###GPIO U3+ ####Developed by: Zaid Daba'een

A simple python library to control the three GPIO pins on the Odroid U3+.

Clone the library using:

git clone https://github.com/zaiddabaeeen/gpiou3p

###Usage

Simply import the library

import gpiou3p as gpio

####Writing to the pin

1. Setup the pin directions

    gpio.setup(gpio.PIN.GPIO199, gpio.DIRECTION.OUT)
   

2. Write to the pin

    gpio.write(1, gpio.PIN.GPIO199)
   

####Reading the pin

1. Setup the pin directions

    gpio.setup(gpio.PIN.GPIO199, gpio.DIRECTION.IN)
   

2. Read the pin

    gpio.read(gpio.PIN.GPIO199)
   

Check example.py file for an example case that blinks an LED.

You need sudo privileges to be able to edit the GPIO pins on the Odroid U3+

###More Information Check out the blog post http://nasa.z-proj.com/accessing-gpio-pins-on-the-odroid-u3/ for more information on the GPIO pins and schematics.

###License GNU GPL V3