py Capture photo with picamera and display it on a screen
picamera_video.py Capture continuous video stream and display it on a screen
pi_logo.py Display the Raspberry Pi logo (loads image as .png)
runner.py Sprite animation framework demo
savepoint.py Example of savepoint/restore functionality
scrolling_pixelart.py Image dithering and viewport scrolling
sprite_animation.py Using sprite maps for animation effects
starfield.py 3D starfield simulation
sys_info.py Display basic system information
terminal.py Simple println capabilities
tv_snow.py Example image-blitting
tweet_scroll.py Using Twitter's Streaming API to display scrolling notifications
video.py Display a video clip
weather.py 3-day weather forecasts from the BBC
welcome.py Unicode font rendering & scrolling

By default, all the examples will asume I2C port 1, address 0x3C and the ssd1306 driver. If you need to use a different setting, these can be specified on the command line – each program can be invoked with a --help flag to show the options:

$ python examples/demo.py --help
usage: demo.py [-h] [--config CONFIG] [--display] [--width WIDTH]
               [--height HEIGHT] [--rotate] [--interface]
               [--i2c-port I2C_PORT] [--i2c-address I2C_ADDRESS]
               [--spi-port SPI_PORT] [--spi-device SPI_DEVICE]
               [--spi-bus-speed SPI_BUS_SPEED] [--gpio GPIO]
               [--gpio-data-command GPIO_DATA_COMMAND]
               [--gpio-reset GPIO_RESET] [--gpio-backlight GPIO_BACKLIGHT]
               [--block-orientation] [--mode] [--framebuffer] [--bgr]
               [--h-offset H_OFFSET] [--v-offset V_OFFSET]
               [--backlight-active] [--transform] [--scale SCALE]
               [--duration DURATION] [--loop LOOP] [--max-frames MAX_FRAMES]

luma.examples arguments

optional arguments:
  -h, --help            show this help message and exit

General:
  --config CONFIG, -f CONFIG
                        Load configuration settings from a file (default:
                        None)
  --display , -d        Display type, supports real devices or emulators.
                        Allowed values are: ssd1306, ssd1322, ssd1325,
                        ssd1331, ssd1351, sh1106, pcd8544, st7735, ht1621,
                        uc1701x, max7219, ws2812, neopixel, neosegment,
                        apa102, capture, gifanim, pygame, asciiart (default:
                        ssd1306)
  --width WIDTH         Width of the device in pixels (default: 128)
  --height HEIGHT       Height of the device in pixels (default: 64)
  --rotate , -r         Rotation factor. Allowed values are: 0, 1, 2, 3
                        (default: 0)
  --interface , -i      Serial interface type. Allowed values are: i2c, spi,
                        bitbang (default: i2c)

I2C:
  --i2c-port I2C_PORT   I2C bus number (default: 1)
  --i2c-address I2C_ADDRESS
                        I2C display address (default: 0x3C)

SPI:
  --spi-port SPI_PORT   SPI port number (default: 0)
  --spi-device SPI_DEVICE
                        SPI device (default: 0)
  --spi-bus-speed SPI_BUS_SPEED
                        SPI max bus speed (Hz) (default: 8000000)

GPIO:
  --gpio GPIO           Alternative RPi.GPIO compatible implementation (SPI
                        devices only) (default: None)
  --gpio-data-command GPIO_DATA_COMMAND
                        GPIO pin for D/C RESET (SPI devices only) (default:
                        24)
  --gpio-reset GPIO_RESET
                        GPIO pin for RESET (SPI devices only) (default: 25)
  --gpio-backlight GPIO_BACKLIGHT
                        GPIO pin for backlight (PCD8544, ST7735 devices only)
                        (default: 18)

Misc:
  --block-orientation   Fix 90° phase error (MAX7219 LED matrix only).
                        Allowed values are: 0, 90, -90, 180 (default: 0)
  --mode                Colour mode (SSD1322, SSD1325 and emulator only).
                        Allowed values are: 1, RGB, RGBA (default: RGB)
  --framebuffer         Framebuffer implementation (SSD1331, SSD1322, ST7735
                        displays only). Allowed values are: diff_to_previous,
                        full_frame (default: diff_to_previous)
  --bgr                 Set if LCD pixels laid out in BGR (ST7735 displays
                        only). (default: False)
  --h-offset H_OFFSET   Horizontal offset (in pixels) of screen to display
                        memory (ST7735 displays only) (default: 0)
  --v-offset V_OFFSET   Vertical offset (in pixels) of screen to display
                        memory (ST7735 displays only) (default: 0)
  --backlight-active    Set to "low" if LCD backlight is active low, else
                        "high" otherwise (PCD8544, ST7735 displays only).
                        Allowed values are: low, high (default: low)

Emulator:
  --transform           Scaling transform to apply (emulator only). Allowed
                        values are: identity, led_matrix, none, scale2x,
                        seven_segment, smoothscale (default: scale2x)
  --scale SCALE         Scaling factor to apply (emulator only) (default: 2)
  --duration DURATION   Animation frame duration (gifanim emulator only)
                        (default: 0.01)
  --loop LOOP           Repeat loop, zero=forever (gifanim emulator only)
                        (default: 0)
  --max-frames MAX_FRAMES
                        Maximum frames to record (gifanim emulator only)
                        (default: None)

Note

  1. Substitute python3 for python in the above examples if you are using python3.
  2. python-dev (apt-get) and psutil (pip/pip3) are required to run the sys_info.py example. See install instructions for the exact commands to use.

Emulators

There are various display emulators available for running code against, for debugging and screen capture functionality:

  • The luma.emulator.device.capture device will persist a numbered PNG file to disk every time its display method is called.
  • The luma.emulator.device.gifanim device will record every image when its display method is called, and on program exit (or Ctrl-C), will assemble the images into an animated GIF.
  • The luma.emulator.device.pygame device uses the pygame library to render the displayed image to a pygame display surface.

Invoke the demos with:

$ python examples/clock.py --display capture

or:

$ python examples/clock.py --display pygame

Documentation

Full documentation with installation instructions can be found in:

License

The MIT License (MIT)

Copyright (c) 2017 Richard Hull & Contributors

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

About

Companion repo for running examples against the luma.oled, luma.lcd, luma.led_matrix and luma.emulator display drivers.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Python 100.0%