Skip to content

Jupiter

friznit edited this page Feb 24, 2023 · 26 revisions

Background

Juno II (BDB Chryslus) was derived from the USAF Jupiter missile and used as a launch vehicle in the 1950's and 60's for Pioneer and Explorer satellites. Not to be confused with Juno I, which was derived from the US Army Redstone-Jupiter-C missile development programme, it did nevertheless use the same Sergeant (Vicenza) upper stage, though sometimes ommitting the fourth stage to allow for extra payload capacity.

The three-stage Juno IV was a concept design that was never flown, having been made obsolete by the introduction of the more capable Atlas launch vehicle. The fuel load of each stage needs to be adjusted to the mission profile, with maximum upper stage loading for low orbit missions offset by a lower first stage propellant load.

Tags: Chryslus

Variants

Launch Vehicle First Stage Second Stage Third Stage Fourth Stage
Juno II Chryslus-3DS Polaris Vincenza
Juno IVA Chryslus-3DS Polaris Chryslus-6K Seeker Vicenza
Juno IVB Fenris-RL79-218 Odin Chryslus-45K Hunter Chryslus-6K Seeker Vicenza

Basic Build Guide

The Jupiter first stage tank and 6K third stage tank are under-fuelled by default. Propellant loading should be adjusted depend on the mission profile with reduced upper stage loading offset by increased first stage propellant and vice-versa.

Fourth Stage

  • "Vicenza" SRM cluster & payload

Third Stage

  • BD-SPD-05 Decoupler
  • Chryslus-IVA-160 Liquid Fuel Tank
  • Chryslus-IV-K6 "Seeker" Liquid Engine
  • Chryslus-IVB-SIA 1.25m Structural Interstage (Short part switch)

Second Stage

  • Chryslus-IVB-440 Liquid Fuel Tank
  • Chryslus-IVB-EMS 1.25m Engine Mount
  • Chryslus-IV-K45 "Hunter" Liquid Engine
  • Chryslus-IVB-SIA 1.25m Structural Interstage (Long part switch)

First Stage

  • Chryslus-IIAGC Guidance Unit
  • Chryslus-2000 Liquid Fuel Tank
  • Chryslus-EF Engine Fairing
  • RL79 Liquid Engine (Chryslus-3DS "Polaris" & Jupiter Exhaust part switch)
  • Chryslus-EE5 "Rhesus" Vernier Exhaust Engine (placed on engine fairing and lined up with the exhaust on the Polaris)

Boosters

  • Dioscuri-ESMR Radial Decoupler (in 4x Symmetry)
  • Dioscuri Solid Rocket Booster (Dioscuri-1 part switch)

image

Juno II

Clone this wiki locally